Introduction
Thank you for choosing TECOMLIGHT RGBCW LED Puck Lights. This manual provides detailed instructions for the safe and efficient use of your new lighting system. Please read this manual thoroughly before installation and operation, and retain it for future reference.
Important Safety Information
- Battery Safety: Each puck light requires 3 AA batteries (not included). Ensure correct polarity when inserting batteries. Do not mix old and new batteries, or different types of batteries. Remove batteries if the product is not used for an extended period. Dispose of used batteries responsibly.
- Indoor Use Only: These lights are designed for indoor and dry locations only. Do not expose to water or high humidity.
- Installation: Ensure the mounting surface is clean, dry, and smooth for optimal adhesive performance. If using screws, ensure the surface can support the light without damage.
- Cleaning: Clean the lights with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Disassembly: Do not attempt to disassemble or modify the product. This will void the warranty and may cause damage or injury.
Package Contents
The TECOMLIGHT RGBCW LED Puck Lights package includes the following items:
- Puck Lights (Quantity: 4)
- Remote Control (Quantity: 1)
- Double-sided Adhesive Pads
- Small Screws for Mounting
- User Manual
Image: Contents of the TECOMLIGHT RGBCW LED Puck Lights package, showing four puck lights, a remote control, and color options.
Product Features
- Battery Operated: No wiring required, offering flexible placement. Each light uses 3 AA batteries (not included).
- Easy Installation: Mounts easily with included double-sided adhesive pads or screws.
- Multiple Color Temperatures: Provides Warm White (2700K), Natural White (4000K), and Cool White (6000K) options.
- Multi-Colored Lighting: Features 15 vivid static colors and 2 dynamic light modes (Smooth and Flash) for various moods and events.
- Dual Control Options:
- Tap Control: Short press the front cover to turn on/change color; long press to turn off.
- Remote Control: Full control over settings, colors, brightness, and timers.
- Dimmable: 10 brightness levels, adjustable from 10% to 100%.
- Timer Function: Default auto-off after 4 hours. Remote allows setting timers for 30, 60, or 120 minutes.
- Versatile Application: Ideal for bookshelves, display cabinets, pantries, kitchens, closets, and other indoor locations.
Image: Visual representation of the puck light's main features, including battery operation, remote control, dimming, and color options.
Setup and Installation
Your TECOMLIGHT Puck Lights offer two installation methods: adhesive pads or screws.
1. Battery Installation
- Twist the front cover of the puck light counter-clockwise to open it.
- Insert 3 AA batteries (not included) into the battery compartment, ensuring correct polarity (+/-).
- Align the cover and twist clockwise to securely close the puck light.
Image: Instructions for inserting AA batteries into the puck light.
2. Mounting Options
Choose the method that best suits your surface and needs.
Method A: Adhesive Pads (Recommended for smooth surfaces)
- Clean the desired mounting surface thoroughly to ensure it is free of dust and grease.
- Peel off one side of the double-sided adhesive pad.
- Attach the adhesive pad firmly to the back cover of the puck light.
- Peel off the other side of the adhesive pad.
- Press the puck light firmly onto the cleaned surface for at least 30 seconds. For best adhesion results, wait a few hours before inserting batteries or applying pressure.
Method B: Screws (Recommended for rough or uneven surfaces, or for a more permanent fix)
- Twist the back cover of the puck light counter-clockwise to detach it.
- Position the back cover on the desired mounting surface. Mark the screw holes with a pencil.
- Drill small pilot holes if necessary, then secure the back cover to the surface using the provided screws.
- Align the puck light with the secured back cover and twist clockwise to fasten it.
Image: Step-by-step visual guide for both adhesive and screw mounting methods.
3. Remote Control Preparation
Before first use, remove the plastic insulation tab from the battery compartment of the remote control.
Operating Instructions
Manual Control (Tap Function)
- Turn On/Change Color: Short press the front cover of the puck light. Each short press will cycle through the available colors (Warm White, Natural White, Cool White, and 15 RGB colors).
- Turn Off: Long press the front cover for approximately 2 seconds.
Image: Demonstrates both manual tap control and remote control for the puck lights.
Remote Control Functions
The included remote control allows for comprehensive management of your puck lights. Point the remote directly at the lights for optimal response.
- ON/OFF: Press the ON button to turn on all paired lights. Press the OFF button to turn off all paired lights.
- Brightness Adjustment: Use the Sun Up and Sun Down buttons to increase or decrease brightness (10 levels from 10% to 100%).
- Color Temperature Selection:
- WW (Warm White): 2700K
- NW (Natural White): 4000K
- CW (Cool White): 6000K
- Static Color Selection: Choose from 15 vibrant RGB colors by pressing the corresponding color buttons.
- Dynamic Light Modes:
- SMOOTH: Lights will smoothly transition between colors.
- FLASH: Lights will flash between colors.
- Timer Settings: Set the lights to automatically turn off after a specified duration.
- 30MIN: Turns off after 30 minutes.
- 60MIN: Turns off after 60 minutes.
- 120MIN: Turns off after 120 minutes.
Image: Detailed view of the remote control and its various functions.
Video: Official product video demonstrating the remote and tap control features of the TECOMLIGHT Puck Lights, including color changes and brightness adjustments.
Maintenance
- Cleaning: Wipe the surface of the puck lights with a soft, dry cloth. Avoid using liquid cleaners or sprays directly on the device.
- Battery Replacement: Replace all 3 AA batteries in a puck light simultaneously when the light dims or stops functioning. Do not mix old and new batteries.
- Storage: If storing the lights for an extended period, remove all batteries to prevent leakage and damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Dead or incorrectly inserted batteries. | Replace with fresh AA batteries, ensuring correct polarity. |
| Remote control not working. | Remote battery is dead or insulation tab not removed. Obstruction between remote and light sensor. | Remove insulation tab. Replace remote battery. Ensure clear line of sight to the light's sensor. |
| Lights are out of sync or respond inconsistently. | Interference or remote signal not reaching all lights evenly. | Point the remote directly at each light or adjust your position. Ensure the light's IR sensor (small cutout) is facing towards you. |
| Adhesive not holding. | Surface was not clean or smooth. Insufficient pressure applied during installation. | Clean surface thoroughly and reapply a new adhesive pad. Apply firm pressure for an extended period. Consider using screws for a more secure mount. |
Specifications
| Model Name | Puck Lights |
| Model Number | T048 |
| Brand | TECOMLIGHT |
| Power Source | Battery Powered (3 AA batteries per light, not included) |
| Light Source Type | LED |
| Light Color Options | RGB Color Changing, Warm White (2700K), Natural White (4000K), Daylight (6000K) |
| Brightness | 100 Lumens (Max) |
| Dimmable | Yes (10% to 100% in 10 levels) |
| Control Method | Remote, Touch |
| Timer Function | 4 Hours Auto-Off (Default), 30/60/120 Minutes (Remote) |
| Product Dimensions | 3.38 x 3.38 x 1.14 inches |
| Item Weight | 10.8 ounces (per 4-pack) |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Indoor/Outdoor Usage | Indoor Use Only |
Warranty and Support
For any questions, concerns, or technical support regarding your TECOMLIGHT RGBCW LED Puck Lights, please contact our customer service. Refer to your purchase documentation for specific warranty details and contact information. We are committed to providing high-quality products and excellent customer service.
