1. Important Safety Information
Please read this manual thoroughly before installation and operation. Keep this manual for future reference.
- Always disconnect power to the range hood before servicing or cleaning.
- Installation must be performed by a qualified technician in accordance with all local codes and standards.
- Ensure proper ventilation and ductwork are in place.
- Do not operate the range hood if any parts are damaged. Contact customer support immediately.
- This appliance is for household use only.
- To reduce the risk of fire, use only metal ductwork.
2. Product Overview
The CT Copper Tailor SH35-2BT is a handcrafted black stainless steel wall mount range hood designed for efficient kitchen ventilation. It features a powerful 4-speed exhaust fan, LED lighting, and easy-to-clean baffle filters.
2.1 What's in the Box
- Metal Range Hood Cover
- Range Hood Insert
- Baffle Filters
- Grease Tunnel
- User Manual
2.2 Key Features
- Handcrafted 16-gauge stainless steel construction.
- 4-speed fan with up to 1260 CFM ventilation.
- Integrated LED lighting.
- Push button controls.
- Dishwasher-safe baffle filters.
- Delay shutdown feature.
- UL listed and ETL approved for safety.
Figure 1: Front view of the CT Copper Tailor SH35-2BT Wall Mount Range Hood.
3. Installation and Setup
Proper installation is crucial for the performance and safety of your range hood. A shop drawing will be provided upon order placement to assist with precise installation.
3.1 Pre-Installation Checklist
- Verify all components are present and undamaged.
- Ensure adequate structural support in the wall for mounting.
- Confirm electrical supply (120 Volts) is available and meets local codes.
- Prepare an 8-inch round exhaust duct opening.
3.2 Mounting the Range Hood
- Carefully review the provided shop drawing for specific measurements and mounting points.
- Mark the mounting locations on the wall according to the drawing.
- Install appropriate wall anchors or support brackets as required.
- Lift the range hood into position and secure it to the wall mounts.
Figure 2: Product dimensions (21"D x 60"W x 39"H).
3.3 Ductwork and Electrical Connection
- Connect the 8-inch round exhaust top vent to your kitchen's duct system. Ensure a tight seal to prevent air leaks.
- Plug the power cord with the 3-prong plug into a grounded 120V electrical outlet.
- Verify all connections are secure before proceeding.
Figure 3: Top view illustrating the 8-inch round exhaust vent and power cord connection.
4. Operating Instructions
Your range hood is equipped with user-friendly push button controls for fan speed and lighting.
4.1 Fan Operation
- Press the On/Off button to power on the fan.
- Use the Increase Value and Decrease Value buttons to select one of the four fan speeds (up to 1260 CFM).
- To activate the delay shutdown feature, press and hold the On/Off button for 3 seconds while the fan is running. The fan will continue to operate for a set period before automatically turning off.
- Press the On/Off button again to turn off the fan immediately.
4.2 Lighting Control
- Press the Light button to turn the LED lights on or off.
- The LED lights provide illumination for your cooking area.
Figure 4: Illustration of the push button control panel.
Figure 5: The 1260 CFM ventilation system effectively removes odors, traps grease, and removes heat.
5. Maintenance
Regular maintenance ensures optimal performance and longevity of your range hood.
5.1 Cleaning Baffle Filters
The stainless steel baffle filters are dishwasher-safe for easy cleaning.
- Ensure the range hood is turned off and cool before removing filters.
- Locate the release tabs or handles on each baffle filter.
- Pull down or slide the filters out of their slots.
- Place the filters in a dishwasher or wash them by hand with warm, soapy water.
- Allow filters to dry completely before re-installing.
- Slide the clean filters back into their slots until they click securely into place.
5.2 Cleaning the Exterior
The range hood features a fingerprint-resistant surface.
- Wipe the exterior surfaces with a soft cloth and a mild, non-abrasive cleaner.
- Do not use harsh chemicals or abrasive pads, as these can damage the finish.
- Regularly empty and clean the oil collector to prevent grease buildup.
Figure 6: Removable 304 stainless steel baffle filters and adjustable LED light.
6. Troubleshooting
If you encounter issues with your range hood, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on. | No power supply; loose connection; motor fault. | Check power cord and outlet. Ensure circuit breaker is not tripped. Verify connections. If problem persists, contact support. |
| Poor suction. | Clogged filters; obstructed ductwork; incorrect duct size. | Clean baffle filters. Check ductwork for obstructions. Ensure duct size is 8 inches. |
| Lights not working. | Loose connection; faulty LED bulb. | Check light connections. Replace LED bulb if necessary. |
| Excessive noise. | Loose parts; fan imbalance; foreign object in fan. | Inspect for loose screws or components. Check for foreign objects. If noise persists, contact support. |
For issues not listed here, please contact CT Copper Tailor customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | CT Copper Tailor |
| Model Number | SH352BT603921 |
| Product Dimensions (D x W x H) | 21"D x 60"W x 39"H |
| Color | Black Stainless Steel |
| Material Type | Stainless Steel |
| Mounting Type | Wall Mount |
| Air Flow Capacity | 1260 Cubic Feet Per Minute (CFM) |
| Noise Level | 69 Decibels |
| Voltage | 120 Volts |
| Wattage | 240.00 Watts |
| Special Features | Delay Shutdown, Dishwasher-safe Baffle Filters, Four Fan Speeds, Oil Collector, Powerful Vent |
| Certifications | UL listed, ETL approved |
| Item Weight | 85.38 Kilograms |
8. Warranty and Support
8.1 Warranty Information
- Hood Insert: One-year parts warranty.
- Hood Cover: Lifetime warranty.
Please retain your proof of purchase for warranty claims.
8.2 Customer Support
For technical assistance, warranty claims, or to inquire about customization options (including ductless and remote blower ventilation systems), please contact CT Copper Tailor customer service through the retailer where the product was purchased or visit the official CT Copper Tailor website.