Brand Q Portable Charger with Built-in Cables and AC Wall Plug, Slim USB C Power Bank 10000mAh Instruction Manual

Introduction and Overview

Thank you for choosing the Brand Q Portable Charger. This compact and versatile power bank is designed to keep your devices charged on the go, eliminating the need for multiple cables and adapters. With its integrated cables and AC wall plug, it offers a convenient and efficient charging solution for a wide range of mobile devices.

Key Features:

• 5-in-1 Design: Integrates a 10000mAh power bank, built-in charging cables, and an AC wall plug.
• Built-in Cables: Includes Lightning, USB Type-C, and Micro USB cables for direct charging of various mobile phones and tablets.
• Integrated AC Wall Plug: Allows for direct recharging of the power bank from any standard wall outlet without an additional adapter.
• Slim and Compact: Ultra-thin design (0.6 inches) and lightweight for easy portability.
• 10000mAh Capacity: Provides 2.5 to 4 full charges for most smartphones, depending on the device model.
• Universal Compatibility: Compatible with all mobile phones, various tablet models, and other USB-powered devices.
• Safe Charging: UL2056 certified, featuring intelligent power management IC for short circuit, over-current, over-voltage, and over-heat protection.

Setup

Charging the Portable Charger

Before initial use, fully charge your Brand Q Portable Charger. The integrated AC wall plug makes this process simple and convenient.

1. Locate the foldable AC prongs on the back of the power bank.
2. Flip out the AC prongs.
3. Plug the power bank directly into a standard wall outlet.
4. The LED indicators on the front of the device will illuminate to show the charging status. Once all indicators are solid, the power bank is fully charged.
5. After charging, fold the AC prongs back into the device for compact storage.

Initial Device Connection

The portable charger comes with built-in cables for immediate use with most devices.

1. Identify the appropriate built-in cable for your device (Lightning, USB Type-C, or Micro USB).
2. Gently pull out the desired cable from its storage slot on the side of the power bank.
3. Connect the cable to your device's charging port.

Operating Instructions

Charging Your Devices

The Brand Q Portable Charger can charge multiple devices simultaneously using its built-in cables and additional USB ports.

1. Using Built-in Cables: Connect the appropriate built-in cable to your device. The charging process should begin automatically.
2. Using External USB Ports: For devices not compatible with the built-in cables, or to charge additional devices, use your own USB-A or USB Type-C cable and plug it into the corresponding port on the power bank.
3. The LED indicators will show the remaining battery level of the power bank during charging.
4. Once your device is fully charged, disconnect it from the power bank. Return built-in cables to their storage slots.

Checking Battery Level

To check the remaining battery capacity of your portable charger:

• Press the power button located on the front of the device.
• The LED indicators will light up, showing the current charge level. Each light typically represents a percentage range of the total capacity.

Multi-Device Charging

The power bank supports charging multiple devices at once. You can utilize the built-in cables along with the additional USB-A and USB Type-C output ports to charge up to four devices simultaneously.

Maintenance

To ensure the longevity and optimal performance of your Brand Q Portable Charger, follow these maintenance guidelines:

• Storage: Store the power bank in a cool, dry place away from direct sunlight and extreme temperatures.
• Cleaning: Use a soft, dry cloth to clean the exterior of the device. Avoid using harsh chemicals or abrasive materials.
• Battery Longevity: For best battery health, it is recommended to fully discharge the power bank occasionally before recharging it completely to 100%.
• Avoid Physical Damage: Protect the device from drops, impacts, and excessive pressure. Ensure built-in cables are properly stored when not in use to prevent damage.
• Safety: The power bank is equipped with multiple safety features (UL2056 certified) to prevent overcharging, short circuits, and overheating. Do not attempt to disassemble or modify the device.

Troubleshooting

If you encounter any issues with your Brand Q Portable Charger, please refer to the following common solutions:

• Device Not Charging:
  • Ensure the power bank is sufficiently charged. Check the LED indicators.
  • Verify that the charging cable (built-in or external) is securely connected to both the power bank and your device.
  • Try using a different cable or a different port on the power bank.
• Power Bank Not Recharging:
  • Ensure the AC prongs are fully extended and securely plugged into a working wall outlet.
  • Check if the wall outlet is functional by plugging in another device.
• Slow Charging:
  • Ensure you are using appropriate cables for fast charging if your device supports it.
  • Charging multiple devices simultaneously may reduce the charging speed for individual devices.

If the issue persists, please contact customer support for further assistance.

Specifications

Official Product Video

Warranty and Support

Your Brand Q Portable Charger is designed for reliability and performance. For any questions, concerns, or technical support, please contact our customer service team. We are committed to providing friendly customer service and aim to respond within 12 hours.

Please refer to the product packaging or our official website for specific warranty details and contact information.