Instruction Manual for Obida Refrigerator LED Light Module

Introduction

This manual provides essential information for the installation, operation, and maintenance of your Obida Refrigerator LED Light Module. This module is designed as a direct replacement for original parts W11042554, W11527432, W11387579, and W11333374, fitting various Whirlpool, Maytag, and Amana refrigerator models. Please read these instructions carefully before proceeding with installation to ensure proper function and safety.

Image: The Obida Refrigerator LED Light Module, showing the two green circuit boards connected by wires to a white connector.

Image: The Obida LED light module displayed in front of an open refrigerator, illustrating its intended use as a replacement light assembly.

Compatibility Information

Before installation, verify that your refrigerator model is compatible with this LED light module. This module replaces part numbers W11042554, W11527432, W11387579, and W11333374. Refer to your appliance's documentation or the list below for common compatible models.

Image: A visual reminder to check your refrigerator model number against the compatible part numbers (W11042554, W11387579, W11527432, W11333374) to ensure correct product selection.

Image: A graphic listing various compatible Maytag and Whirlpool refrigerator models for the W11042554 LED light module.

Partial List of Compatible Models:

• Maytag: MFI2570FEZ08, MFI2570FEB03, MFI2570FEB04, MFI2570FEW03, MFI2570FEW04, MFI2570FEZ07, MFI2570FEZ11, MFI2570FEZ12, MFI2570FEZ13
• Whirlpool: WRF555SDHV04, WRF555SDHV08, WRF555SDHW01, WRF555SDHW02, WRF555SDHW03, WRX735SDHB01, WRX735SDHB02, WRX735SDHB03, WRX735SDHV01, WRX735SDHV02, WRF555SDFZ09, WRF555SDFZ11, WRF555SDFZ14, WRF555SDFZ15, WRF555SDFZ16, WRF555SDHB01, WRF555SDHB02, WRF555SDHB03, WRF555SDHV03, WRX735SDHV03, WRX735SDHV05, WRX735SDHV06, WRX735SDHV07, WRX735SDHW01, WRX735SDHW02, WRX735SDHW03, WRX735SDHZ02, WRX735SDHZ03, WRX735SDHZ04, WRX735SDHZ06, WRX735SDHZ07, WRX735SDHZ08
• Amana: (Specific models not listed in provided data, but generally compatible with the listed part numbers)

Always cross-reference the part number on your existing module or in your refrigerator's manual to ensure correct fitment.

Setup and Installation

The Obida Refrigerator LED Light Module is designed for easy installation. Follow these steps carefully to replace your existing light module.

Safety Precautions:

• Always disconnect power to the refrigerator before beginning any repair or installation. Unplug the appliance from the wall outlet or turn off the circuit breaker.
• Wear appropriate safety gear, such as gloves, if necessary.
• Handle the new LED module by its edges to avoid damaging the electronic components.

Required Tools:

• Phillips head screwdriver (or similar, depending on your refrigerator's light cover fasteners)

Installation Steps:

1. Step 1: Access the Light Cover. Locate the existing LED light assembly in your refrigerator. Carefully remove the light cover. This may involve unscrewing it or gently prying it off with a flat-head tool.
2. Step 2: Disconnect Old Module. Once the cover is removed, you will see the old LED module. Disconnect the wiring harness from the old module.
3. Step 3: Remove Old Module. Carefully unclip or unscrew the old LED module from its mounting points within the light housing.
4. Step 4: Install New Module. Position the new Obida LED light module into the housing. Ensure it aligns correctly with the mounting points.
5. Step 5: Connect New Module. Connect the refrigerator's wiring harness to the new LED module's connector. Ensure a secure connection.
6. Step 6: Reattach Light Cover. Carefully reattach the light cover, ensuring it is securely fastened.

Image: A six-panel visual guide demonstrating the step-by-step process of replacing the refrigerator LED light module, from removing the cover to connecting the new module.

Image: An illustrative diagram showing the Obida LED light module being installed into the top light housing of a refrigerator, with an arrow indicating placement.

Product Features:

• Waterproof Coating: Equipped with a food-grade waterproof coating for enhanced durability and protection.
• Long-lasting: Designed for extended service life.
• Natural Light: Provides clear, natural illumination within the refrigerator.
• Low Energy Consumption: Efficient LED technology.
• No Radiation: Safe for use in food storage environments.

Image: A visual representation highlighting key features of the LED light module, including its waterproof design, long-lasting performance, and natural light output.

Operation

The Obida Refrigerator LED Light Module operates automatically in conjunction with your refrigerator's door switch. Once installed, the light will illuminate when the refrigerator door is opened and turn off when the door is closed. No manual operation is required for the light module itself.

Maintenance

The Obida Refrigerator LED Light Module is designed to be maintenance-free. Due to its sealed design and long-life LEDs, no regular cleaning or component replacement is necessary under normal operating conditions. If the light module ceases to function, refer to the Troubleshooting section.

Troubleshooting

For issues not listed here, or if troubleshooting steps do not resolve the problem, it is recommended to consult a qualified appliance technician.

Specifications

Image: A detailed view of the LED light module with measurements, showing its length (6.89 inches) and width (1.05 inches), along with the dimensions of the connector (0.87 inches by 0.2 inches).

Warranty Information

Specific warranty details for the Obida Refrigerator LED Light Module are not provided in the product information. Please refer to the seller's return policy or contact the seller directly for warranty inquiries.

Customer Support

For further assistance or technical support regarding the Obida Refrigerator LED Light Module, please contact the seller through the platform where the purchase was made. Direct contact information for Obida customer support is not available in the provided product details.