JOY worker 35" x 20" Electric Standing Desk User Manual

1. Introduction

Thank you for choosing the JOY worker Small Electric Standing Desk. This manual provides essential information for the safe assembly, operation, and maintenance of your new height-adjustable desk. Please read these instructions carefully before use and retain them for future reference.

This electric sit-stand desk features a solid one-piece tabletop measuring 34.6" x 19.7", designed for compact spaces. It offers smooth height adjustment from 28.3" to 46.5" with a quiet motor and includes a memory controller for personalized height settings.

2. Safety Information

• Ensure all components are correctly assembled before use. Refer to the assembly instructions.
• Do not exceed the maximum weight capacity of 176 lbs (79.8 kg) on the desktop.
• Keep children and pets away from the desk during height adjustments.
• Ensure there are no obstructions in the desk's path during movement to prevent collisions. The desk is equipped with anti-collision technology.
• Avoid placing liquids directly on the control panel or near electrical components.
• If any unusual noise, smell, or malfunction occurs, immediately unplug the desk and contact support.

3. Package Contents

Verify that all parts are present before beginning assembly. The package includes:

• Whole Piece Desktop (Grey, 35" x 20")
• Desk Legs (Alloy Steel)
• Digital Control Panel with Memory Controller
• Motor and Transmission Rod
• All necessary screws and assembly tools
• Power Adapter and Cables

Image: All accessories and tools included for easy installation.

4. Setup and Assembly

Assembly is designed to be quick and easy, typically taking around 15 minutes. Follow the included graphical instructions for detailed steps. Ensure you have a Phillips head screwdriver (not included) in addition to the provided tools.

Image: Desk dimensions and weight capacity. Note the 35" x 20" desktop size.

Key Assembly Steps:

1. Attach the desk legs to the desktop using the provided screws.
2. Install the motor and transmission rod, ensuring proper alignment.
3. Mount the digital control panel to the underside of the desktop.
4. Connect all cables from the motor and control panel to the power adapter.
5. Plug the power adapter into a wall outlet.

5. Operating Instructions

Your JOY worker electric standing desk features a user-friendly digital control panel for height adjustment and memory settings.

Image: Digital Control Panel with LED display and memory buttons.

Control Panel Functions:

• Up/Down Arrows (▲ / ▼): Press and hold to manually adjust the desk height. Release to stop.
• LED Display: Shows the current desk height in inches.
• 'S' Button (Set): Used to save a desired height position.
• '1', '2', '3' Buttons: Three programmable memory presets for your preferred sitting or standing heights.

Setting Memory Presets:

1. Adjust the desk to your desired height using the Up/Down arrows.
2. Press the 'S' button. The LED display will show 'S'.
3. Within 3 seconds, press one of the memory buttons ('1', '2', or '3') to save the current height to that preset. The display will show the saved number.

Using Memory Presets:

• Simply press the corresponding memory button ('1', '2', or '3') to automatically move the desk to your saved height.

Smooth and Quiet Operation: The desk adjusts smoothly at 25mm/s with noise levels under 50 dB, ensuring minimal disruption to your work environment.

Image: Ultra Quiet Design, operating at less than 50dB.

Anti-Collision Technology: The desk is equipped with an anti-collision sensor. If an obstacle is detected during height adjustment, the desk will stop and slightly reverse direction to prevent damage.

Image: Anti-collision technology prevents damage by reversing movement upon impact.

6. Maintenance

• Cleaning: Wipe the desktop and legs with a damp cloth. Avoid harsh chemicals or abrasive cleaners.
• Cable Management: Periodically check all cables for secure connections and ensure they are not pinched or damaged.
• Regular Inspection: Inspect the desk for any loose screws or components. Tighten as necessary.

7. Troubleshooting

If you encounter any issues with your desk, refer to the following common problems and solutions. For more detailed visual guidance, please refer to the official troubleshooting videos.

Common Error Codes and Solutions:

• E02: Operation Status Warning
  Issue: Desk stops moving if vibration, impact, or incline are detected.
  Solution: Normally disappears automatically after stopping movement. If not, press and hold the ▼ button for 5 seconds until 'RES' appears. Continue holding until the desk goes to its lowest height and comes back up slightly.
• E20: Overloading Warning
  Issue: Max load exceeded.
  Solution: If raising the desk, remove items from the desktop and try again. If lowering, power off, remove items, power back on, and try again.
• E10: Motor Safety Sensor Can't Be Detected
  Issue: The motor safety sensor is not detected.
  Solution: Power off, check cable interfaces for intactness and ensure ports are not blocked by foreign matter. Reconnect cables and power up. Press and hold the ▼ button for 3 seconds until 'RES' appears.
• E60: Unequal Leg Height Warning
  Issue: The left and right legs are not at the same height.
  Solution: Power off and check if the left and right legs are at the same height. Adjust manually if necessary. Power on again. Press and hold the ▼ button for 5 seconds until 'RES' appears.
• HOT: Overheating Protection
  Issue: Motor doesn't operate continuously for more than 5 minutes.
  Solution: Power off, wait for the screen to go off, then power on again. Alternatively, wait for at least 18 minutes before making any further height adjustment.

8. Specifications

9. Warranty and Support

Warranty: This JOY worker Electric Standing Desk comes with a Limited Warranty. Please refer to the product packaging or original purchase documentation for specific terms and conditions.

Customer Support: For any questions, technical assistance, or warranty claims, please contact the seller, ERGOJOY, through your purchase platform or their official support channels. Ensure you have your model number (GHED121D-1P-88-G) and proof of purchase ready.