BoxWave ClearTouch Crystal Privacy Screen Protector User Manual

Introduction

This manual provides instructions for the installation, usage, and maintenance of your BoxWave ClearTouch Crystal Privacy Screen Protector, designed specifically for the Autophix JSC 2100 device. This screen protector is engineered to offer both privacy and protection for your device's display.

Image: BoxWave ClearTouch Crystal Privacy Screen Protector shown with the Autophix JSC 2100 device, illustrating compatibility.

The ClearTouch Crystal Privacy film offers a unique viewing experience. When viewed directly, the screen's clarity is maintained. However, from side angles (approximately 25 degrees or more), the screen content becomes obstructed, ensuring your privacy. It also provides robust protection against scratches and minor impacts.

Image: Diagram highlighting key features of the ClearTouch Crystal Privacy film, including color brilliance, clarity, precision fit, and reusability.

Setup and Installation

Proper installation is crucial for optimal performance and longevity of your screen protector. Please follow these steps carefully.

Package Contents:

• BoxWave ClearTouch Crystal Privacy Screen Protector (2-Pack)
• Microfiber Cleaning Cloth
• Application Card (if included)

Image: Contents of the BoxWave ClearTouch Crystal Privacy 2-pack, showing two screen protectors and a microfiber cleaning cloth.

Installation Steps:

1. Prepare Your Workspace: Ensure you are in a clean, dust-free environment. Wash your hands thoroughly to avoid transferring oils or dirt to the screen.
2. Clean the Device Screen: Use the included microfiber cleaning cloth to thoroughly clean the screen of your Autophix JSC 2100. Remove all dust, smudges, and fingerprints. For stubborn marks, a screen cleaning solution (not included) can be used sparingly, followed by drying with the microfiber cloth.
3. Align the Screen Protector: Carefully peel back a small portion of the protective film from one end of the screen protector (usually marked as "Step 1" or "Back"). Align the exposed edge of the screen protector with the corresponding edge of your device's screen. Ensure all cutouts (if any) for sensors or cameras are correctly positioned.
4. Apply the Screen Protector: Once aligned, slowly and steadily peel off the rest of the protective film while simultaneously laying the screen protector onto the device screen. Use an application card (if provided) or a soft, flat object to gently press down and smooth out any air bubbles as you go. Work from one end to the other.
5. Remove Air Bubbles: If air bubbles remain, gently push them towards the nearest edge using the microfiber cloth or application card. Small bubbles may disappear on their own within 24-48 hours.
6. Final Cleaning: Once the screen protector is fully applied, use the microfiber cloth to gently wipe down the surface.

Important Note: The adhesive is designed to cling automatically. Avoid touching the adhesive side of the screen protector during installation.

Operating and Usage

The BoxWave ClearTouch Crystal Privacy Screen Protector enhances your device's functionality by providing both privacy and screen protection.

Privacy Feature:

The privacy filter works by limiting the viewing angle of your screen. When you look at your Autophix JSC 2100 screen directly, you will experience full clarity and brightness. However, individuals attempting to view your screen from side angles (typically beyond 25-30 degrees from the center) will see a darkened or obscured display, protecting your sensitive information from prying eyes.

Image: Diagram illustrating the anti-spy privacy protection, showing a clear view when looking directly at the screen and an obscured view from 30-45 degree side angles.

Clarity and Touch Sensitivity:

The ClearTouch Crystal Privacy film is designed to maintain 99% visual transparency when viewed head-on, preserving the original color brilliance and clarity of your device's display. It also ensures that touch screen responsiveness remains unaffected, allowing for precise and accurate interaction with your Autophix JSC 2100.

Image: A visual representation of the screen protector's high definition clarity, showing a vibrant image through the film.

Maintenance

To ensure the longevity and optimal performance of your BoxWave ClearTouch Crystal Privacy Screen Protector, follow these simple maintenance guidelines.

Cleaning the Screen Protector:

• Use a clean, soft, lint-free microfiber cloth (like the one provided) to gently wipe the surface of the screen protector.
• For smudges or fingerprints, lightly dampen the microfiber cloth with water or a screen-safe cleaning solution. Avoid harsh chemicals, alcohol, or abrasive materials, as these can damage the film.
• Wipe in one direction to avoid streaks.

Protection Against Damage:

While the screen protector offers significant resistance to scratches and scrapes, it is not indestructible. Avoid placing your device with sharp objects (keys, coins) in the same pocket or bag. The flexible film material is designed to absorb impacts and resist damage effectively.

Image: Illustration demonstrating the scratch-resistant properties of the screen protector, showing a knife and key not damaging the surface.

Troubleshooting

Here are solutions to common issues you might encounter during or after installation.

• Air Bubbles:
  • Small Bubbles: Many small bubbles will dissipate naturally within 24-48 hours as the adhesive fully cures.
  • Large Bubbles: Gently lift the nearest edge of the screen protector and reapply, pushing the bubble out with the application card or microfiber cloth. Ensure no dust particles are trapped underneath.
• Dust Particles Underneath:
  • Dust is the most common cause of persistent bubbles. Carefully lift the nearest edge of the screen protector. Use a piece of sticky tape to gently dab and lift the dust particle from both the screen and the adhesive side of the protector. Reapply slowly.
• Misalignment:
  • If the screen protector is significantly misaligned, carefully peel it off entirely. Clean both the device screen and the screen protector (if it's still clean enough) and attempt reinstallation. The "reusability" feature allows for this.
• Reduced Touch Sensitivity:
  • This is rare with ClearTouch Crystal Privacy films. Ensure the screen protector is fully adhered without large air gaps. If the issue persists, check your device's settings for touch sensitivity adjustments.

Specifications

Warranty and Support

For information regarding product warranty, returns, or technical support, please refer to the official BoxWave website or contact their customer service directly. Contact details are typically available on the product packaging or the manufacturer's website.

BoxWave Corporation
www.boxwave.com