Generic 10g GA3 Water Soluble Gibberellic Acid (ADT2121)

1. Introduction

This manual provides essential information for the safe and effective use of Generic 10g GA3 Water Soluble Gibberellic Acid, model ADT2121. Gibberellic acid (GA3) is a naturally occurring plant growth hormone derived from Gibberellic Seeds. It is widely utilized in gardening and agriculture to stimulate plant growth, promote flowering, fruiting, and seed germination, and ultimately increase crop yields. Our product contains 10 grams of pure Gibberellic Acid, designed for easy dissolution in water or other suitable solvents, making it compatible with a broad range of plants including vegetables, fruits, flowers, and herbs.

Image 1.1: Generic 10g GA3 Water Soluble Gibberellic Acid product packaging. This image displays the primary packaging of the 10-gram Gibberellic Acid powder, typically a sealed pouch or container.

2. Safety Information

Please read all safety instructions carefully before handling or using this product.

• Always dissolve the product in water before use.
• Avoid direct contact with skin and eyes. In case of accidental contact, rinse thoroughly with water for several minutes. If irritation persists, seek medical attention.
• Keep out of reach of children and pets.
• Do not ingest. If swallowed, seek immediate medical advice and show this container or label.
• Store in a cool, dry place, away from direct sunlight, heat sources, and open flames. Ensure the container is tightly sealed when not in use.
• Use appropriate personal protective equipment (PPE) such as gloves and eye protection when handling.

3. What's in the Box

Your package should contain the following items:

• 10g GA3 Water Soluble Gibberellic Acid powder
• 150mg measuring spoon
• Instructions (this manual)

4. Setup and Preparation

Before application, the Gibberellic Acid powder must be properly dissolved to create a solution suitable for plant treatment.

1. Gather Materials: You will need the GA3 powder, the provided 150mg measuring spoon, a clean container for mixing, and distilled or deionized water.
2. Measure GA3: Using the provided 150mg measuring spoon, carefully measure the desired amount of GA3 powder. For a standard solution, dissolve 150mg of GA3 in 1 liter of water. Adjust concentration based on specific plant needs and desired effects.
3. Dissolve in Water: Add the measured GA3 powder to the liter of water. Stir thoroughly until the powder is completely dissolved. GA3 is water-soluble and should dissolve quickly.
4. Prepare for Application: Once dissolved, the solution is ready for application. Transfer it to a spray bottle for foliar application or a watering can for soil drenching.

Image 4.1: Generic 10g GA3 Water Soluble Gibberellic Acid powder being measured. This image illustrates the powder being measured, likely with the included spoon, before dissolution.

5. Operating Instructions (Application)

Gibberellic acid can be applied to plants using various methods, depending on the desired outcome and plant type.

5.1. Application Methods

• Foliar Spraying: This is the most common method. Spray the GA3 solution directly onto the leaves of the plant until they are thoroughly wetted, but not to the point of runoff. Ensure even coverage.
• Soil Drenching: For root absorption, pour the GA3 solution around the base of the plant, allowing it to soak into the soil.
• Root Injection: Less common for home use, this method involves injecting the solution directly into the root zone for targeted delivery.

5.2. General Usage Guidelines

• GA3 works by stimulating the production of auxins, which are plant hormones that promote cell division and growth.
• It is often used to increase the yield and quality of crops.
• GA3 can also be used to delay the onset of flowering in some plants, which can be beneficial for certain crops or cultivation strategies.
• Always test on a small area or a single plant first to observe effects before widespread application, especially when experimenting with concentrations.
• Apply during cooler parts of the day (early morning or late evening) to minimize evaporation and maximize absorption.

Image 5.1: Example Product Labels for Gibberellic Acid. These images show illustrative labels for Gibberellic Acid products, indicating different concentrations (40% and 90%). Please note that the specific product covered by this manual is 10g of pure Gibberellic Acid, and these labels serve as general examples of GA3 product information.

6. Maintenance and Storage

Proper storage ensures the longevity and effectiveness of your Gibberellic Acid product.

• Powder Storage: Keep the GA3 powder sealed in its original container in a cool, dry place, away from direct sunlight, heat sources, and open flames. Room temperature storage is generally acceptable, but some users prefer cooler temperatures (2-8°C) for extended shelf life. Always ensure it is kept dry, possibly with a desiccant.
• Solution Storage: Once dissolved, GA3 solutions are less stable than the powder. It is recommended to prepare fresh solutions for each application. If storing a solution, keep it refrigerated and use within a few days.
• Container Care: After use, ensure all measuring tools and containers are thoroughly cleaned with water.

7. Troubleshooting

While Gibberellic Acid is generally effective, issues can sometimes arise. Here are some common troubleshooting tips:

• No Visible Effect:
  • Check Concentration: Ensure the GA3 solution was prepared at the correct concentration. Too low a concentration may yield no results.
  • Application Method: Verify that the application method (foliar spray, soil drench) was appropriate for the plant and desired effect.
  • Environmental Factors: Plant response can be influenced by light, temperature, and nutrient availability. Ensure optimal growing conditions.
  • Plant Type: Not all plants respond equally to GA3. Research the specific plant's known response.
• Negative Effects (e.g., excessive stem elongation, weak growth):
  • Over-concentration: This is the most common cause. Reduce the concentration of your GA3 solution for future applications.
  • Frequency of Application: Excessive or too frequent application can lead to undesirable results. Adhere to recommended application schedules.
• Poor Dissolution:
  • Water Quality: Use distilled or deionized water for best results. Hard water or water with impurities may affect dissolution.
  • Stirring: Ensure thorough and prolonged stirring until the powder is fully dissolved.

8. Specifications

9. Warranty and Support

Information regarding specific warranty terms or direct customer support for the Generic 10g GA3 Water Soluble Gibberellic Acid (ADT2121) is not available in the provided product data. For any inquiries or support, please refer to the retailer or point of purchase.