1. Introduction
Thank you for choosing the LIGHTJXDS Cordless Table Lamp. This portable LED lamp is designed for versatile use, offering adjustable brightness and a modern aesthetic. Its built-in rechargeable battery allows for flexible placement both indoors and outdoors. Please read this manual thoroughly to ensure proper use and longevity of your product.
Image 1: Two LIGHTJXDS Cordless Table Lamps.
2. Product Overview
Familiarize yourself with the components of your LIGHTJXDS Cordless Table Lamp.
Image 2: Key features and dimensions of the lamp.
- Lamp Head: Houses the LED light source.
- Lamp Body: The main aluminum structure.
- Base: Provides stability and contains the battery, switch, and charging port.
- Switch Button: Located on the base for power and brightness control.
- Charging Port: Located on the base for recharging the internal battery.
- Non-slip Mat: On the underside of the base for stability and surface protection.
3. Setup
3.1 Initial Charging
- Before first use, fully charge the lamp. Locate the charging port on the base of the lamp.
- Connect the provided charging cable to the lamp's charging port and a suitable USB power adapter (not included).
- The charging indicator (if present) will show the charging status. A full charge typically takes 4 to 4.5 hours.
- Once fully charged, disconnect the charging cable.
3.2 Placement
Place the lamp on a stable, flat surface. The non-slip mat on the base helps secure its position. Ensure the lamp is not exposed to extreme temperatures or direct water immersion, despite its waterproof rating, to prolong its lifespan.
4. Operating Instructions
4.1 Power On/Off and Brightness Adjustment
The lamp is controlled by a touch-sensitive switch located on the base.
- To Power On: Lightly touch the switch button on the base. The lamp will illuminate at its last used brightness setting.
- To Adjust Brightness: While the lamp is on, touch the switch button repeatedly to cycle through the available brightness options. The lamp offers multiple dimmable settings.
- To Power Off: Continue touching the switch button until the lamp turns off, or hold the button for a few seconds.
4.2 Light Temperature Options
The lamp offers two warm brightness options: 2900K and 3100K. These settings are integrated into the brightness cycle, allowing you to select the desired ambiance by cycling through the touch switch.
Video 1: Demonstration of LIGHTJXDS Cordless Table Lamps in various settings and showing touch control functionality.
5. Maintenance
5.1 Cleaning
- Ensure the lamp is turned off and disconnected from the charger before cleaning.
- Wipe the lamp with a soft, dry cloth. For stubborn marks, a slightly damp cloth can be used, followed by immediate drying.
- Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
5.2 Battery Care
- To maximize battery life, avoid completely draining the battery frequently.
- If storing the lamp for an extended period, charge it to approximately 50% every 3-6 months.
- Do not expose the battery to extreme heat or cold.
6. Troubleshooting
6.1 Lamp Not Turning On
- Ensure the lamp is charged. Connect it to a power source and allow it to charge for at least 30 minutes before attempting to turn it on again.
- Verify that the touch switch is being pressed correctly. A light, firm touch is usually sufficient.
6.2 Lamp Not Charging
- Check the charging cable for any damage. Try using a different USB cable if available.
- Ensure the USB power adapter is functioning correctly. Try plugging another device into the adapter to confirm.
- Verify that the charging cable is securely connected to both the lamp and the power adapter.
6.3 Inconsistent Brightness or Flickering
- The battery might be low. Recharge the lamp fully.
- Ensure the lamp is not in an environment with extreme temperature fluctuations.
7. Specifications
| Feature | Specification |
|---|---|
| Brand | LIGHTJXDS |
| Model Name | DJ-BAI (Item model number: DJ-SZZ-BAI) |
| Product Dimensions | 4"D x 4"W x 13.4"H |
| Item Weight | 2.1 Pounds |
| Material | Aluminum (Base Material: Metal) |
| Finish Type | Painted |
| Light Source Type | LED |
| Wattage | 3 Watts |
| Voltage | 5 Volts (DC) |
| Power Source | Battery Powered |
| Battery Capacity | 6000 mAh (1 Lithium Polymer battery included) |
| Charge Time | 4 - 4.5 hours |
| Lighting Time | 15 to 40 hours (depending on brightness) |
| Special Feature | Cordless, Dimmable |
| Control Method | Touch |
| Color Temperature Options | 2900K, 3100K (Warm) |
| LED Lifespan | 50,000 hours |
| Water Resistance Level | Waterproof |
| Indoor/Outdoor Usage | Indoor, Outdoor |
8. Warranty and Support
LIGHTJXDS is committed to providing quality products and customer satisfaction. Your Cordless Table Lamp comes with a lifetime service guarantee.
8.1 Lifetime Service
If you encounter any issues with your product, please contact us directly via email for assistance, including refund or exchange requests. We aim to respond to all inquiries within 24 hours and resolve any problems as quickly as possible.
8.2 Contact Information
For support, please refer to the contact details provided with your purchase or visit the official LIGHTJXDS store on Amazon.