YIIFELL 6PCS

YIIFELL 6-Pack EVA Foam Door Finger Pinch Guard Instruction Manual

Model: 6PCS

1. Product Overview

The YIIFELL 6-Pack EVA Foam Door Finger Pinch Guard is designed to enhance safety in homes with children and pets. These soft, C-shaped foam stoppers prevent doors from fully closing, thereby protecting fingers from accidental pinching, reducing the risk of door slamming, and preventing individuals or pets from being inadvertently locked in or out of rooms.

Six white C-shaped foam door finger pinch guards next to a door with one installed.

Image 1.1: YIIFELL 6-Pack EVA Foam Door Finger Pinch Guards. These guards are designed to prevent door-related accidents.

Key Features:

  • Finger Protection: Prevents fingers from being caught in closing doors.
  • Anti-Slam Function: Cushions door impact, reducing noise and potential damage from slamming.
  • Accidental Lock-Out Prevention: Keeps doors slightly ajar, preventing children or pets from being locked inside or outside rooms.
  • High-Quality Material: Made from soft, non-toxic, environmentally friendly EVA foam.
  • Durable Design: Resilient material resists deformation for long-lasting use.
  • Easy Installation: Simple to place on the side or top edge of most doors.
  • Furniture Friendly: Protects doors and frames from collision damage.

2. Safety Information

Please read and understand all safety information before using this product. Failure to follow these instructions may result in injury or damage.

  • This product is intended to help prevent accidents but is not a substitute for adult supervision. Always supervise children and pets.
  • Ensure the door pinch guard is securely placed and creates an adequate gap (approximately 1.5 inches) to prevent fingers from being caught.
  • Periodically check the guard for wear and tear. Replace immediately if damaged.
  • Keep guards out of reach of infants and young children when not in use to prevent choking hazards.
  • Do not modify the product in any way. Use only as intended.
Diagram showing how the door pinch guard prevents finger injuries, door slamming, and accidental lock-outs.

Image 2.1: The door guard effectively prevents injuries, slamming, and accidental lock-outs.

3. Product Components

Each package contains the following items:

  • 6 x YIIFELL EVA Foam Door Finger Pinch Guards (White)

4. Installation Instructions

Installing the YIIFELL Door Finger Pinch Guard is quick and easy, requiring no tools or adhesives.

  1. Identify Placement: Determine the best location on the door to prevent it from closing completely. This is typically on the side edge of the door, high enough to be out of reach of small children, or on the top edge.
  2. Open Door: Ensure the door is open to your desired position.
  3. Position Guard: Gently slide the C-shaped foam guard onto the edge of the door.
  4. Secure Placement: Push the guard firmly onto the door edge until it fits snugly. Ensure it creates a gap of approximately 1.5 inches between the door and the frame when the door is pushed towards closing.
  5. Test Functionality: Gently push the door to verify that the guard effectively prevents it from closing fully and protects against pinching or slamming.
A white C-shaped foam door guard installed on the side of a door, creating a 1.5-inch gap.

Image 4.1: Proper installation of the door guard, showing it fits snugly and creates a 1.5-inch gap.

Before and after comparison showing a hand being pinched by a closing door (before) and the door guard preventing the door from closing fully (after).

Image 4.2: Visual demonstration of the door guard preventing finger injuries.

5. Usage

Once installed, the YIIFELL Door Finger Pinch Guard operates passively to maintain a safe gap in the door. No further action is required for its primary function.

  • The guard will keep the door from fully closing, preventing accidental finger pinching.
  • It will absorb impact if the door is pushed or swung, reducing slamming noise and potential damage.
  • For rooms where you want to allow pets free access without the risk of them being locked in or out, place the guard on the door.
  • For temporary removal, simply slide the guard off the door edge. Store in a safe place away from small children.
A golden retriever sitting by an open door with a door guard installed, illustrating pet safety.

Image 5.1: The door guard helps prevent pets from being locked out or in.

Four panels showing wide application: a cat peeking through a door, a guard on a cabinet door, a baby near a drawer with a guard, and a child peeking through a door with a guard.

Image 5.2: The guards can be used on various doors, cabinets, and drawers for wide-ranging protection.

6. Care and Maintenance

To ensure the longevity and effectiveness of your YIIFELL Door Finger Pinch Guards, follow these simple care instructions:

  • Cleaning: Wipe the guards with a damp cloth and mild soap if they become dirty. Avoid harsh chemicals or abrasive cleaners.
  • Inspection: Regularly inspect the foam for any signs of damage, tears, or excessive compression.
  • Replacement: If a guard shows significant wear, damage, or no longer maintains the required gap, replace it with a new one to ensure continued safety.
  • Storage: When not in use, store the guards in a cool, dry place away from direct sunlight and out of reach of children.

7. Troubleshooting

If you encounter any issues with your door finger pinch guards, refer to the following common solutions:

ProblemPossible CauseSolution
Guard slips off the door easily.
  • Door thickness is too thin for the guard.
  • Guard is worn or stretched.
  • Incorrect placement.
  • Ensure the guard is placed on a door with appropriate thickness for a snug fit.
  • Replace the guard if it appears worn or stretched.
  • Reposition the guard higher on the door or on the top edge for a tighter grip.
Door still closes too much or slams.
  • Guard is not creating sufficient gap.
  • Guard is damaged or compressed.
  • Ensure the guard is fully pushed onto the door edge to maximize the gap.
  • Replace the guard if it is compressed or damaged and no longer provides adequate cushioning.
Guard is difficult to install.
  • Door thickness is too thick for the guard.
  • This product is designed for standard door thicknesses. If your door is unusually thick, the guard may not fit. Do not force it, as this can damage the guard or the door.

8. Product Specifications

Diagram showing the dimensions of a single door pinch guard: 9.3 cm / 3.66 inches length, 3.5 cm / 1.38 inches width, and 1.5 cm / 0.59 inches gap thickness.

Image 8.1: Dimensions of the YIIFELL Door Finger Pinch Guard.

FeatureDetail
BrandYIIFELL
Model Number6PCS
MaterialEVA Foam
ColorWhite
Mounting TypeDoor Mount (Pinch)
Number of Pieces6
Item Weight (per pack)1.41 ounces
Package Dimensions11.22 x 7.13 x 0.83 inches
Clearance CreatedApprox. 1.5 inches (3.5 cm)

9. Warranty and Customer Support

YIIFELL is committed to providing high-quality products. While specific warranty details are not provided in this manual, please retain your proof of purchase for any potential warranty claims.

For customer support, questions, or concerns regarding your YIIFELL Door Finger Pinch Guards, please contact the seller directly through the platform where the purchase was made. You may also visit the official YIIFELL store on Amazon for more information:

Visit the YIIFELL Store on Amazon

© 2025 YIIFELL. All rights reserved.

This manual is for informational purposes only. Product specifications are subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.