Blueshaweu HASAKEI S53

Blueshaweu Magnetic USB Charging Cable User Manual

For NAIXUES S53 / HASAKEI S53 Smartwatches

Introduction

Thank you for choosing the Blueshaweu Magnetic USB Charging Cable. This manual provides essential information for the safe and efficient use of your charging cable. Please read these instructions carefully before use and retain them for future reference.

Compatibility

This charging cable is specifically designed for the following smartwatch models:

  • NAIXUES S53 1.39-inch Smart Watch
  • HASAKEI S53 1.39-inch Smart Watch

Note: This cable is not compatible with other smartwatch models. Please verify your watch model before attempting to charge. The smartwatch itself is not included with this charging cable.

Setup

To begin charging your smartwatch, follow these steps:

  1. Connect the USB-A End: Insert the standard USB-A connector of the charging cable into a compatible power source. This can be a USB wall adapter (5V/1A recommended), a power bank, a laptop, or a computer's USB port.
    2. USB-A end connected to various power sources like a laptop, power bank, and wall charger.

    Image: The USB-A end of the charging cable can be connected to a laptop, power bank, or wall charger for power.

  2. Position the Magnetic Connector: Align the magnetic charging pins of the cable with the charging contacts on the back of your smartwatch. The strong magnetic design will help the cable snap into place securely.
    3. Diagram showing correct and incorrect magnetic charging connection for a smartwatch.

    Image: Ensure the magnetic pins align correctly with the smartwatch's charging contacts. If the magnets repel, reverse the cable's orientation.

  3. Verify Connection: Once connected, your smartwatch should indicate that it is charging. If the magnets repel or the watch does not show a charging indicator, gently detach the cable and try connecting it in the opposite orientation.

Operating Instructions

The Blueshaweu Magnetic USB Charging Cable is designed for simple and safe operation.

  • Charging Process: Once properly connected, the cable will automatically begin charging your smartwatch. The watch display will typically show a charging icon or battery percentage.
  • Fast Charging: The cable supports fast charging, allowing your smartwatch to reach a full charge in approximately 40 minutes.
  • Safety Features: The charging cable incorporates multiple protection mechanisms, including over-current protection, over-voltage protection, over-charging protection, and high-temperature protection, to ensure safe charging of your device.
    • Icons representing over-current, over-voltage, over-charging, and high-temperature protection features.

    Image: The charging cable includes multiple safety protections for your smartwatch.

Maintenance

Proper care will extend the life of your charging cable.

  • Cleaning: Gently wipe the cable and magnetic contacts with a dry, soft cloth to remove dust or debris. Do not use liquid cleaners.
  • Storage: The flexible PVC cable is designed to be easily rolled for convenient storage. Store the cable in a cool, dry place away from direct sunlight and extreme temperatures.
  • Handling: Avoid sharp bends or excessive pulling on the cable, especially near the connectors, to prevent internal damage.
    • Image showing the charging cable undergoing a bending test, highlighting its durability.

    Image: The cable is designed for durability, tested for over 20,000 bends.

Troubleshooting

ProblemPossible CauseSolution
Smartwatch is not charging.
  • Incorrect magnetic connection.
  • Power source issue.
  • Cable damage.
  • Incompatible smartwatch model.
  • Ensure the magnetic pins are correctly aligned and attracted to the watch contacts. If they repel, reverse the cable's orientation.
  • Try a different USB port or wall adapter.
  • Inspect the cable for visible damage. If damaged, discontinue use.
  • Confirm your smartwatch is a NAIXUES S53 or HASAKEI S53 model.
Magnetic connection feels weak or repels.Incorrect polarity alignment.Detach the cable and re-attach it, rotating the magnetic connector 180 degrees if necessary. The magnets should attract firmly.

Specifications

BrandBlueshaweu
Model CompatibilityNAIXUES S53, HASAKEI S53 (1.39-inch Smart Watch)
Cable TypeUSB Type A to Magnetic Pogo Pin
Cable Length1 meter (approximately 3.3 feet)
MaterialDurable PVC and ABS
Special FeaturesMagnetic connection, Fast Charging, Over-current protection, Over-voltage protection, Over-charging protection, High-temperature protection.
Number of Pins9
Package Dimensions10 x 5 x 1 cm
Weight50 grams
Close-up of the charging cable showing pure copper probes, ABS+PC durable material, and flexible PVC cable with 1 meter length indicated.

Image: Key features of the cable construction, including pure copper probes and durable materials.

Warranty Information

Specific warranty details for this product are not provided in the available information. Please refer to the retailer's return policy or contact the seller directly for warranty inquiries.

Customer Support

For any questions, concerns, or technical assistance regarding your Blueshaweu Magnetic USB Charging Cable, please contact the retailer from whom you purchased the product. They will be able to provide the most accurate and timely support.