Introduction
The BLACK+DECKER Easy Store Pro Foldable Steamer is designed for efficient and convenient garment care. Its compact, foldable design makes it ideal for both home use and travel. Featuring a quick 45-second heat-up time and powerful steam performance, it effectively removes wrinkles from clothes, drapes, and upholstery. This manual provides essential information for safe and effective operation, maintenance, and troubleshooting.
Important Safety Information
Please read and understand all safety instructions before using this appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always use distilled or demineralized water to prevent mineral buildup and extend the life of your steamer.
- Do not immerse the steamer in water or other liquids.
- Unplug the appliance from the power outlet when not in use and before cleaning.
- Allow the steamer to cool completely before storing.
- Keep the steamer out of reach of children and pets.
- Do not direct steam at people, pets, or directly at electrical appliances.
- Use caution when handling hot steam and hot surfaces.
- Ensure the power cord is not damaged or tangled during use.
Setup Guide
Unpacking
- Carefully remove all components from the packaging.
- Inspect the steamer for any signs of damage. Do not use if damaged.
- Ensure all accessories, including the lint remover attachment, are present.
Filling the Water Tank
The steamer features an easy-fill water tank with a 150ml capacity.
- Ensure the steamer is unplugged from the power outlet.
- Locate the water tank cap on the top of the base.
- Pull the cap to the side to open the water tank.
- Carefully fill the tank with distilled water up to the MAX fill line. Do not overfill.
- Close the water tank cap securely.
A close-up view of the steamer's base, highlighting the easy-fill water tank with a clear purple reservoir.
An annotated image of the steamer pointing out key features: 150ml water tank, extra-long 10ft power cord, and compact & lightweight design.
Product Overview Video
This video provides a comprehensive overview of the BLACK+DECKER Easy Store Pro Steamer, demonstrating its features, setup, and basic operation.
Operating Instructions
Powering On
- Plug the steamer's 10-foot power cord into a standard electrical outlet.
- Press the power button located on the back of the steamer. The indicator light will pulsate red during the 45-second heat-up period.
- Once the light turns solid red, the steamer is ready for use.
Steaming Garments
The steamer offers dual steam modes for versatile wrinkle removal.
- Hang the garment on a hanger or hold the fabric taut.
- Hold the steamer upright, ensuring the steam plate is facing the fabric.
- For a powerful burst of steam (18g/min), press and hold the steam trigger. For continuous steam (up to 7 minutes), slide the steam lock switch.
- Move the steamer slowly over the fabric, from top to bottom, allowing the steam to penetrate and relax the fibers.
- For stubborn creases, use the detachable lint brush attachment to gently brush the fabric while steaming.
- After steaming, allow the garment to cool and dry before wearing or storing.
A woman is steaming a pillow on a couch, illustrating the continuous steam output of the device.
A woman is shown using the steamer on drapes, demonstrating its dual steam modes for quick burst or continuous steam.
Care and Maintenance
Cleaning
- Always unplug the steamer and allow it to cool completely before cleaning.
- Empty any remaining water from the tank after each use.
- Wipe the exterior of the steamer with a soft, damp cloth. Do not use abrasive cleaners.
- For mineral buildup on the steam plate, wipe with a cloth dampened with a vinegar solution, then wipe with a clean, damp cloth.
Storage
The Easy Store Pro Steamer is designed for compact storage.
- Ensure the steamer is completely cool and dry before storing.
- Fold the steamer head down into its compact position.
- Wrap the extra-long power cord neatly around the base and secure it with the integrated clip.
- Store the steamer in a cool, dry place.
The steamer is shown folded and placed inside a black suitcase, demonstrating its compact and travel-ready design.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No steam or low steam output. | Water tank is empty or low. Steamer not heated. | Refill water tank. Allow 45 seconds for heat-up until light is solid red. |
| Water spitting from steam plate. | Using tap water (mineral buildup). Overfilling tank. | Use distilled water only. Do not overfill the tank. |
| Wrinkles not completely removed. | Steaming too quickly. Fabric type. | Move steamer slower over fabric. Use lint brush attachment for stubborn wrinkles. Some fabrics may require additional passes. |
| Steamer not turning on. | Not plugged in correctly. Power outlet issue. | Ensure steamer is securely plugged into a working outlet. Check circuit breaker. |
Product Specifications
| Feature | Detail |
|---|---|
| Brand | BLACK+DECKER |
| Model | GS0311-0PD |
| Color | Violet |
| Wattage | 1200 watts |
| Voltage | 120 Volts |
| Heat Time | 45 seconds |
| Water Tank Capacity | 150 Milliliters |
| Continuous Steam Time | Up to 7 minutes |
| Steam Burst Output | 18g/min |
| Power Cord Length | 10 feet |
| Included Components | Lint Remover Attachment |
| Product Dimensions | 5.24 x 4.21 x 8.15 inches |
| Item Weight | 2.16 pounds |
| UPC | 050875003453 |
Warranty and Support
For warranty information and customer support, please refer to the documentation included with your product or visit the official BLACK+DECKER website. Keep your purchase receipt as proof of purchase for any warranty claims.
For further assistance, you may contact BLACK+DECKER customer service directly.
