Introduction
Thank you for choosing Govee RGBIC Neon Rope Light Mounting Brackets. These brackets are designed to securely hold your Govee neon rope lights, allowing for creative and stable installations on various smooth surfaces. This manual provides detailed instructions for installation, usage, and maintenance to ensure optimal performance and longevity of your product.
Product Overview
The Govee mounting bracket set includes 20 durable plastic clips, each designed for easy installation with strong adhesive backing. These clips are specifically compatible with Govee neon rope light models H61D3 and H61D5.
What's Included
- 20 x Plastic Mounting Brackets (Each bracket size: 1.18 inch x 0.47 inch x 0.45 inch)
Compatibility
These mounting brackets are compatible with Govee neon rope light models:
- H61D3
- H61D5
Note: These brackets are not compatible with models H61A0, H61A1, H61A2, H61A5.
Image: A single Govee mounting bracket showing its dimensions (30mm length, 12mm height, 11.4mm depth). The bracket is white with the Govee logo.
Installation Guide
Follow these steps to properly install your Govee neon rope light using the mounting brackets:
- Clean the Wall: Ensure the surface where you plan to install the brackets is clean and dry. Use a dry cloth to wipe away any dust or debris. A clean surface ensures optimal adhesive performance.
- Confirm Position and Apply: Carefully plan the layout of your neon rope light. Once the desired position for a bracket is determined, peel off the protective film from the strong adhesive backing. Press the bracket firmly onto the surface for at least 3 seconds to ensure a secure bond. Repeat for all brackets.
- Secure the Neon Light: Gently press the Govee neon rope light into the installed wall clips. The clips are designed to hold the rope light snugly.
- Connect to Power: Once all brackets and the neon rope light are securely in place, connect the light to its power source.
Image: A visual guide demonstrating the four installation steps: 1. Cleaning the wall with a dry cloth. 2. Confirming clip position and pressing for 3 seconds. 3. Securing the neon light into the wall clips. 4. Connecting the light to power.
Product Features
These mounting brackets are designed to complement the flexibility and aesthetic of Govee neon rope lights, enabling diverse creative installations.
- Durable Construction: Made from high-quality plastic, these clips are corrosion-resistant and dust-resistant, ensuring long-term use.
- Smooth Finish: The coated surface and round edges are smooth, preventing damage to the neon rope light or injury during handling.
- Enhanced Design: The upgraded bend clips allow for easier shaping and securing of the neon rope light, facilitating intricate designs.
Image: A Govee neon rope light is shown installed in a wavy pattern using multiple bend clips. An illustration highlights the flexible design of the bend clips, indicating their ability to adapt to various shapes.
Maintenance
The Govee mounting brackets require minimal maintenance due to their durable plastic construction. To ensure their longevity and appearance:
- Cleaning: If dust accumulates, gently wipe the brackets with a dry, soft cloth. Avoid using abrasive cleaners or solvents, which may damage the plastic or adhesive.
- Inspection: Periodically check the brackets to ensure they remain securely attached to the surface and continue to hold the neon rope light firmly.
Troubleshooting
If you encounter issues with the mounting brackets, consider the following:
- Brackets not sticking: Ensure the installation surface was thoroughly cleaned and dry before application. Oily, dusty, or uneven surfaces can prevent proper adhesion. Re-clean the area and apply a new bracket if necessary, pressing firmly for the recommended duration.
- Neon light not fitting: Confirm that your Govee neon rope light model is H61D3 or H61D5. These brackets are not designed for other models.
- Brackets breaking: While durable, excessive force during installation or removal can cause damage. Handle with care.
Specifications
| Brand | Govee |
| Model Numbers | H61D3, H61D5 |
| Material | Plastic |
| Color | White |
| Item Weight | 0.05 kg (for the set) |
| Unit Count | 20 Count |
| Item Depth | 45 millimeters (approx. 1.77 inches) |
| Mounting Type | Wall Mount (Adhesive) |
| Finish Type | Polished |
| UPC | 810088348365, 381008834836 |
Customer Support
For further assistance, warranty information, or to report any issues, please visit the official Govee website or contact Govee customer support.
Official Govee Store: Govee Store on Amazon
