OROW S215 2.1 Multimedia Computer Speakers User Manual

Introduction

This manual provides instructions for the OROW S215 2.1 Multimedia Computer Speakers. This speaker system features a subwoofer and two satellite speakers, offering multiple connectivity options and customizable RGB lighting. Please read this manual thoroughly before use to ensure proper operation and to maximize your audio experience.

Safety Information

Please observe the following safety guidelines to prevent damage to the device or personal injury:

• Do not expose the speakers to water or excessive moisture.
• Do not place the speakers near heat sources or in direct sunlight.
• Ensure proper ventilation around the subwoofer to prevent overheating.
• Use only the specified power adapter (DC-5V USB power source).
• Keep out of reach of children.
• Do not attempt to disassemble or repair the unit yourself. Contact customer support for assistance.

Package Contents

Verify that all items are present in the package:

• 1 x OROW S215 Subwoofer
• 2 x Satellite Speakers
• 1 x 3.5mm Audio Cable (integrated)
• 1 x USB Power Cable (integrated)
• 1 x User Manual (this document)

Product Diagram and Controls

Familiarize yourself with the components and controls of your OROW S215 speaker system.

Image: OROW S215 Subwoofer and Satellite Speakers with highlighted controls. The front of the subwoofer features a large volume knob with integrated RGB lighting. The rear panel of the subwoofer includes the bass control knob, an ON/OFF switch, L/R output ports for satellite speakers, a USB port, and a DC-5V power input.

Subwoofer:

• Front Volume Knob: Rotate to adjust the overall volume.
• Rear Bass Knob: Adjusts the bass level.
• ON/OFF Switch: Powers the speaker system on or off.
• L/R Output Ports: Connect the satellite speakers here.
• USB Port: For USB drive playback.
• DC-5V Input: Connect the USB power cable here.

Satellite Speakers:

• Connect to the L/R output ports on the subwoofer.

Setup

Follow these steps to set up your OROW S215 speaker system:

1. Placement: Place the subwoofer on a stable surface, ideally on the floor or under your desk for optimal bass. Position the satellite speakers on either side of your monitor or listening area.
2. Connect Satellite Speakers: Connect the cables from the two satellite speakers to the 'L OUT' and 'R OUT' ports on the rear of the subwoofer.
3. Connect Audio Source:
   • 3.5mm AUX: Connect the integrated 3.5mm audio cable from the subwoofer to the audio output jack of your computer, laptop, smartphone, or other audio device.
   • USB Power: Connect the integrated USB power cable to a USB port on your computer or a 5V USB power adapter (not included).
4. Power On: Flip the ON/OFF switch on the rear of the subwoofer to the 'ON' position.
5. Adjust Volume: Rotate the front volume knob to a low setting before playing audio.

Operating Instructions

The OROW S215 speakers support multiple playback methods.

Image: Four panels illustrating different connection methods: Bluetooth, AUX, SD card, and USB. The Bluetooth panel shows a smartphone connecting wirelessly. The AUX panel shows a laptop connected via a 3.5mm cable. The SD card panel shows an SD card being inserted into a slot. The USB panel shows a USB drive being inserted into a port.

1. 3.5mm AUX Connection:

   Ensure the 3.5mm audio cable is connected from your device to the subwoofer. The speakers will automatically detect the AUX input.
2. USB Drive Playback:

   Insert a USB flash drive containing audio files into the USB port on the rear of the subwoofer. The speakers will automatically begin playing audio from the drive.

3. TF Card Playback:

   Insert a TF (Micro SD) card containing audio files into the TF card slot. The speakers will automatically begin playing audio from the card.

4. Bluetooth Connection:

   Turn on the speakers. The speakers will enter Bluetooth pairing mode (indicated by a flashing light, if applicable). On your device (smartphone, computer), search for Bluetooth devices and select 'OROW S215' to connect. Once paired, audio will stream wirelessly.
5. Volume Control:

   Use the large knob on the front of the subwoofer to adjust the master volume. You can also control volume from your connected device.

6. Bass Control:

   Use the 'BASS' knob on the rear of the subwoofer to fine-tune the bass output to your preference.

RGB Lighting Modes

The OROW S215 speakers feature dynamic RGB lighting with multiple modes.

Image: The OROW S215 speaker system displaying various RGB lighting modes: Flow, three single colors (purple, blue, white), and lights off. This illustrates the customization options for the speaker's lighting.

The speakers offer 5 different lighting modes. The lights can also react to the rhythm of the music. To cycle through the lighting modes or turn the lights off, use the dedicated light switch, which may be integrated with the bass knob or a separate button on the subwoofer.

Maintenance

Proper maintenance ensures the longevity of your speakers.

• Cleaning: Use a soft, dry cloth to wipe the speaker surfaces. Do not use liquid cleaners or abrasive materials.
• Storage: When not in use for extended periods, store the speakers in a cool, dry place away from direct sunlight.

Troubleshooting

If you encounter issues with your OROW S215 speakers, refer to the following common solutions.

Specifications

Detailed specifications for the OROW S215 Computer Speakers.

Warranty and Support

Warranty Information:

The OROW S215 Computer Speakers come with a limited warranty. Please refer to the warranty card included in your package for specific terms and conditions. Retain your proof of purchase for warranty claims.

Customer Support:

For technical assistance, troubleshooting, or warranty inquiries, please contact OROW customer support. Contact information can typically be found on the product packaging or the official OROW website.