Valspar Pro-Hide Gold Ultra Exterior Super One Coat Primer User Manual

Introduction

The Valspar Pro-Hide Gold Ultra Exterior Super One Coat Primer is a self-priming, 100% acrylic professional-quality exterior paint. It is engineered to resist fading and offers strong, durable adhesion. This product is suitable for low-temperature application down to 35°F, extending the painting season.

Image: Valspar Pro-Hide Gold Ultra Exterior Semi-Gloss White paint can.

Setup and Surface Preparation

Proper surface preparation is crucial for optimal adhesion and finish. Ensure the surface is clean, dry, and dull. Remove all loose paint, dirt, grease, and mildew. Glossy surfaces should be dulled by sanding.

• Cleaning: Wash surfaces with a suitable cleaner, rinse thoroughly, and allow to dry completely.
• Sanding: Lightly sand glossy surfaces to create a profile for better adhesion.
• Patching: Fill any cracks or holes with appropriate patching compound and sand smooth.
• Temperature: Apply when air and surface temperatures are between 35°F (1.7°C) and 90°F (32.2°C). Avoid application in direct sunlight or when rain is expected.
• Mixing: Stir the paint thoroughly before and during application to ensure uniform color and consistency.

Operating (Application)

This paint can be applied using a brush, roller, or airless sprayer. For best results, apply two coats.

Image: Visual guide for Valspar Pro-Hide Gold Ultra, showing dry time, recoat time, coverage, application methods (brush, roller, airless sprayer), and cleanup instructions.

Application Methods:

• Brush: Use a high-quality synthetic brush for smooth application, especially for trim and corners.
• Roller: Use a high-quality roller cover appropriate for the surface texture. For smooth surfaces, use a 3/8" nap; for semi-smooth, use 1/2" nap; for rough surfaces, use 3/4" nap.
• Airless Sprayer: For optimal results, use a 0.015" - 0.019" tip at 2000 PSI. Follow sprayer manufacturer's instructions for proper setup and operation.

Drying and Recoat Times:

• Dry Time: Dries to touch in approximately 1 hour.
• Recoat Time: Allow 2-4 hours before applying a second coat. Drying times may vary based on temperature, humidity, and film thickness.

Coverage:

One gallon typically covers approximately 400 square feet, depending on surface porosity and texture.

Maintenance and Cleanup

Proper cleanup and storage will ensure longevity of your tools and paint.

• Tool Cleanup: Clean brushes, rollers, and spray equipment immediately after use with warm, soapy water. Rinse thoroughly.
• Spills: Clean up spills immediately with a damp cloth and soapy water.
• Storage: Store unused paint in a tightly sealed container in a cool, dry place, away from direct sunlight and freezing temperatures.
• Disposal: Dispose of paint and paint-related waste according to local regulations. Do not pour down drains.

Troubleshooting

Specifications

Warranty and Support

Specific warranty details are not provided within this manual. For information regarding product warranty, technical support, or further assistance, please contact Valspar customer service directly or visit the official Valspar website.

Always refer to the product label for the most current safety and application instructions.