QANYEGN B0CWL9LW3T

QANYEGN Men's Electric Shaver User Manual

Model: B0CWL9LW3T

1. Product Overview

The QANYEGN Men's Electric Shaver is a versatile grooming tool designed for efficient and comfortable shaving of facial hair. It features a dual reciprocating foil system for a close shave and is powered by a rechargeable battery for cordless operation.

QANYEGN Men's Electric Shaver

Image 1.1: Front view of the QANYEGN Men's Electric Shaver.

2. Package Contents

Please check the package for the following items:

  • 1 x QANYEGN Electric Shaver
  • 1 x USB Charging Cable
  • 1 x Cleaning Brush
  • 1 x User Manual

3. Parts Identification

Familiarize yourself with the components of your electric shaver:

Electric Shaver Parts Identification

Image 3.1: Key components including the blade removal button, power switch, charging port, and charging indicator.

  • Shaver Head: Contains the reciprocating foils and cutters.
  • Power Switch: Turns the shaver on and off.
  • Charging Port: For connecting the USB charging cable.
  • Charging Indicator: Light that indicates charging status.
  • Blade Removal Button: Releases the shaver head for cleaning or replacement.

4. Charging the Shaver

Before first use, fully charge the shaver. A full charge takes approximately 5 hours and provides up to 45 minutes of cordless use.

  1. Ensure the shaver is turned off.
  2. Connect the USB charging cable to the shaver's charging port.
  3. Plug the other end of the USB cable into a compatible USB power adapter (not included) or a computer USB port.
  4. The charging indicator light will illuminate to show that the shaver is charging.
  5. Once fully charged, disconnect the charging cable.

Important: Do not operate the shaver while it is connected to the charging cable.

5. Operating the Shaver

This electric shaver is designed for dry shaving. It features precise cutting technology with a reciprocating single plate and a fine mesh design for a smooth and comfortable experience.

  1. Ensure your skin is clean and dry before shaving.
  2. Press the power switch to turn on the shaver.
  3. Hold the shaver at a right angle to your skin.
  4. Gently move the shaver against the direction of hair growth, using light pressure.
  5. Stretch your skin with your free hand to ensure hairs stand upright for a closer shave.
  6. After shaving, press the power switch to turn off the shaver.
Independent Floating Shaver Head

Image 5.1: The independent floating cutter head adapts to facial contours for a comfortable shave.

Full Mesh Veneer Knife Mesh Design

Image 5.2: The precision mesh design enhances shaving efficiency.

6. Maintenance and Cleaning

Important: This shaver is NOT washable. Do not rinse the shaver under water or immerse it in any liquid. Clean only with the provided brush.

6.1. Daily Cleaning

  1. Ensure the shaver is turned off and disconnected from any power source.
  2. Press the blade removal button to detach the shaver head.
  3. Use the provided cleaning brush to brush away any accumulated hair clippings from the shaver head and the shaver body.
  4. Reattach the shaver head by aligning it and pushing it firmly until it clicks into place.
Removable Cutter Head and Cutter Net

Image 6.1: The removable cutter head and net facilitate easy cleaning and replacement.

6.2. Disassembly and Installation of Shaver Head

To thoroughly clean or replace the shaver head, follow these steps:

Shaver Head Disassembly and Installation Steps

Image 6.2: Visual guide for detaching and reattaching the shaver head.

Disassembly Steps:

  1. Press and hold the round button located on the side of the shaver.
  2. While holding the button, grab both sides of the cutter head and pull it outwards to remove it.

Installation Steps:

  1. Hold both sides of the cutter head and align it with the shaver body.
  2. Push the cutter head hard downwards until it clicks firmly into position.

7. Troubleshooting

ProblemPossible CauseSolution
Shaver does not turn on.Battery is depleted.Charge the shaver for 5 hours.
Shaver pulls hair or shaves poorly.Cutter head is dirty or worn.Clean the shaver head thoroughly. If performance does not improve, consider replacing the shaver head.
Charging indicator does not light up.Charging cable or power source issue.Check the USB cable connection and try a different USB power source.

8. Specifications

  • Item Type: Electric Hair Clipper
  • Material: ABS
  • Power Source: Battery Powered
  • Charging Method: USB Charging
  • Charging Time: Approximately 5 hours
  • Use Time: Approximately 45 minutes
  • Cleaning Method: Not Washable (Dry cleaning only)
  • Product Dimensions: 7.87 x 5.12 x 2.76 inches
  • Item Weight: 0.25 Kilograms (8.82 ounces)

9. Safety Information

  • Keep the shaver dry. Do not use it in the shower or bath.
  • Do not immerse the shaver in water or any other liquid.
  • Keep out of reach of children.
  • Do not disassemble or attempt to repair the shaver yourself. Contact customer support for assistance.
  • Use only the provided USB charging cable.
  • Avoid using the shaver on irritated or damaged skin.

© 2024 QANYEGN. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.