Yoltckde 230W LED Follow Spot Light

Product Overview

The Yoltckde 230W LED Follow Spot Light is a professional performance lighting solution designed for various stage applications, including DJ parties, theaters, discos, and weddings. This high-intensity spotlight features a powerful 230W LED light source, multi-color capabilities, and comes with a height-adjustable tripod stand for versatile positioning. It supports both DMX and manual control modes, offering flexibility for both professional and amateur users.

Constructed from high-quality stainless steel, quartz, and aluminum, this spotlight is built for durability and long service life. Its efficient air-cooling system prevents overheating, ensuring stable performance during extended use.

Figure 1: The Yoltckde 230W LED Follow Spot Light mounted on its adjustable tripod stand.

Package Contents

Before beginning assembly, please verify that all components are present and undamaged. The package should contain the following items:

• 1 x 230W Stage Spotlight Unit
• 1 x Tripod Bracket
• 1 x Signal Cable
• 1 x Power Cable
• 1 x English Instruction Manual (this document)
• Necessary mounting hardware (screws, knobs, Allen wrench)

Figure 2: All components included in the product package, including the spotlight, tripod base, cables, and small parts.

Setup and Assembly

The Yoltckde 230W LED Follow Spot Light requires minimal assembly. Follow these steps to set up your unit:

1. Assemble the Tripod Stand: Unfold the legs of the tripod stand (Figure 3) and ensure they are fully extended and stable. Tighten any locking mechanisms to secure the legs in place.
2. Attach the Spotlight Unit: Secure the 230W Stage Spotlight unit to the top of the tripod bracket using the provided mounting hardware. Ensure the unit is firmly attached and balanced.
3. Adjust Height: Loosen the height adjustment knob on the tripod stand and extend the central pole to your desired height. The stand is adjustable from approximately 69.29 inches (176 cm) to 75.2 inches (191 cm). Tighten the knob securely once the desired height is achieved.
4. Connect Power: Insert the power cable into the "POWER INPUT" port on the rear of the spotlight unit and then plug the other end into a standard 110-240V AC power outlet.
5. Connect Signal Cable (Optional for DMX): If using DMX control, connect the signal cable to the DMX IN and DMX OUT ports on the unit and to your DMX controller.

Figure 3: The adjustable tripod stand, ready for spotlight attachment.

Figure 4: Detailed dimensions of the spotlight unit and the assembled stand, showing height and width measurements.

Operating Instructions

The Yoltckde 230W LED Follow Spot Light offers both manual and DMX control options.

Manual Control

For manual operation, use the knobs located on the rear panel of the spotlight unit (Figure 5).

• Power Switch: Flip the "ON/OFF" switch to the "ON" position to power on the unit.
• Colour Knob: Rotate the "COLOUR" knob to cycle through the available light colors: White, Yellow, Orange, Green, Blue, and Red.
• Aperture Knob: Adjust the "APERTURE" knob to control the beam size and focus. This allows for precise control over the light spot's diameter.
• Color Temperature Correction: The unit supports color temperature adjustments: 5600K (Normal), 6000K (High), and 3200K (Low). These settings are typically controlled via the DMX interface or internal manual settings not directly exposed by a knob. Refer to the DMX section for advanced control.
• Manual Strobe: The unit features a manual strobe function. Specific controls for this function may be integrated with the DMX system or require a specific sequence of manual adjustments.

Figure 5: The rear control panel showing the power switch, color knob, aperture knob, fuse, and power input.

Figure 6: A detailed view of the aperture adjustment mechanism, allowing control over the beam size.

DMX Control

The spotlight supports DMX control for integration into professional lighting setups. Connect a DMX controller to the DMX IN port. The unit uses a self-configured signal. Refer to your DMX controller's manual for specific channel assignments and programming instructions for controlling color, aperture, strobe, and color temperature correction via DMX.

Maintenance

Proper maintenance ensures the longevity and optimal performance of your Yoltckde 230W LED Follow Spot Light.

• Cleaning: Regularly clean the exterior of the unit with a soft, dry cloth. For the lens, use a specialized lens cleaning solution and a microfiber cloth to avoid scratches. Ensure the unit is powered off and unplugged before cleaning.
• Ventilation: Ensure that the ventilation holes on the unit are not obstructed. The high-intensity air cooling system requires clear airflow to prevent overheating.
• Storage: When not in use, store the spotlight in a cool, dry place, away from direct sunlight and excessive dust. It is recommended to store it in its original packaging or a protective case.
• Cable Inspection: Periodically inspect all cables (power and signal) for any signs of wear, fraying, or damage. Replace damaged cables immediately to prevent electrical hazards.

Troubleshooting

This section addresses common issues you might encounter with your follow spot light.

Specifications

Warranty and Support

This product is designed for durability and performance. While specific warranty details are not provided in this manual, standard consumer protection laws apply. For any issues or support inquiries, please contact the seller or manufacturer directly.

Please retain your proof of purchase for any warranty claims or service requests. The product typically includes a return policy of 30 days from the date of purchase.