Clearly Filtered No.1 Filtered Water Pitcher Instruction Manual

1. Introduction

Welcome to the Clearly Filtered No.1 Filtered Water Pitcher. This manual provides essential information for the proper setup, operation, and maintenance of your new water filtration system. The Clearly Filtered Water Pitcher is designed to provide clean, great-tasting water by significantly reducing a wide range of contaminants found in tap water.

Image: The Clearly Filtered pitcher on a kitchen counter, with a glass of filtered water, emphasizing clean water.

2. Product Components

Your Clearly Filtered No.1 Filtered Water Pitcher package includes the following items:

• Clearly Filtered Water Pitcher (1)
• Clearly Filtered Affinity® Filtration Technology Filter (1)
• Filter Priming Bag (1)

Image: An overhead view of the Clearly Filtered water pitcher, showing the clear pitcher body, white lid, and the filter unit installed inside the reservoir.

Key Design Features

• Attached Hinged Lid: For convenient refilling.
• Repositioned Comfort Handle: Designed for easier pouring and carrying.
• Spill-Resistant Water Dam: Prevents leaks and spills during use.
• 100% BPS/BPA-Free: Made from phthalate-free, medical-grade materials, free of estrogen and androgen activity.

Image: A diagram highlighting the key features and recent updates to the Clearly Filtered pitcher design, including the hinged lid, comfort handle, and spill-resistant dam.

3. Setup

3.1. Unpacking

Carefully remove all components from the packaging. Inspect each item for any signs of damage. If any components are damaged or missing, please contact customer support.

3.2. Filter Priming

Priming the filter is a critical step to ensure optimal performance and filter longevity. Follow these instructions carefully:

1. Unscrew the filter from the provided priming bag.
2. Fill the priming bag with cold tap water.
3. Screw the filter back onto the priming bag, ensuring a tight seal to prevent leaks.
4. Gently squeeze the priming bag until water begins to flow through the filter. Continue squeezing until approximately 1 cup (8 oz) of water has passed through. This process removes air from the filter media.
5. Discard the water that passed through during priming.

Image: A close-up view of the Clearly Filtered water filter, showing its top surface and the holes where water enters for filtration. This is the component that needs to be primed.

3.3. Assembly

After priming the filter, proceed with assembly:

1. Insert the primed filter into the designated circular opening within the pitcher's upper reservoir. Ensure it is securely seated and forms a snug fit.
2. Place the lid onto the pitcher, aligning it properly with the pitcher body.

4. Operation

4.1. Filling the Pitcher

To fill your pitcher with water for filtration:

1. Open the hinged lid on the top of the pitcher.
2. Place the pitcher under a cold water faucet.
3. Fill the upper reservoir with cold tap water. The water will begin to slowly pass through the filter into the main pitcher body.

Image: A hand holding the Clearly Filtered pitcher under a kitchen faucet, with water flowing into the pitcher's reservoir for filtration.

4.2. Filtration Process

The Clearly Filtered pitcher utilizes Affinity® Filtration Technology. Water flows through multiple stages of filtration media, which ionically bind and extract contaminants while allowing beneficial minerals to pass through. The filtration process is gravity-fed and will take some time for the water to pass completely through the filter.

Image: A diagram illustrating the internal components and working principle of the Affinity® Filtration Technology, showing two cutting-edge components and six advanced media layers.

4.3. Pouring Water

Once the water has completely filtered into the main pitcher body, it is ready for consumption:

1. Lift the pitcher by its comfort handle.
2. Pour filtered water from the spout into your glass or container. The spill-resistant design helps prevent drips.

Image: A person pouring filtered water from the Clearly Filtered pitcher into a glass, demonstrating the pitcher's ergonomic design and ease of use.

5. Maintenance

5.1. Cleaning the Pitcher

To maintain hygiene and performance, clean your pitcher regularly:

• Wash the pitcher body and lid with mild dish soap and warm water. Rinse thoroughly.
• Do not use abrasive cleaners or scrubbers, as these can scratch the pitcher's surface.
• The filter itself should only be rinsed with cold water; do not use soap on the filter.

5.2. Filter Replacement

The Clearly Filtered filter has a life of approximately 100 gallons, which typically lasts about 4 months with average daily use (equivalent to about 200 pitcher refills). Replace your filter when:

• The recommended 100-gallon capacity or 4-month period has been reached.
• Filtration becomes noticeably slower, indicating the filter media is saturated.
• You notice a change in the taste or odor of the filtered water.

To replace the filter:

1. Remove the old filter from the pitcher's reservoir and dispose of it responsibly.
2. Take a new Clearly Filtered replacement filter.
3. Prime the new filter following the instructions in Section 3.2.
4. Insert the primed new filter into the pitcher's reservoir, ensuring it is securely seated.

Image: A graphic highlighting the extended filter life of the Clearly Filtered pitcher, stating it lasts 2.5 times longer than standard store-bought filters.

Image: A visual representation of replacement filter options, including saving money, customizing schedules, and no commitment for subscription services.

6. Troubleshooting

If you encounter any issues with your Clearly Filtered Water Pitcher, please refer to the following common problems and solutions:

• Slow Filtration:
  • Ensure the filter was properly primed before first use or after replacement. Re-prime if unsure (refer to Section 3.2).
  • If your tap water is heavily contaminated, the filter may work harder, naturally leading to a slower flow rate. This indicates the filter is effectively removing impurities.
  • If the filter is nearing the end of its 100-gallon or 4-month life, its flow rate will decrease. Consider replacing the filter.
• Leaking from Lid or Spout:
  • Ensure the lid is securely and correctly seated on the pitcher body.
  • Check for any obstructions around the lid or spout that might prevent a proper seal.
• Unusual Taste or Odor in Filtered Water:
  • Confirm the filter was properly primed. An unprimed filter may release residual carbon dust.
  • If the filter is new, a slight initial taste may dissipate after a few uses.
  • If the issue persists, or if the filter is old, it may be time for a replacement.

If these troubleshooting steps do not resolve your issue, please contact Clearly Filtered customer support for further assistance.

7. Specifications

Detailed specifications for the Clearly Filtered No.1 Filtered Water Pitcher, Model P-V3:

• Model: P-V3
• Product Dimensions: 10.87"L x 5.25"W x 11.4"H
• Item Weight: 2.8 Pounds
• Filter Life: Approximately 100 gallons (or 4 months)
• Materials: Medical-grade, 100% BPA/BPS-free Tritan plastic
• Installation Type: Countertop
• Power Source: Manual (gravity-fed)
• Supported Water TDS Level Maximum: 500 PPM

Image: A close-up view of the Clearly Filtered pitcher's handle and body, with text emphasizing its construction from medical-grade, BPS/BPA-free, phthalate-free materials.

8. Performance Data

The Clearly Filtered Affinity® Filtration Technology is rigorously tested by independent, accredited laboratories to comply with NSF/ANSI standards 42, 53, 401, and 473. This ensures your tap water is free from up to 99.9% of 365+ contaminants.

Key Contaminant Removal Rates:

For complete performance data, please refer to the official Clearly Filtered website.

Image: A table detailing the removal percentages of various contaminants by Clearly Filtered's Affinity® Filtration Technology, including fluoride, microplastics, chromium, HAA5, PFAS, chemical disinfectants, pharmaceuticals, and chlorine.

Image: A comparison chart illustrating the differences between Affinity® Filtration and a Standard Carbon Filter in terms of country of origin, capacity, filter life, and removal rates for fluoride, microplastics, lead, and PFAS.

9. Warranty and Support

Clearly Filtered stands behind the quality of its products. For detailed warranty information, product registration, or to access customer support, please visit the official Clearly Filtered website. You can also find information on purchasing genuine replacement filters and accessories there.

Manufacturer: Clearly Filtered