Air Wick Advanced Plug-In Scented Oil Warmer and Refills

Introduction

The Air Wick Advanced Plug-In Scented Oil Warmer provides continuous and long-lasting fragrance for your home. This device features anti-fading technology that automatically releases subtle pulses of fragrance, ensuring the scent remains noticeable for up to 60 days. It is infused with 2x more natural essential oils for an incredible fragrance experience. This manual outlines the setup, operation, and maintenance of your device to ensure optimal performance and a pleasant fragrance experience.

Key features include a fragrance boost on demand, activated by a touch-button for a 45-minute burst of scent, and a low-refill indicator that turns red when the oil is low. The warmer also offers five adjustable fragrance settings to customize intensity and frequency of scent release, and a subtle indicator light for illumination.

Setup

1. Unpack Components: Carefully remove the Air Wick Advanced Plug-In Warmer and the scented oil refill from their packaging.
2. Prepare Refill: Unscrew and remove the cap from the scented oil refill bottle.
3. Insert Refill: Insert the scented oil refill into the bottom of the warmer unit. Push firmly until you hear a click, ensuring it is securely seated.
4. Plug In: Plug the assembled warmer unit into an upright electrical outlet. Ensure the unit is vertical.

Image: Air Wick Advanced Plug-In Scented Oil Warmer and Refills in packaging.

Image: Hands unboxing and preparing an Air Wick Advanced Plug-In Warmer and refill for insertion.

Operating Instructions

1. Adjust Fragrance Intensity: The warmer features a dial on the top with 5 fragrance settings. Rotate the dial to select your desired intensity. Setting 1 provides the lowest fragrance release, while Setting 5 provides the highest.
2. Fragrance Boost: For an instant burst of fragrance, press the button located on the front of the device. The boost mode will last for 45 minutes before automatically returning to its previous setting. When boost mode is active, both the top indicator light and the refill light will illuminate.
3. Indicator Light: The warmer includes a subtle light that provides illumination, helping to guide you in dimly lit areas.

Image: Air Wick Advanced Plug-In Warmer plugged into an outlet, showing the top dial for fragrance settings.

Maintenance

• Refill Replacement: When the scented oil refill is nearing empty, the low-refill indicator will turn red. To replace, unplug the warmer from the outlet, remove the old refill by pulling it downwards, and insert a new refill as described in the Setup section.
• Cleaning: Always unplug the device before cleaning. Wipe the exterior of the warmer unit with a dry, soft cloth. Do not use liquid cleaners or immerse the unit in water. Ensure the unit is completely dry before plugging it back in.

Troubleshooting

• No Scent Detected:
  • Ensure the warmer is securely plugged into a functional electrical outlet.
  • Check the fragrance intensity setting; increase it if it's on a very low setting.
  • Verify that the scented oil refill is not empty. Replace if necessary.
  • Confirm the refill is properly inserted into the warmer unit.
• Indicator Light Not Working:
  • If the warmer is dispensing fragrance but the light is off, it may indicate a specific issue with the light component.
  • Try plugging the unit into a different outlet. If the problem persists, contact customer support.
• Device Not Functioning:
  • Plug the warmer into a different electrical outlet to confirm the outlet is working.
  • Ensure the unit is clean and free from any debris or obstructions.

Specifications

Warranty and Support

For specific warranty information, product registration, or to contact customer support, please refer to the original product packaging or visit the official Air Wick website. Always keep the product packaging for reference.

Safety Information:

• Keep out of reach of children and pets.
• Read all precautions and warnings on the back of the scented oil refill packaging before use.
• Do not place in areas where it may be knocked over or come into contact with fabrics.