Razer Viper V3 Pro Wireless Esports Gaming Mouse

1. Introduction

The Razer Viper V3 Pro is a high-performance wireless esports gaming mouse designed for competitive play. It features an ultra-lightweight design and incorporates advanced technologies to deliver precision and responsiveness. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Razer Viper V3 Pro mouse.

Figure 1: Top view of the Razer Viper V3 Pro mouse.

2. What's in the Box

Verify that all components are present in the package:

• Razer Viper V3 Pro Wireless Esports Gaming Mouse
• Razer HyperPolling Wireless Dongle
• USB Type A to USB Type C cable
• Razer Mouse Grip Tape
• Important Product Information Guide

Figure 2: Razer HyperPolling Wireless Dongle and USB-C cable.

3. Setup

3.1 Initial Connection

1. Connect the Razer HyperPolling Wireless Dongle to an available USB-A port on your computer. For optimal performance, use the provided USB Type A to USB Type C cable to position the dongle closer to the mouse.
2. Turn on the Razer Viper V3 Pro mouse using the power switch located on the underside of the mouse.
3. The mouse should automatically pair with the dongle. If pairing does not occur, refer to the troubleshooting section.

Figure 3: Wireless setup with HyperPolling Dongle.

3.2 Software Installation (Razer Synapse)

For full customization and advanced features, install the Razer Synapse software. This software allows you to configure DPI settings, button assignments, polling rate, and monitor battery life.

• Download Razer Synapse from the official Razer website: www.razer.com/synapse
• Follow the on-screen instructions to complete the installation.

3.3 Charging the Mouse

To charge the Razer Viper V3 Pro, connect the USB Type A to USB Type C cable from your computer to the USB-C port on the front of the mouse. The mouse can be used while charging.

3.4 Applying Grip Tape

The included Razer Mouse Grip Tape can be applied to the mouse for enhanced grip and control. Clean the mouse surface before applying the tape for optimal adhesion.

4. Operating Instructions

4.1 Basic Functions

The Razer Viper V3 Pro features standard mouse buttons and a scroll wheel:

• Left Click: Primary action.
• Right Click: Secondary action.
• Scroll Wheel: Scroll up/down, middle click.
• Side Buttons: Programmable for various functions, typically forward/back.

Figure 4: Side view highlighting programmable buttons.

4.2 DPI Adjustment

The mouse features a Focus Pro 35K Optical Sensor Gen-2, allowing for precise 1-DPI step adjustments. DPI settings can be configured via Razer Synapse to match your preference and gaming style.

Figure 5: Focus Pro 35K Optical Sensor Gen-2 capabilities.

4.3 HyperPolling Technology

The Razer Viper V3 Pro supports up to 8000 Hz HyperPolling, providing ultra-low-latency response for competitive gaming. This feature, combined with Razer HyperSpeed Wireless, ensures a smooth and reliable connection.

4.4 Battery Life

The mouse offers up to 95 hours of battery life on a single charge, depending on usage and polling rate settings. Higher polling rates (e.g., 8000 Hz) will consume battery faster. Monitor battery status through Razer Synapse.

Figure 6: Extended battery life for prolonged gaming sessions.

4.5 Optimizing Mouse Accuracy

To improve accuracy, it is recommended to disable the "Enhance pointer precision" option in your Windows mouse settings. Further optimization can be achieved using the Razer Synapse App.

5. Maintenance

5.1 Cleaning

To maintain the performance and appearance of your mouse:

• Use a soft, lint-free cloth to wipe the surface of the mouse.
• For stubborn dirt, slightly dampen the cloth with water or a mild cleaning solution. Avoid harsh chemicals.
• Do not immerse the mouse in water or any liquids.
• Clean the optical sensor periodically with a dry cotton swab to ensure accurate tracking.

5.2 Storage

When not in use for extended periods, store the mouse in a cool, dry place away from direct sunlight and extreme temperatures.

6. Troubleshooting

6.1 Mouse Not Responding / No Connection

• Ensure the mouse is turned on and fully charged.
• Verify the Razer HyperPolling Wireless Dongle is securely connected to a USB port on your computer.
• Try connecting the dongle to a different USB port.
• If using the mouse wirelessly, ensure it is within range of the dongle.
• Attempt to re-pair the mouse with the dongle using Razer Synapse (refer to Synapse software guide for specific steps).
• Test the mouse with the USB-C cable in wired mode to determine if the issue is wireless-specific.

6.2 Inaccurate Tracking / Cursor Jumps

• Clean the optical sensor on the underside of the mouse.
• Ensure you are using the mouse on a suitable surface. The Focus Pro 35K Optical Sensor Gen-2 is designed for various surfaces, including glass, but extreme textures or highly reflective surfaces can affect performance.
• Check and adjust DPI settings in Razer Synapse.
• Disable "Enhance pointer precision" in Windows mouse settings.

6.3 Battery Drains Quickly

• Reduce the polling rate setting in Razer Synapse. Higher polling rates consume more power.
• Ensure the mouse is fully charged before use.
• Check for any background applications or settings that might be keeping the mouse active unnecessarily.

7. Specifications

8. Warranty and Support

For detailed warranty information and technical support, please visit the official Razer support website or refer to the "Important Product Information Guide" included in your package.

Official Razer Support: support.razer.com