ROGTZ TYGJ-018NEW 5-Ton Electric Hydraulic Car Jack Kit Instruction Manual

1. Introduction

This manual provides essential instructions for the safe and effective operation and maintenance of your ROGTZ TYGJ-018NEW 5-Ton Electric Hydraulic Car Jack Kit. Please read this manual thoroughly before use and retain it for future reference. This kit is designed to assist with tire changes and minor vehicle maintenance tasks.

2. What's in the Box

Your ROGTZ Electric Hydraulic Car Jack Kit includes the following components:

• Electric Hydraulic Car Jack
• Power Impact Wrench
• Emergency Toolbox (containing safety hammer, spare fuses, various sockets, gloves, etc.)
• Tire Inflator Pump (integrated)
• Power Cables (for cigarette lighter and battery clips)
• Various Nozzles for inflation

Image 2.1: All components included in the ROGTZ Electric Hydraulic Car Jack Kit.

3. Safety Precautions

• Always operate the jack on a flat, firm, and level surface. Never use it on a sloped or uneven ground.
• Ensure the vehicle's parking brake is engaged and the transmission is in 'Park' (automatic) or 'first gear' (manual).
• Chock the wheels diagonally opposite to the wheel being lifted to prevent accidental movement.
• Do not exceed the maximum load capacity of 5 tons.
• Never place any part of your body under a vehicle supported only by the jack. Always use jack stands for additional support.
• Keep hands and clothing clear of moving parts.
• Use the reflective emergency box and LED lights for visibility, especially at night or in low-light conditions.
• Wear protective gloves provided when handling tools.

4. Setup

1. Prepare the Vehicle: Park the vehicle on a flat, firm surface. Engage the parking brake and place the transmission in 'Park' or 'first gear'. Chock the wheels diagonally opposite to the wheel you intend to lift.
2. Set Up Warning: Place the reflective emergency box behind the vehicle to alert other drivers, especially if on a roadside.
3. Position the Jack: Select an appropriate lifting point under the vehicle's chassis, ensuring it can provide stable support. Position the jack directly under this point.
4. Connect Power: Insert the power cord into the jack's power input. Connect the other end to your vehicle's 12V cigarette lighter socket or directly to the car battery using the provided battery clips.

Image 4.1: Proper placement of the jack and emergency warning case during operation.

5. Operating Instructions

5.1. Using the Electric Hydraulic Jack

1. Ensure the jack is correctly positioned under the vehicle's lifting point.
2. Press the power button (usually marked 'UP') to start lifting the vehicle.
3. Monitor the lifting process. Once the vehicle is at the desired height (tire is off the ground), press the 'O' button to pause the lifting.
4. After completing your task, press the 'DOWN' button to slowly lower the vehicle until the jack is at its minimum height.

Image 5.1: The electric hydraulic jack positioned under a vehicle, ready for lifting.

5.2. Using the Impact Wrench

1. Pull out the cable from the jack and connect it to the electric impact wrench.
2. Select the appropriate socket size (17-23mm) for your lug nuts. Two sleeves are provided, offering four sizes.
3. To loosen nuts: Set the power switch to 'II' (loosening mode). Press and hold until the lug nut is loose.
4. To tighten nuts: Set the power switch to 'I' (tightening mode). Press and hold until the lug nut is securely tightened.

Image 5.2: The impact wrench with various sockets for lug nut removal and installation.

5.3. Using the Tire Inflator Pump

1. Open the built-in tire pump compartment on the jack.
2. Connect the inflator hose to the tire's air valve.
3. Press the inflation button (usually marked with a pump icon) to start inflating the tire.
4. Monitor the real-time pressure gauge. Once the desired pressure is reached, close the inflation button.
5. Use the provided nozzles for inflating other items like balls or bicycles.

Image 5.3: The integrated tire inflator pump connected to a vehicle tire.

5.4. Using the LED Light

The jack features a built-in LED light for illumination. To activate it, press the light button (usually marked with a light bulb icon). This is particularly useful for working in low-light conditions or at night.

Image 5.4: The LED light on the jack providing illumination during use.

5.5. Official Product Videos

6. Maintenance

6.1. Replacing the Fuse

If the device stops working, the fuse in the cigarette lighter plug may need replacement.

1. Unscrew the metal part at the front of the cigarette lighter plug anticlockwise.
2. Take out the broken fuse and replace it with a spare fuse (found in the emergency toolbox).
3. Screw the metal part clockwise to secure.

Image 6.1: Step-by-step guide for replacing the fuse in the power plug.

7. Troubleshooting

If the device is not functioning as expected, please check the following:

• Ensure all power connections are secure and the vehicle's 12V power source is active.
• Check the fuse in the cigarette lighter plug and replace if blown (refer to Maintenance section).
• Verify the jack is placed on a flat, firm surface and not overloaded.
• For the impact wrench, ensure the correct socket size is used and fully engaged with the lug nut.
• For the inflator, ensure the hose is securely attached to the tire valve.

8. Specifications

Product Dimensions: 15 x 12 x 5 inches

Item Weight: 16 pounds

9. Warranty and Support

Specific warranty details are not provided in this manual. For warranty information, technical support, or service inquiries, please refer to the manufacturer's official website or contact their customer service department directly. Keep your purchase receipt as proof of purchase.