Introduction
Thank you for choosing the BONLICHT 3-Light Brushed Nickel Adjustable Track Lighting Fixture. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.
Image: The BONLICHT 3-Light Brushed Nickel Adjustable Track Lighting Fixture, featuring three clear glass shades and a brushed nickel finish.
Safety Information
- WARNING: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- Do not exceed the maximum wattage specified for the bulbs (60W per bulb).
- Ensure the fixture is securely mounted to a structural element of the ceiling or wall.
- Handle glass components with care to prevent breakage.
- This fixture is designed for indoor use only.
Package Contents
Verify that all components are present before beginning installation:
- Lighting Fixture Body (with 3 adjustable track heads)
- Clear Glass Shades (3 pieces)
- Mounting Hardware (screws, wire nuts, mounting plate)
- Instruction Manual
Note: Light bulbs are not included and must be purchased separately.
Setup and Installation
This fixture can be installed as a ceiling light or a wall-mounted vanity light. Installation should be performed by a qualified individual.
Tools Required (Not Included):
- Screwdriver (Phillips and Flathead)
- Wire Strippers
- Electrical Tape
- Ladder
Installation Steps:
- Turn Off Power: Before starting, ensure the power supply to the installation area is turned off at the circuit breaker or fuse box.
- Prepare Mounting Surface: Secure the mounting plate to the junction box in your ceiling or wall using the provided screws. Ensure the plate is firmly attached.
- Wire Connections: Connect the fixture's wires to your household electrical wires. Match the black wire (live) from the fixture to the black wire from the junction box, the white wire (neutral) from the fixture to the white wire from the junction box, and the ground wire (bare copper or green) from the fixture to the ground wire from the junction box. Secure connections with wire nuts and electrical tape.
- Mount Fixture: Carefully align the fixture body with the mounting plate and secure it with the provided screws.
- Install Glass Shades: Attach the clear glass shades to each light head. Ensure they are securely fastened.
- Install Bulbs: Screw in the appropriate E26 base bulbs (not included) into each socket. Do not exceed 60W per bulb.
- Restore Power: Once installation is complete and all components are secure, restore power at the circuit breaker.
Image: Dimensional diagrams illustrating the fixture's size when installed as a vanity light (17.3 inches wide, 5.1 inches high) and as a ceiling light (17.3 inches wide, 9.9 inches high).
Operating Instructions
Bulb Requirements:
This fixture uses E26 base bulbs, with a maximum wattage of 60W per bulb. It is compatible with LED, incandescent, and halogen bulbs. For dimming functionality, use dimmable bulbs with a compatible dimmer switch (sold separately).
Adjusting Light Heads:
The track heads are multi-directional and can be rotated 90 degrees vertically and 350 degrees horizontally. This allows you to direct light precisely where needed. Gently adjust the heads to your desired angle.
Image: Visual guide for compatible E26 bulb types (Vintage Filament, CFL, Incandescent, Halogen) and illustrations demonstrating the 90-degree vertical and 350-degree horizontal rotation of the light heads.
Maintenance
- Cleaning: Always disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or glass.
- Bulb Replacement: Ensure the fixture is cool and power is disconnected before replacing bulbs. Screw out the old bulb and screw in a new E26 base bulb, ensuring it does not exceed 60W.
- Inspection: Periodically check all connections and mounting hardware for tightness.
Image: Detailed close-up views of the fixture's mounting base, clear glass shade, and bulb socket, highlighting the quality of materials and construction.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | 1. Power is off 2. Loose wiring connection 3. Faulty bulb | 1. Check circuit breaker/fuse 2. Verify all wire connections are secure (with power off) 3. Replace bulb |
| Light flickers | 1. Loose bulb 2. Incompatible dimmer switch/bulb 3. Loose wiring | 1. Tighten bulb 2. Ensure dimmer and bulbs are compatible 3. Check wiring connections (with power off) |
| Dimming not working | 1. Non-dimmable bulbs 2. Incompatible dimmer switch | 1. Use dimmable E26 bulbs 2. Install a compatible dimmer switch |
Product Specifications
| Feature | Specification |
|---|---|
| Brand | BONLICHT |
| Model Number | 3-3950-3SP-SN |
| Color | Brushed Nickel |
| Number of Lights | 3 |
| Light Fixture Form | Spotlight / Track Lighting |
| Shade Material | Glass (Clear) |
| Bulb Base | E26 |
| Max Wattage per Bulb | 60 Watts |
| Voltage | 120 Volts |
| Power Source | Hardwired |
| Indoor/Outdoor Usage | Indoor Use Only |
| Special Features | Adjustable Heads, Dimmable (with compatible bulbs/switch) |
| Mounting Type | Ceiling Mount / Wall Mount |
| Item Weight | 5.84 pounds |
| Package Dimensions | 17.25 x 11.75 x 7.5 inches |
Warranty and Customer Support
For warranty information or technical assistance, please contact BONLICHT customer support. Refer to your purchase documentation or the BONLICHT official website for contact details.
Website: Visit the BONLICHT Store on Amazon