Product Overview
The Feit Electric ADJ4000/3CCT/MM/LED Multi-Directional Light is designed for efficient and flexible illumination in various spaces such as garages, attics, and other dark areas. This light panel features an E26 standard base for easy installation and independently adjustable rotating panels that can fold down up to 90° to direct light precisely where needed.
It integrates non-dimmable LEDs, providing 4000 Lumens of light while consuming only 35 watts, offering significant energy savings compared to traditional incandescent bulbs. The light includes a built-in motion sensor that detects movement within a 10-15 foot range, automatically turning the light on and off, and turning off 5 minutes after motion ceases for enhanced energy efficiency. Users can select between three color temperatures: 3000K Bright White, 4000K Cool White, and 5000K Daylight White.
With a lifespan of up to 18 years (20,000 hours), this light panel is built for long-lasting, reliable performance. It is damp rated, making it suitable for both indoor and outdoor use.
Image: Feit Electric LED Motion Sensor Light Panel product packaging, highlighting 4000 lumens, 300W equivalent using 35W, and 90° adjustable panels.
Setup and Installation
The Feit Electric LED Motion Sensor Light Panel is designed for quick and easy installation into any standard E26 light socket.
Before Installation:
- Power Off: Ensure the power to the light fixture is turned off at the circuit breaker before beginning installation.
- Select Light Color: Before screwing the bulb into the socket, use the switch located on the base of the light to select your desired color temperature (3000K Bright White, 4000K Cool White, or 5000K Daylight White). This setting cannot be changed once installed without unscrewing the bulb.
Installation Steps:
- Carefully screw the light panel into a standard E26 light socket until it is secure. Do not overtighten.
- Once installed, restore power to the light fixture at the circuit breaker.
- Adjust the three foldable LED panels to your preferred angle. The panels can be rotated up to 90 degrees to direct light as needed for optimal illumination.
Image: The Feit Electric LED Motion Sensor Light Panel with its three adjustable panels fully extended, demonstrating its multi-directional lighting capability.
Operating Instructions
Motion Sensor Functionality:
The integrated motion sensor automatically activates the light when movement is detected within its 10-15 foot range. The light will remain on as long as motion is detected. After motion stops, the light will automatically turn off after approximately 5 minutes to conserve energy.
Adjustable Light Panels:
The three LED panels are independently adjustable, allowing you to customize the light distribution. Each panel can be folded down up to 90 degrees. This feature is useful for directing light to specific areas, such as a workbench in a garage or a particular section of an attic.
Image: Feit Electric LED Motion Sensor Light Panel installed in an outdoor covered area, demonstrating its wide illumination coverage with adjustable panels.
Color Temperature Selection:
As mentioned in the setup, the desired color temperature (3000K Bright White, 4000K Cool White, or 5000K Daylight White) must be selected via the switch on the base of the bulb before installation. This setting is fixed once the bulb is screwed into the socket.
Maintenance
The Feit Electric LED Motion Sensor Light Panel is designed for long-term, maintenance-free operation with a lifespan of up to 18 years (20,000 hours).
- Cleaning: To clean the light panel, ensure the power is off at the circuit breaker. Use a soft, dry cloth to gently wipe the surfaces. Do not use liquid cleaners or abrasive materials, as they may damage the finish or electronic components.
- Replacement: Due to its long lifespan, frequent replacement is not anticipated. If replacement becomes necessary, ensure power is off and carefully unscrew the old unit before installing a new one.
Troubleshooting
If you encounter issues with your Feit Electric LED Motion Sensor Light Panel, please refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture; bulb not screwed in properly; motion sensor not detecting movement. | Check circuit breaker. Ensure bulb is securely screwed into the E26 socket. Verify motion within the sensor's range. |
| Light stays on continuously. | Continuous motion detected; sensor malfunction. | Ensure no continuous motion is occurring in the sensor's field of view. If the issue persists, contact customer support. |
| Light flickers or dims. | Loose connection; incompatible dimmer (product is non-dimmable). | Tighten the bulb in the socket. Ensure the light is not connected to a dimmer switch, as this product is non-dimmable. |
| Incorrect color temperature. | Wrong setting selected before installation. | Turn off power, unscrew the bulb, adjust the color temperature switch on the base, then re-install. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | LED Garage Light |
| Part Number | ADJ4000/3CCT/MM/LED |
| Brightness | 4000 Lumens |
| Wattage | 35 Watts |
| Equivalent Incandescent | 300 Watts |
| Voltage | 120 Volts |
| Color Temperature (CCT) | 3000K Bright White, 4000K Cool White, 5000K Daylight White (Selectable) |
| Color Rendering Index (CRI) | 80 |
| Bulb Base | E26 Standard |
| Lifespan | Up to 20,000 hours / 18.3 Years |
| Estimated Annual Energy Cost | $4.22 (based on 3 hrs/day use) |
| Adjustable Panels | Yes, up to 90° rotation |
| Motion Sensor Range | 10-15 feet |
| Auto-Off Delay | 5 minutes after motion stops |
| Indoor/Outdoor Usage | Damp Rated for Indoor and Outdoor Use |
| Material | Plastic |
| Product Dimensions | 3.5"L x 8"W x 8"H |
| Item Weight | 9.6 ounces |
Image: Diagram showing the dimensions of the Feit Electric LED Motion Sensor Light Panel: Height 15 inches (38.1 cm), Diameter 3.1 inches (7.84 cm).
Warranty and Support
This Feit Electric LED Motion Sensor Light Panel is backed by a 3-year manufacturer's warranty. This warranty covers any defects or malfunctions under normal use.
For product support, troubleshooting assistance, or to inquire about warranty claims, please contact Feit Electric directly through their official website. Their expert team is available to provide live assistance.
For more information, visit the Feit Electric Store on Amazon.
