1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your VDO Side Camera, model 2910002613800. Designed for vehicle side-view applications, this camera delivers high-quality imaging to enhance safety and visibility. Please read this manual thoroughly before installation and use to ensure proper functionality and longevity of the product.
2. Product Features
- Standard side-view camera design.
- 1080P AHD (Analog High Definition) quality image for clear visuals.
- Automatic day/night sensor and infrared LEDs provide clear images in low-light or dull conditions.
- Supports a 2.0 Megapixel CMOS Sensor for detailed imaging.
- The internal ball camera can be adjusted to achieve the desired viewing angle.
3. What's in the Box
Upon unpacking, please verify that all the following components are present:
- VDO Side Camera Unit
- Mounting Hardware
- Mounting Bracket
- Instruction Manual (this document)
4. Technical Specifications
Image: VDO Side View AHD Camera showing its physical design and a table of technical specifications. The camera is black, compact, and designed for external mounting.
| Feature | Detail |
|---|---|
| Chip Brand | 1/2.8" SONY CMOS Sensor |
| Effective Pixels | 1920(H)×1080(V), 2MP |
| System | 1080P / 30fps AHD |
| Minimum Illumination | 0 LUX (IR LED ON) |
| S/N Ratio (AGV OFF) | ≥48 dB |
| IR LED (Range) | 10 Pcs Wavelength λ = 940nm (5M) |
| Lens Type | 2.9mm/F2.0 |
| Lens Angle | 120° |
| Video Output | 1 Vpp, 75 Ohms |
| Waterproof Rate | IP68 |
| Operation Temperature | -30°C to +70°C |
| Supply Voltage | DC12 / 24V |
| Power Consumption | 1.5 W (max) |
| Dimensions (L×W×H) | 65mm × 92mm × 59mm (2.56"L x 3.62"W x 2.32"H) |
| Weight | 255g (0.56 lbs) |
| Connectivity Technologies | Wired, Wi-Fi |
| Installation Type | Roof Mount |
| Date First Available | February 15, 2024 |
| UPC | 754059108681 |
5. Setup and Installation
The VDO Side Camera is designed for roof mount installation. Professional installation is recommended to ensure proper wiring and secure mounting. Always disconnect the vehicle's battery before beginning any electrical work.
- Choose Mounting Location: Select a suitable location on the side of the vehicle, typically near the roofline, that provides an unobstructed view and allows for secure attachment using the provided mounting bracket.
- Secure the Mount: Use the included hardware to securely fasten the mounting bracket to the chosen location. Ensure the surface is clean and dry before installation.
- Attach the Camera: Mount the camera unit onto the bracket. The ball camera design allows for adjustment of the viewing angle after initial mounting.
- Wiring: Connect the camera's power and video cables according to your vehicle's electrical system and the instructions provided with your display unit. The camera supports DC12/24V power input. Ensure all connections are secure and properly insulated to prevent short circuits and water ingress.
- Adjust Viewing Angle: Power on the vehicle and display unit. Adjust the camera's ball joint to achieve the optimal side-view angle. Tighten the adjustment mechanism to secure the camera in place.
- Test Functionality: Verify that the camera provides a clear image on your display and that the automatic day/night sensor and IR LEDs function correctly in varying light conditions.
Note: For detailed wiring diagrams and specific vehicle integration, consult a qualified automotive technician or refer to your vehicle's service manual.
6. Operating Instructions
The VDO Side Camera operates automatically once properly installed and powered. It is designed for continuous monitoring of the vehicle's side blind spots.
- Automatic Day/Night Mode: The camera features an integrated sensor that automatically detects ambient light levels. In bright conditions, it operates in day mode, providing full-color video. As light diminishes, it switches to night mode, activating its infrared (IR) LEDs to provide clear black-and-white images.
- Viewing Angle Adjustment: If the initial viewing angle is not optimal, the internal ball camera can be slightly adjusted. This typically involves loosening a locking mechanism on the camera housing, repositioning the lens, and then re-tightening it. Refer to the installation section for initial adjustment guidance.
- Display Integration: The camera outputs a standard video signal (1 Vpp, 75 Ohms) compatible with most AHD-enabled vehicle display systems. Ensure your display is set to the correct input channel to view the camera feed.
7. Maintenance
Regular maintenance ensures optimal performance and longevity of your VDO Side Camera.
- Cleaning the Lens: Periodically clean the camera lens with a soft, damp cloth. Avoid abrasive cleaners or materials that could scratch the lens. Ensure the lens is free from dirt, mud, snow, or ice for clear image quality.
- Inspect Wiring: Regularly check all visible wiring and connections for signs of wear, damage, or corrosion. Secure any loose connections.
- Housing Inspection: Inspect the camera housing for any cracks or damage that could compromise its IP68 waterproof rating.
- Environmental Considerations: While the camera is designed for outdoor use and operates in temperatures from -30°C to +70°C, extreme conditions can still affect performance. Ensure the camera is not obstructed by vehicle modifications or debris.
8. Troubleshooting
If you encounter issues with your VDO Side Camera, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No image on display | No power to camera; Loose video connection; Incorrect display input selected; Faulty camera or cable. | Check power supply and fuses; Ensure video cable is securely connected; Select correct input on display; Test with a known good camera/cable if possible. |
| Image is blurry or unclear | Dirty lens; Condensation on lens; Incorrect focus (unlikely for fixed lens); Damaged lens. | Clean the camera lens; Allow time for condensation to dissipate; Inspect lens for damage. |
| Poor image quality at night | IR LEDs obstructed or faulty; Insufficient power for IR LEDs; Lens dirty. | Ensure IR LEDs are clear of obstructions; Check power connections; Clean the camera lens. |
| Image flickers or cuts out | Loose power or video connection; Electrical interference; Faulty cable. | Check all connections; Ensure proper grounding; Route cables away from high-voltage sources; Replace cable if damaged. |
If the problem persists after attempting these solutions, please contact VDO customer support or a qualified technician.
9. Warranty and Customer Support
VDO products are manufactured to high-quality standards and are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official VDO website.
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact VDO customer support. Have your product model number (2910002613800) and purchase information ready when contacting support.
VDO Customer Support: Please refer to the contact information provided on the VDO official website or your product packaging.