OUTPRIZE CC-Carrier-G60-E

OUTPRIZE Trailer Hitch Cargo Rack User Manual

Model: CC-Carrier-G60-E | Brand: OUTPRIZE

1. Introduction & Product Overview

The OUTPRIZE Trailer Hitch Cargo Rack is designed to provide extra storage capacity for your vehicle, ideal for RVs, trucks, SUVs, and vans. Measuring approximately 60 inches long, 24 inches wide, and 14 inches high, it adds about 10 square feet of instant storage space. Its robust construction from high-quality heavy-duty steel ensures exceptional durability and a distributed weight capacity of 500 lbs. The rack features high side rails for secure transport and a rotational structure design that allows it to be folded away for easy storage when not in use.

OUTPRIZE Trailer Hitch Cargo Rack attached to an SUV

Figure 1: OUTPRIZE Trailer Hitch Cargo Rack attached to a vehicle.

2. Product Features

  • Extra Storage Capacity: Measures 60 in. L x 24 in. W x 14 in. H, adding approximately 10 ft² of instant storage space.
  • High Side Rails: Features high side rails with a rotational structure design to keep luggage secure and allow for easy folding when not in use.
  • Durable Construction: Constructed from high-quality heavy-duty steel with a powder coating for protection against rust and corrosion.
  • 500 lbs. Capacity: Offers a distributed weight capacity of 500 lbs, suitable for transporting various cargo, gear, and equipment.
  • Secure Transport: Includes a hitch tightener to prevent wobbling and rattling during travel.
  • Enhanced Safety: Equipped with three red reflectors for improved visibility during nighttime, rainy, or severe weather conditions.
  • Easy Installation: Designed for straightforward assembly and installation, compatible with any 2" Class III or IV hitch receivers.
Diagram showing product features like square tube, mesh base, folding shank, and 2 inch receiver fit

Figure 2: Key features of the cargo rack, including mesh base and folding design.

3. Specifications

AttributeValue
ColorBlack
BrandOUTPRIZE
Item dimensions L x W x H60 x 24 x 14 inches
Load Capacity500 Pounds
Mounting TypeHitch
Automotive Fit TypeUniversal Fit
ManufacturerOUTPRIZE
ModelHitch Cargo Carrier
Item Weight74 pounds
Country of OriginChina
Item model numberCC-Carrier-G60-E
Product dimensions diagram showing 59.1 inches length, 25 inches width, and 14 inches height

Figure 3: Detailed product dimensions.

4. Setup & Installation

The OUTPRIZE Trailer Hitch Cargo Rack is designed for easy assembly and installation, typically taking 30-40 minutes from unboxing. It fits into any 2" Class III or IV hitch receivers.

Assembly Steps:

  1. Unpack all components. Refer to the included parts list to ensure all hardware is present.
  2. Assemble the main cargo basket frame.
  3. Attach the folding shank to the cargo basket using the provided bolts and nuts.
  4. Insert the assembled cargo rack into your vehicle's 2-inch hitch receiver.
  5. Secure the rack to the hitch receiver using the hitch pin and clip.
  6. Install the hitch tightener to minimize wobbling and rattling.
  7. Attach the three red reflectors to the designated areas for enhanced safety.
Product list showing all components included for assembly

Figure 4: All parts included for assembly, with instruction installation included.

Diagram showing the 2 inch receiver fit and how the rack flips up close to the vehicle

Figure 5: The cargo rack is designed to fit 2-inch receivers and can be folded up when not in use.

For a visual guide on the installation process, please refer to the product video available on the product page. The video demonstrates the ease of setup and the folding mechanism.

5. Operating Instructions

Loading Cargo:

To load cargo, ensure the side rails are in the upright position. The rotational structure allows for easy access. Place your items securely within the basket. The high side rails help contain luggage and boxes. For added security, utilize tie-down straps (not included) through the mesh base and around the frame bars to firmly secure your cargo, preventing movement during transit.

Folding Mechanism:

When the cargo rack is not in use, it can be folded upwards against the vehicle for space-saving storage. To fold, first ensure all cargo is removed. Release the clips on the side rails to fold them inwards. Then, release the main pin connecting the rack to the hitch mount, allowing the entire basket to pivot upwards. Secure it in the upright position using the designated pin to prevent it from falling down.

Image showing the cargo rack in its folded position against the vehicle

Figure 6: The cargo rack features a foldable design for convenient storage when not in use.

Safety advice regarding hitch height and exhaust path clearance for the cargo carrier

Figure 7: Important safety advice regarding proper exhaust clearance when installing the cargo carrier.

6. Maintenance

To ensure the longevity and optimal performance of your OUTPRIZE Trailer Hitch Cargo Rack, regular maintenance is recommended:

  • Rust Prevention: While the powder coating provides protection, it is highly recommended to store the rack indoors when not in use. For rust-prone joints, consider applying a truck bedliner paint to enhance rustproofing.
  • Cleaning: Clean the mesh base and frame regularly to remove dirt, debris, and road salt, which can contribute to corrosion. Use mild soap and water, then rinse thoroughly and dry completely.
  • Hardware Check: Periodically inspect all bolts, nuts, and clips to ensure they are tight and secure. Tighten any loose fasteners to maintain structural integrity and prevent rattling.
  • Reflector Condition: Ensure the red reflectors are clean and undamaged for maximum visibility and safety.

7. Troubleshooting

If you encounter any issues with your OUTPRIZE Trailer Hitch Cargo Rack, please refer to the following:

  • Missing or Defective Hardware: If any mounting hardware components are missing or defective upon arrival, please contact OUTPRIZE customer support promptly for a free replacement.
  • Wobbling/Rattling: Ensure the included hitch tightener is properly installed and tightened. This accessory is designed to eliminate movement between the hitch receiver and the cargo rack.
  • Rear Sensor Interference: Some vehicles may experience interference with rear parking sensors when the cargo rack is in the folded-up position. This is a common occurrence with hitch-mounted accessories and typically does not affect camera functionality.

8. Warranty & Support

OUTPRIZE stands behind the quality of its products:

  • 1-Year Guarantee: The OUTPRIZE cargo carrier hitch mount offers a 1-YEAR guarantee for any product quality issues.
  • Customer Satisfaction: Our dedicated support team is committed to ensuring your satisfaction and is ready to provide a satisfactory solution for all your concerns.
  • Easy Returns: Enjoy 30-day easy returns for your convenience.

For further assistance or to claim warranty support, please contact OUTPRIZE customer support through the retailer's platform or visit the official OUTPRIZE store.

Related Documents - CC-Carrier-G60-E

Preview OUTPRIZE RML1430PB Power Inlet Box Installation Guide | 30A NEMA L14-30P
Detailed installation instructions for the OUTPRIZE RML1430PB 30A 125/250V NEMA L14-30P generator power inlet box. Learn safe wiring and mounting procedures.
Preview Experion Series-C I/O Specification
Technical specifications and configuration guide for Honeywell Experion Series-C I/O modules, detailing analog, digital, and universal input/output module characteristics, sizing, and function matrices.
Preview Honeywell Experion Series-C I/O Specification
Technical specifications and function matrix for Honeywell Experion Series-C I/O modules, detailing sizing, operational parameters, and module compatibility for industrial automation systems.
Preview Honeywell Experion Series-C I/O Specification
Technical specifications and function matrices for Honeywell Experion Series-C I/O modules, including analog and digital input/output configurations.
Preview Dynair CC Duct Axial Fans: Product Catalog and Technical Specifications
Explore the Dynair CC series of duct axial fans, featuring detailed specifications, construction information, performance data, dimensions, and a comprehensive range of accessories for industrial ventilation applications. Includes ErP compliance and IE3 motor information.
Preview Honeywell Experion PKS Universal Marshalling Solutions Installation and User's Guide
Comprehensive installation and user guide for Honeywell Experion PKS Universal Marshalling Solutions (SCA), covering system features, safety protocols, and module specifications.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.