PYXISTIFY LP1S White True Wireless Earbuds User Manual

1. Introduction

Thank you for choosing the PYXISTIFY LP1S White True Wireless Earbuds. These earbuds are designed to provide a high-fidelity audio experience with the convenience of wireless connectivity. Featuring Bluetooth 5.0 technology, dual diaphragms, and a 10mm loudspeaker unit, they deliver clear stereo sound with low latency and efficient power consumption. The smart touch controls and compact design ensure a comfortable fit and ease of use.

Image: The PYXISTIFY LP1S White True Wireless Earbuds resting inside their charging case, displaying the 'Lenovo' branding on the case.

2. Package Contents

Please check the package carefully to ensure all items are present:

• LP1S White Earbuds (x2)
• Charging Case (x1)
• USB Charging Cable (Type-C) (x1)
• Earcaps (x4, various sizes)
• User Manual (x1)

3. Product Features

• Advanced Audio: Equipped with dual diaphragms and a 10mm loudspeaker unit for improved sound quality and a wide bass range.
• Bluetooth 5.0: Ensures stable connection, low latency, and low power consumption for an optimized wireless experience.
• Long Battery Life: Extended usage time with a convenient Type-C port for fast charging.
• Smart Touch Control: Intuitive touch sensors for easy management of music playback, calls, and voice assistant.
• Dual Host Design: Both earbuds can be used independently, offering flexibility without primary/secondary distinction.
• Comfortable Fit: Compact and lightweight design ensures a secure and comfortable fit in the ear canal.
• IPX4 Waterproof: Resistant to sweat, rain, and dust, making them suitable for sports and outdoor activities.
• Built-in Dual Mic: Offers noise reduction for clearer hands-free calls in stereo mode.

Image: Diagram illustrating the dual microphone feature for hands-free communication and noise reduction.

Image: Cross-section diagram highlighting the 10mm moving coil horn, illustrating its components and contribution to sound quality.

4. Setup

4.1 Charging the Earbuds and Case

Before first use, fully charge the earbuds and the charging case.

1. Place both earbuds into the charging case.
2. Connect the provided USB Type-C charging cable to the charging port on the case and the other end to a USB power adapter (not included) or a computer's USB port.
3. The indicator light on the charging case will illuminate to show charging status. A full charge typically takes approximately 1.5 hours for the earbuds and 2 hours for the case.
4. Once fully charged, the indicator light may change or turn off depending on the case's design. Disconnect the charging cable.

Image: The LP1S White earbuds inside their open charging case, ready for charging or use.

4.2 Pairing with Your Device

The earbuds will automatically enter pairing mode when taken out of the charging case.

1. Ensure the earbuds are charged.
2. Open the charging case and take out both earbuds. They will automatically power on and attempt to pair with each other.
3. On your smartphone, tablet, or other Bluetooth-enabled device, go to the Bluetooth settings.
4. Turn on Bluetooth.
5. Search for available devices. You should see "Lenovo LP1S" or similar in the list.
6. Select "Lenovo LP1S" to connect. Once connected, a voice prompt will confirm the successful pairing.
7. After initial pairing, the earbuds will automatically connect to the last paired device when taken out of the case, provided Bluetooth is enabled on the device.

Image: The LP1S White earbuds and their charging case positioned next to a smartphone, illustrating the pairing environment.

Note: If pairing fails, place the earbuds back into the case, close the lid, wait a few seconds, and then try again.

5. Operating Instructions

5.1 Touch Controls

The LP1S earbuds feature intuitive touch controls on each earbud.

5.2 Music Playback

• Play/Pause: Single tap either earbud.
• Next Track: Double tap the right earbud.
• Previous Track: Double tap the left earbud.
• Volume Control: Volume is controlled via your connected device.

5.3 Phone Calls

• Answer/End Call: Single tap either earbud during an incoming call or during an active call.
• Reject Call: Long press either earbud for 2 seconds during an incoming call.

6. Maintenance

6.1 Cleaning

• Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth.
• Do not use abrasive cleaners, alcohol, or chemical solvents.
• Gently remove any earwax or debris from the earbud tips and speaker mesh using a small, soft brush or cotton swab.
• Ensure the charging contacts on both the earbuds and the case are clean and dry to ensure proper charging.

6.2 Storage

• When not in use, always store the earbuds in their charging case to protect them and keep them charged.
• Store the device in a cool, dry place, away from extreme temperatures, humidity, and direct sunlight.
• Avoid dropping or subjecting the earbuds and case to strong impacts.

7. Troubleshooting

If you encounter any issues with your LP1S earbuds, please refer to the following common solutions:

8. Specifications

9. Warranty and Support

This product is offered by a small business brand. For any product-related inquiries, technical support, or warranty claims, please contact the seller directly through the platform where you purchased the item.

Please refer to your purchase receipt or order details for specific warranty terms and contact information.