Allone Wireless Game Controller #Unipo Sanrio Characters Cinnamoroll

1. Introduction

This manual provides instructions for the Allone Wireless Game Controller, featuring Sanrio Characters Cinnamoroll design. This controller is designed for use with Nintendo Switch, Switch Lite, Switch OLED, and Switch2 consoles, offering both wired and wireless connectivity options. It integrates advanced features to enhance your gaming experience.

2. Key Features

The Allone Wireless Game Controller is equipped with several features to optimize gameplay:

• Gyro and Accelerometer Sensors: Provides precise motion control for compatible games.
• Vibration Function: Enhances immersion with tactile feedback.
• Continuous Fire (Turbo) Function: Allows for rapid, repeated input of a button press.
• Macro Programming: Customize button sequences for complex actions.
• Automatic Sleep Function: Conserves battery life when not in use.
• Screenshot Function: Capture in-game moments easily.
• Wired and Wireless Connectivity: Offers flexible connection options.
• Long Battery Life: Enjoy over 10 hours of gameplay on a single charge.

3. Setup and Connection

3.1 Wireless Connection (Bluetooth)

1. Ensure your Nintendo Switch console is powered on and updated to the latest firmware.
2. From the HOME Menu, select 'Controllers' > 'Change Grip/Order'.
3. On the Allone controller, press and hold the SYNC button (usually a small button on the top or back) for a few seconds until the player indicator lights begin to flash.
4. The console will detect the controller. Once detected, the player indicator light(s) on the controller will remain solid, indicating a successful connection.

3.2 Wired Connection

1. Connect the provided USB-C cable to the controller and the other end to a USB port on your Nintendo Switch dock.
2. Ensure 'Pro Controller Wired Communication' is enabled in your Switch System Settings (System Settings > Controllers and Sensors > Pro Controller Wired Communication).
3. The controller should automatically connect and be ready for use.

4. Operating Instructions

4.1 Continuous Fire (Turbo) Function

The controller supports continuous fire for various buttons, allowing for rapid, repeated input. There are three adjustable speeds.

1. Setting Turbo: Press and hold the button you wish to set for continuous fire (e.g., A, B, X, Y, LT, RT, LB, RB, or D-pad directions). While holding, press the Turbo button once. The button will now activate continuous fire when pressed.
2. Setting Auto-Turbo: Press and hold the button you wish to set for auto-continuous fire. While holding, press the Turbo button twice. The button will now continuously activate without needing to be held down.
3. Adjusting Turbo Speed: While holding the Turbo button, move the Right Analog Stick up or down to cycle through the three speed settings (5 times/second, 12 times/second, 20 times/second).
4. Clearing Turbo: To clear the Turbo setting for a specific button, press and hold the button, then press the Turbo button twice. To clear all Turbo settings, press and hold the Turbo button for 5 seconds.

4.2 Macro Programming

The controller features macro programming, allowing you to assign a sequence of up to 14 button presses to a single button (e.g., A, B, X, Y, LB, RB, LT, RT, D-pad, Left Stick Press, Right Stick Press).

1. Entering Macro Programming Mode: Press and hold the 'M' button (Macro button) on the back of the controller until the indicator light flashes.
2. Recording Macro: Press the sequence of buttons you wish to record. The controller will record up to 14 inputs.
3. Saving Macro: Press the 'M' button again to save the macro. The indicator light will stop flashing.
4. Assigning Macro: To assign the recorded macro to a specific button, press and hold the 'M' button, then press the desired button (e.g., one of the back buttons).
5. Clearing Macro: To clear a macro, enter programming mode, then press the 'M' button twice without recording any inputs.

5. Charging the Controller

The controller is equipped with a built-in rechargeable battery. Use the included charging cable to power the device.

• Connect the USB-C end of the charging cable to the controller and the USB-A end to a power source (e.g., Nintendo Switch dock, USB wall adapter, or computer USB port).
• The charging indicator light on the controller will illuminate during charging and turn off when fully charged.
• A full charge typically takes 2-3 hours and provides over 10 hours of continuous gameplay.

6. Care and Maintenance

To ensure the longevity and optimal performance of your controller, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to wipe the controller. For stubborn dirt, slightly dampen the cloth with water. Avoid using harsh chemicals or abrasive cleaners.
• Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
• Handling: Avoid dropping the controller or subjecting it to strong impacts, as this can damage internal components.
• Liquid Exposure: Keep the controller away from liquids. If it comes into contact with liquid, power it off immediately and allow it to dry completely before attempting to use it again.

7. Troubleshooting

If you encounter issues with your controller, refer to the following common problems and solutions:

• Controller not connecting: Ensure the controller is charged. Try re-pairing the controller via the Switch's 'Change Grip/Order' menu. If using wired, check the cable connection and ensure 'Pro Controller Wired Communication' is enabled in Switch settings.
• Input lag or unresponsiveness: Ensure there are no obstructions between the controller and the console. Move closer to the console. Check for interference from other wireless devices.
• Buttons not responding: Test the buttons in the Switch's controller test menu (System Settings > Controllers and Sensors > Test Input Devices). If specific buttons are unresponsive, the controller may require service.
• Vibration not working: Ensure the vibration function is enabled in the game settings and on the Switch console (System Settings > Controllers and Sensors > Vibration).
• LEDs not lighting up: This could indicate a low battery or a connection issue. Charge the controller fully and attempt to reconnect.

8. Specifications

9. Warranty and Support

9.1 Manufacturer's Warranty

This product comes with a six-month manufacturer's warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

9.2 Customer Support

For any issues, questions, or support needs regarding your Allone Wireless Game Controller, please contact our customer support center. Our team is dedicated to providing thorough assistance.

Contact information can typically be found on the product packaging or the official Allone website.

10. Safety Information

Please read and follow all safety instructions to prevent injury or damage to the product:

• Do not attempt to disassemble or modify the controller.
• Keep the controller away from water and other liquids.
• Avoid exposing the controller to extreme temperatures or direct sunlight.
• Use only the provided charging cable or a certified equivalent.
• Keep out of reach of small children.