1. Introduction
This manual provides instructions for the assembly, use, and maintenance of your VASAGLE Dining Table Set for 4, model UKDT070B02. This set includes one dining table and two benches, designed for small spaces while accommodating up to four people. Please read these instructions carefully before assembly and use to ensure proper function and safety.
2. Safety Information
WARNING: Failure to follow these instructions may result in injury or damage to the product.
- Maximum Load Capacity: Do not exceed 220 lb (100 kg) on the table or each bench. Overloading can cause structural failure and injury.
- Liquid Spillage: Wipe up any spills immediately with a dry cloth to prevent damage to the surface and potential slipping hazards.
- Assembly: Follow the included instructions carefully for safe and proper assembly. Ensure all screws and fasteners are tightened securely before use. Periodically check and re-tighten all connections.
- Placement: Place the dining set on a flat, stable surface. Avoid placing it near heat sources or in direct sunlight for prolonged periods to prevent material degradation.
- Children: Keep small parts and packaging materials away from children during assembly. Do not allow children to climb on the table or benches.
3. Package Contents
Before beginning assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
| Item | Description | Quantity |
|---|---|---|
| Tabletop | Engineered wood surface for the dining table. | 1 |
| Table Legs | Alloy steel frames for the table. | 4 |
| Bench Seats | Engineered wood surfaces for the benches. | 2 |
| Bench Legs | Alloy steel frames for the benches. | 4 (2 per bench) |
| Hardware Pack | Screws, bolts, Allen key, and other fasteners. | 1 set |
| Instruction Manual | This document. | 1 |
4. Setup and Assembly
Assembly is required. Please follow the step-by-step instructions provided in the included assembly guide. An Allen key is provided for your convenience. It is recommended to assemble the unit on a soft, clean surface to prevent scratches.
4.1 Tools Required
- Allen Key (included)
- Phillips Head Screwdriver (not included, may be helpful for some fasteners)
4.2 Assembly Steps
- Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface to identify each piece. Refer to the "Package Contents" section to ensure all items are present.
- Assemble Table Frame: Attach the table legs to the table frame using the provided screws and Allen key. Ensure all connections are finger-tight before fully tightening.
- Attach Tabletop: Secure the tabletop to the assembled table frame. Make sure the tabletop is aligned correctly before tightening all screws firmly.
- Assemble Bench Frames: For each bench, attach the bench legs to the bench frame using the provided hardware.
- Attach Bench Seats: Secure each bench seat to its respective assembled bench frame. Ensure proper alignment and tighten all screws.
- Final Tightening: Once all components are assembled, go back and firmly tighten all screws and bolts on both the table and benches. Do not overtighten.
- Adjust Feet: The table and benches are equipped with adjustable feet. Adjust them as needed to ensure stability and prevent wobbling on uneven floors.
Image: The VASAGLE Dining Table Set for 4, model UKDT070B02, assembled in a modern kitchen. The table and two benches feature heather greige wood-look surfaces and ink black metal frames. This image shows the complete set in a typical use environment.
Image: A diagram illustrating the dimensions of the VASAGLE Dining Table Set. The table measures 43.3 inches (110 cm) in length, 27.6 inches (70 cm) in width, and 29.5 inches (75 cm) in height. Each bench measures 38.2 inches (97 cm) in length, 11.8 inches (30 cm) in width, and 19.7 inches (50 cm) in height, with a footrest height of 4.5 inches (11.5 cm). This provides a clear visual reference for the product's size.
Image: A close-up view of the VASAGLE Dining Table Set demonstrating its space-saving feature. The two benches are shown neatly tucked underneath the dining table, highlighting how they can be stored to maximize floor space when not in use. This design is ideal for smaller living areas.
Image: A detailed view of the adjustable feet and foot pads on the VASAGLE Dining Table Set. One inset shows an adjustable foot being rotated, indicating its function to stabilize the furniture on uneven surfaces. The other inset shows a foot pad, designed to protect floors from scratches. These features contribute to the stability and longevity of the product.
5. Operating Instructions
The VASAGLE Dining Table Set is designed for everyday use in dining areas, kitchens, or living rooms. Its compact design allows for versatile placement.
- Seating: The set comfortably seats 4 individuals. The benches can be pulled out for use and easily pushed back under the table when not needed, optimizing space.
- Stability: Ensure the table and benches are stable before use. If any wobbling occurs, adjust the leveling feet located at the bottom of the legs.
- Movement: When moving the table or benches, lift them rather than dragging to prevent damage to the floor or the furniture itself.
6. Care and Maintenance
Proper care will extend the life and appearance of your dining set.
- Cleaning: Wipe the surfaces with a dry cloth. For stubborn marks, use a slightly damp cloth with a mild cleaner, then dry immediately. Avoid abrasive cleaners or harsh chemicals.
- Spills: Clean up spills promptly to prevent staining or damage to the engineered wood surface.
- Tighten Fasteners: Periodically check all screws and bolts and re-tighten them as necessary to maintain structural integrity and stability.
- Avoid Extreme Conditions: Do not expose the furniture to extreme temperatures, humidity, or direct sunlight for extended periods, as this can cause warping, fading, or cracking.
Image: A hand wiping water droplets from the heather greige engineered wood surface of the table with a grey cloth. This image demonstrates the recommended cleaning practice for liquid spills, emphasizing the importance of immediate cleanup to protect the surface.
7. Troubleshooting
If you encounter any issues with your dining set, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Table/Bench wobbles | Uneven floor; loose fasteners. | Adjust the leveling feet on the bottom of the legs. Check and tighten all assembly screws. |
| Parts do not align during assembly | Incorrect orientation of parts; screws not fully loosened. | Review the assembly instructions carefully. Ensure parts are oriented as shown in diagrams. Loosen all screws slightly, adjust alignment, then re-tighten. |
| Scratches on surface | Sharp objects; abrasive cleaning. | Use placemats or coasters to protect the surface. Avoid dragging objects across the table. Use only soft cloths for cleaning. |
| Missing hardware or parts | Packaging error. | Contact VASAGLE customer support with your model number and a description of the missing parts. |
8. Specifications
- Model: UKDT070B02
- Brand: VASAGLE
- Color: Heather Greige + Ink Black
- Material: Alloy Steel, Engineered Wood
- Table Dimensions (L x W x H): 43.3" x 27.6" x 29.5" (110 x 70 x 75 cm)
- Bench Dimensions (L x W x H): 38.2" x 11.8" x 19.7" (97 x 30 x 50 cm)
- Item Weight: 60.6 lbs (27.5 kg)
- Maximum Load Capacity (Table): 220 lbs (100 kg)
- Maximum Load Capacity (Each Bench): 220 lbs (100 kg)
- Assembly: Required (tools and instructions included)
- Product Care: Wipe with dry cloth
9. Warranty and Support
For warranty information, missing parts, or any product-related inquiries, please contact VASAGLE customer support. Keep your purchase receipt and model number (UKDT070B02) handy for faster service.
Customer Support: Refer to the contact information provided with your purchase or visit the official VASAGLE website.
Return Policy: This product is eligible for a 30-day easy return policy. Please refer to your retailer's return guidelines for details.