VASAGLE Lift Top Coffee Table

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your new VASAGLE Lift Top Coffee Table. Designed for versatility and storage, this coffee table features a lifting tabletop, hidden compartments, and drawers, making it a functional addition to any living space. Please read this manual thoroughly before assembly and use to ensure proper setup and longevity of your product.

Figure 1: VASAGLE Lift Top Coffee Table in use, with the tabletop raised to a comfortable height for working.

Safety Information

Please observe the following safety guidelines to prevent injury or damage to the product:

• Do not place overweight objects on the coffee table. The maximum weight recommendation is 300 pounds (136 kg).
• Ensure all screws and fasteners are securely tightened during assembly and periodically check for looseness.
• Keep small parts and packaging materials away from children to prevent choking hazards.
• Avoid sudden impacts or excessive force on the lift-top mechanism.
• Do not allow children to play on or around the lift-top mechanism to prevent finger pinching.

Package Contents

Verify that all components are present before beginning assembly:

• 1 x Lift-Top Coffee Table (disassembled components)
• 1 x Accessory Kit (screws, bolts, tools)
• 1 x Instructions Manual (this document)

If any parts are missing or damaged, please contact customer support.

Assembly Instructions

Assembly typically takes approximately 30 minutes with assistance. A screwdriver is recommended for assembly.

1. Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a clean, soft surface to prevent scratches. Identify each part using the labels provided in the accessory kit and the assembly diagram.
2. Assemble the Base Frame: Connect the metal frame components as per the diagram. Ensure all connections are firm but do not fully tighten screws until the entire frame is assembled.
3. Install Drawers and Shelves: Slide the drawer rails into place and assemble the drawers. Insert the bottom shelf into the designated slots.
4. Attach Lift-Top Mechanism: Secure the lift-top mechanism to the main frame. Pay close attention to the orientation.
5. Attach Tabletop (Orientation Options): The tabletop can be assembled in two ways to suit your preference:
   • Option A (Towards Drawers): The lift-top opens towards the side with the drawers.
   • Option B (Away from Drawers): The lift-top opens away from the side with the drawers.

   Refer to the specific diagrams in your included paper instructions for detailed steps on each option. Ensure the tabletop is securely fastened to the lift mechanism.

   

   Figure 2: Two ways to assemble the tabletop, allowing it to lift towards or away from the drawers.
6. Final Tightening: Once all components are in place and aligned, fully tighten all screws and fasteners.

Note: Some users have reported that the instructions can be small or unclear. Take your time, carefully review each step, and ensure hole alignments match the diagrams. Contact customer support if you encounter significant difficulties.

Operating Instructions

Lift-Top Functionality:

The tabletop is designed to lift and extend forward, providing a comfortable surface for working, dining, or other activities while seated on your couch. To lift, gently pull the front edge of the tabletop upwards. The spring mechanism will assist in raising it smoothly. To lower, push the tabletop down firmly and evenly until it latches back into its closed position.

Figure 3: The coffee table's versatility, functioning as both a standard coffee table and a raised surface for dining or work.

Storage Compartments:

The table features multiple storage options:

• Hidden Compartments: Beneath the lift-top, there are three hidden compartments ideal for storing blankets, books, or other items you wish to keep out of sight.
• Drawers: Two spacious drawers are located on the lower level, suitable for board games, coasters, or other living room essentials.
• Open Shelf: An open shelf provides easy access storage for remotes, magazines, or decorative items.

Figure 4: Overview of the table's ample storage capacity, including hidden compartments, drawers, and an open shelf.

Maintenance

To ensure the longevity and appearance of your coffee table, follow these maintenance tips:

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
• Spills: Clean up spills immediately to prevent staining, especially on the rustic brown finish.
• Mechanism Care: Periodically check the lift-top mechanism for smooth operation. If it becomes stiff, a small amount of silicone lubricant can be applied to the moving parts (avoiding wood surfaces).
• Stability Check: Regularly inspect all screws and connections to ensure they remain tight. Re-tighten if necessary.
• Weight Distribution: Distribute weight evenly on the tabletop and shelves. Do not exceed the maximum weight capacity.

Troubleshooting

If you encounter issues with your coffee table, refer to the following common solutions:

Specifications

Figure 5: Detailed dimensions of the coffee table, including maximum static load capacity.

Warranty and Support

For any questions, concerns, or issues regarding your VASAGLE Lift Top Coffee Table, please contact customer support. Information regarding returns and support can typically be found on the retailer's website or through the provided contact details in your product packaging.

• Returns: This product is eligible for 30-day easy returns. Please refer to the retailer's return policy for specific conditions.
• Customer Support: For assistance, please visit the VASAGLE Store on Amazon or contact the seller directly.