VONZOY 3-Piece Patio Furniture Set Instruction Manual

1. Safety Information

Please read all safety instructions before assembly and use. Failure to follow these instructions may result in injury or damage to the product.

• Do not expose the furniture set to excessively high heat sources.
• Exercise caution with sharp edges and small parts during the assembly process.
• Ensure the furniture is stable and level before use to prevent tipping.
• Avoid using the furniture in wet conditions to prevent damage and ensure user safety.
• Keep children and pets away from the assembly area.

2. Product Overview

The VONZOY 3-Piece Patio Furniture Set includes two swivel glider rocker chairs and one tempered glass top side table, designed for outdoor use.

Image: The complete VONZOY 3-Piece Patio Furniture Set, featuring two chairs and a table.

Image: Two individuals comfortably seated in the VONZOY patio chairs next to a small table, positioned by a pool.

3. Components List

Before beginning assembly, ensure all parts are present and undamaged. Refer to the packaging for a detailed list of components and hardware. A typical set includes:

• 2 x Swivel Glider Rocker Chairs (unassembled)
• 1 x Side Table with Tempered Glass Top (unassembled)
• Seat and Back Cushions
• Assembly Hardware (screws, washers, Allen wrench)

Image: A diagram illustrating the dimensions and key components of both the patio chair and the side table.

4. Assembly Instructions

4.1 Before You Begin

• Unpack all components and lay them out on a soft, clean surface (e.g., a blanket or cardboard) to prevent scratches.
• Verify that all parts and hardware listed in your package contents are present.
• Do not fully tighten any screws until all components are loosely assembled and properly aligned. This prevents misalignment and stripped threads.
• Assembly is generally easier and safer with two people.

4.2 Step-by-Step Assembly

Follow the detailed assembly diagram provided in your product packaging. General steps include:

1. Attach the chair base to the seat frame using the specified hardware.
2. Connect the backrest to the seat frame and armrests.
3. Assemble the side table frame, then carefully place the tempered glass top into position.
4. Once all parts are loosely connected, gradually tighten all screws evenly until secure.
5. Place the seat and back cushions onto the chairs.

Image: A visual representation demonstrating the 360-degree swivel and smooth gliding motion of the patio chair.

Image: A detailed view highlighting the widened armrests for comfort and the stable design to prevent tipping.

5. Operating Instructions

5.1 Swivel and Glider Function

The chairs are designed with a sturdy metal frame and a round base that allows for a smooth 360-degree swivel and a gentle back-and-forth gliding motion. Use these features gently and avoid sudden, forceful movements.

5.2 Cushion Usage

Place the high-density sponge cushions on the chair seats and backrests for optimal comfort. The back cushions are equipped with fix ties to secure them to the chair frame, preventing displacement during windy conditions.

6. Maintenance

6.1 Cleaning

• Wicker and Frame: Wipe the wicker and metal frame with a dry cloth regularly to remove dust and debris. For deeper cleaning, use a mild soap solution and a soft cloth, then rinse thoroughly with water and dry completely to prevent water spots or rust.
• Tempered Glass Tabletop: Clean the glass tabletop with a glass cleaner and a soft, lint-free cloth. Avoid abrasive cleaners or scouring pads that could scratch the surface.
• Cushions: The cushions are made from waterproof fabric and are easy to clean. Spot clean with a mild soap and water solution. Allow cushions to air dry completely before storing or reusing. Do not machine wash or tumble dry.

6.2 Storage

During periods of harsh weather, heavy rain, snow, or prolonged non-use, it is recommended to store the furniture in a dry, protected area or use high-quality outdoor furniture covers to protect it from the elements and extend its lifespan.

6.3 Hardware Check

Periodically inspect all bolts, screws, and connections to ensure they remain tight. Retighten any loose hardware as necessary to maintain the stability and safety of the furniture.

7. Troubleshooting

7.1 Common Issues and Solutions

• Wobbly Chair or Table: If the furniture feels unstable after assembly, slightly loosen all screws, gently press down on the item to ensure it sits evenly on the ground, then retighten all screws firmly.
• Misaligned Holes During Assembly: If screw holes do not align perfectly, try rotating the component or slightly loosening adjacent screws to allow for minor adjustments. Do not force screws, as this can damage threads or components.
• Stripped Screws: If a screw head becomes stripped during assembly, use a screw extractor tool to remove it. Contact customer service for replacement hardware if needed.
• Cushion Fading: While cushions are designed for outdoor use, prolonged direct exposure to sunlight can cause some fading over time. To minimize this, rotate cushions regularly or store them in a shaded area when not in use.

8. Specifications

9. Warranty and Support

9.1 Warranty Information

This product is backed by VONZOY's best-in-class warranties. For specific details regarding your product's warranty coverage, please refer to the documentation included with your purchase or contact customer service directly.

9.2 Customer Support

Should you have any questions, require assistance with assembly, or need to report a missing or damaged part, please do not hesitate to contact the VONZOY customer service team. Our team is committed to providing support and aims to respond to inquiries within 24 hours.

Contact information can typically be found on the product packaging or the official VONZOY website.