1. Introduction
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your SystemBuild Evolution Farmington 31.5" Wide Storage Cabinet. Designed with a rustic barn-style aesthetic and finished in Reclaimed Oak, this cabinet offers a practical and stylish storage solution for various household items.
The cabinet features two doors that open to reveal four spacious shelves, two of which are adjustable, allowing for flexible storage configurations. A wall anchor kit is included to ensure stability and safety. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Figure 1.1: Front view of the SystemBuild Evolution Farmington Storage Cabinet.
2. Setup and Assembly
The SystemBuild Evolution Farmington Storage Cabinet is shipped flat-packed and requires assembly. For optimal safety and ease of assembly, it is recommended that two adults perform the assembly process.
2.1 Unpacking and Inspection
- Carefully unpack all components from the packaging.
- Verify that all parts listed in the assembly instructions (typically included in the box) are present and undamaged.
- Lay out all hardware and panels on a clean, soft surface to prevent scratches.
2.2 Assembly Steps
Refer to the detailed assembly manual provided within the product packaging for step-by-step instructions. General steps typically include:
- Attaching the base and side panels.
- Installing the fixed and adjustable shelves.
- Mounting the back panel.
- Attaching the doors and hardware.
- Securing the cabinet with the included wall anchor kit.
Figure 2.1: The assembled cabinet in a typical home environment.
2.3 Wall Anchor Installation
A wall anchor kit is provided for enhanced safety and stability, especially in homes with children or pets. It is crucial to install this kit to prevent tip-over accidents. The bracket mounts to the back of the cabinet and into a wall stud. If a stud is not available at the desired location, use the provided drywall screws.
Important: Always secure the cabinet to a wall using the provided anti-tip hardware. Failure to do so can result in serious injury or death.
Figure 2.2: Rear view of the cabinet, indicating the area for wall anchor attachment.
3. Operating Instructions
The SystemBuild Evolution Farmington Storage Cabinet is designed for versatile storage in various rooms such as living rooms, home offices, or utility areas.
3.1 Storage Capacity and Organization
- Open the two front doors to access the interior storage space.
- The cabinet features four shelves: two fixed and two adjustable.
- Adjustable shelves can be repositioned to accommodate items of varying heights. To adjust, remove the shelf, reposition the shelf pins to the desired height, and reinsert the shelf.
- Each adjustable shelf can hold up to 25 lbs. The fixed shelf holds up to 30 lbs.
- Ideal for storing office supplies, non-perishable foods, board games, pet supplies, linens, or other household items.
Figure 3.1: Interior view showcasing storage possibilities with items.
Figure 3.2: Interior view with empty shelves, demonstrating adjustable shelf positions.
3.2 Door Operation
- The cabinet features two flat panel doors with black handles.
- Gently pull the handles to open the doors. Ensure doors are fully closed when not in use to protect contents and maintain appearance.
Figure 3.3: Detail of the cabinet doors and handles.
4. Maintenance and Care
Proper care will help maintain the appearance and longevity of your SystemBuild Evolution Farmington Storage Cabinet.
4.1 Cleaning
- Wipe surfaces with a soft, damp cloth.
- Avoid using harsh chemicals, abrasive cleaners, or polishes, as these can damage the laminated finish.
- Promptly wipe up any spills to prevent staining or damage to the wood.
4.2 General Care
- Avoid placing hot items directly on the surface.
- Do not overload shelves beyond their stated weight limits (25 lbs for adjustable, 30 lbs for fixed).
- Periodically check all hardware and connections to ensure they remain tight. Retighten if necessary.
- Ensure the wall anchor remains securely fastened to the wall and cabinet.
Figure 4.1: Detail of the Reclaimed Oak finish, highlighting the texture to be cared for.
5. Troubleshooting
This section addresses common issues you might encounter with your storage cabinet.
| Problem | Possible Cause | Solution |
|---|
| Cabinet feels wobbly or unstable. | - Not properly secured to the wall.
- Uneven floor surface.
- Loose assembly hardware.
| - Ensure the wall anchor kit is correctly installed into a wall stud or with appropriate drywall anchors.
- Place shims under the base of the cabinet to level it.
- Retighten all assembly screws and bolts.
|
| Doors do not close properly or are misaligned. | - Loose hinge screws.
- Cabinet not level.
- Obstruction inside the cabinet.
| - Adjust or tighten hinge screws.
- Level the cabinet as described above.
- Remove any items blocking the door's path.
|
| Shelf bowing or sagging. | | - Reduce the weight on the shelf. Ensure items do not exceed the 25 lbs (adjustable) or 30 lbs (fixed) weight limit.
- Distribute weight evenly across the shelf.
|
6. Specifications
Key technical specifications for the SystemBuild Evolution Farmington 31.5" Wide Storage Cabinet:
| Feature | Detail |
|---|
| Model Name | Farmington |
| Model Number | 7532348COM |
| Brand | SystemBuild Evolution |
| Color | Reclaimed Oak |
| Product Dimensions (D x W x H) | 15.67"D x 31.5"W x 71.85"H |
| Item Weight | 92.4 pounds |
| Material | Laminated Engineered Wood and MDF |
| Number of Shelves | 4 (2 adjustable, 2 fixed) |
| Adjustable Shelf Weight Limit | 25 lbs each |
| Fixed Shelf Weight Limit | 30 lbs |
| Mounting Type | Wall Mount (with included anchor kit) / Freestanding |
| Assembly Required | Yes (by two adults recommended) |
| UPC | 029986913425 |
Figure 6.1: Detailed product dimensions.
7. Warranty and Support
7.1 Limited Warranty
The SystemBuild Evolution Farmington 31.5" Wide Storage Cabinet includes a 1-Year Limited Warranty. This warranty covers manufacturing defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
The warranty does not cover damage resulting from improper assembly, misuse, abuse, accidents, modifications, or normal wear and tear. For specific terms and conditions, please refer to the warranty documentation included with your product or contact customer support.
7.2 Customer Support
For assistance with assembly, missing parts, warranty claims, or any other inquiries regarding your SystemBuild Evolution product, please contact the manufacturer's customer support. Contact information is typically found in the assembly manual or on the manufacturer's official website.
You can also visit the SystemBuild Evolution Store on Amazon for more information and resources.
