1. Product Overview
This TouchUpDirect Preferred Package aerosol kit provides a comprehensive solution for repairing paint scratches and chips on your Ford vehicle with the YN/Z3/M6505/M6895 Silver Metallic paint code. The kit includes all necessary components for a durable and color-matched finish. Our paint is formulated to be environmentally friendly and offers UV resistance for longevity.
Image 1: Features of the TouchUpDirect Aerosol Spray Can. This image highlights the rotatable nozzle for smooth fan spray, environmentally friendly paint, color match guarantee, and that the product is proudly made in the USA. It also indicates suitability for deep and large car paint damage.
2. Kit Contents
The Preferred Package is designed to provide a complete solution for paint repair. Each kit contains the following items:
- Primer: Prepares the surface for optimal paint adhesion.
- Colorcoat: The exact match paint for your vehicle's color code.
- Clearcoat: Provides a protective, glossy finish and enhances durability.
- Wax & Grease Remover Wipe: For thorough surface cleaning before application.
Image 2: Contents of the Aerosol Preferred Kit, showing the Primer, Colorcoat, Clearcoat aerosol cans, and the Wax & Grease Remover Wipe.
3. Setup and Preparation
3.1. Locate Your Car Paint Color Code
Before starting, confirm your vehicle's paint color code. For Ford vehicles, this code is typically found on the manufacturer's label, often located on the driver's side door jamb, under the hood, or in the glove compartment. An example of a VIN is 1FMCU0J95KUA06351.
Image 3: Illustration showing typical locations for finding your car paint color code on a Ford vehicle, often on the door jamb label.
3.2. Surface Preparation
Proper surface preparation is crucial for a successful repair. Begin by thoroughly cleaning the area with soap and water to remove dirt and debris. Use the provided Wax & Grease Remover Wipe to ensure the surface is free of contaminants. If necessary, lightly sand the target area with fine-grit sandpaper to smooth out imperfections, then clean again. For deep scratches or bare metal, apply primer as directed in the application steps.
3.3. Test Color Match
Always test the Colorcoat on a discreet area or the included test card before applying it to your vehicle. This ensures the color match is accurate and allows you to become comfortable with the aerosol application technique.
4. Operating and Application Instructions
Follow these steps for optimal results:
- Test Color: Use the provided test card to verify the paint matches your car's color. Practice your spray technique on this card.
- Surface Preparation: Clean the target area with soap and water. Use the Wax & Grease Remover Wipe. If needed, sand the area and re-clean. For deep scratches or bare metal, apply a thin, even coat of Primer and allow it to dry completely according to instructions.
- Paint (Colorcoat): Apply several thin, even coats of the Colorcoat, allowing appropriate drying time between coats. Avoid applying a single thick coat, as this can lead to drips and uneven coverage.
- Clearcoat: Once the Colorcoat has dried to a dull finish (typically 30-60 minutes, depending on conditions), apply several thin, even coats of Clearcoat. The Clearcoat is essential for protecting the paint and achieving a professional-grade, glossy finish. Allow the Clearcoat to dry completely before proceeding.
- Polish: After the Clearcoat has fully cured (refer to product instructions for specific cure times, usually 24-48 hours), you may gently polish the area to blend the repair and enhance the shine.
Paint Coverage Guidelines:
- Hoods/Trunk Lids: 3-4 cans
- Bumpers: 2-3 cans
- Mirrors: 1 can
Image 4: Visual guide to the four-step application process: 1. Test Color, 2. Surface Prep, 3. Paint (Colorcoat and Clearcoat), 4. Polish.
Image 5: Before and After comparison demonstrating the effectiveness of the touch up paint kit on a scratched vehicle surface.
5. Maintenance
To maintain the repaired area and the overall finish of your vehicle, regular cleaning and waxing are recommended. The Clearcoat provides a protective layer, but proper care will extend its longevity and appearance. Avoid harsh chemicals or abrasive cleaning materials on the repaired area, especially during the initial curing period.
6. Troubleshooting
6.1. Color Match Guarantee
TouchUpDirect offers a Color Match Guarantee. If you experience any issues with the color matching your vehicle, ensure you have followed all preparation and application steps, including testing the color. If discrepancies persist, please contact TouchUpDirect customer support for assistance.
6.2. Common Issues
- Uneven Finish: Often caused by applying coats too thickly or unevenly. Ensure thin, even coats and proper drying time.
- Poor Adhesion: Usually due to inadequate surface preparation. Ensure the area is clean, dry, and free of wax or grease.
- Drips or Runs: Occur when too much paint is applied at once. Apply multiple thin coats instead of one heavy coat.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | TouchUpDirect |
| Model Number | 29945-A-PD |
| UPC | 680392427489 |
| Finish Type | Gloss |
| Size | 1 Ounce (Pack of 1) |
| Item Volume | 30 Fluid Ounces |
| Special Feature | UV Resistant |
| Unit Count | 1.0 Ounce |
| Specific Uses For Product | Exterior |
| Indoor/Outdoor Usage | Outdoor |
| Item Form | Aerosol |
| Included Components | Primer, Colorcoat, Clearcoat Aerosol spray can, Wax & Grease Remover Wipe |
| Coverage | Partial |
| Style | Aerosol Spray - Preferred Kit |
8. Warranty Information
Specific warranty details for TouchUpDirect products are subject to change. For the most current and detailed warranty information, please refer to the official TouchUpDirect website or contact their customer support directly.
9. Support and Contact
If you have any questions, require further assistance, or need to address a color match issue, please contact TouchUpDirect customer support. You can typically find contact information on the official TouchUpDirect website: Visit the TouchUpDirect Store on Amazon.