HOFFREE HOGC-MAX303

HOFFREE HOGC-MAX303 LED Gaming Chair Instruction Manual

1. Introduction

Thank you for choosing the HOFFREE HOGC-MAX303 LED Gaming Chair. This manual provides detailed instructions for the assembly, operation, and maintenance of your new gaming chair. Please read this manual thoroughly before assembly and use to ensure proper function and safety. This chair is designed for comfort and an immersive experience, featuring LED lighting, Bluetooth speakers, and a massage function.

2. Safety Information

  • Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
  • Follow assembly instructions carefully. Improper assembly can lead to instability and injury.
  • Do not stand on the chair. Use the chair only for sitting.
  • Do not exceed the maximum weight recommendation of 400 pounds.
  • Keep children and pets away from the chair during assembly.
  • Avoid placing the chair near heat sources or in direct sunlight for prolonged periods to prevent material damage.
  • Regularly check all bolts and screws to ensure they are tight. Retighten as necessary.
  • Do not use abrasive cleaners or harsh chemicals on the chair's surfaces.
  • Ensure the power adapter for LED lights and massage function is connected to a suitable power source.

3. Package Contents

Before beginning assembly, verify that all components listed below are included in your package:

  • Chair Backrest
  • Seat Base with attached mechanism
  • Armrests (2)
  • Footrest Assembly
  • Star Base
  • Casters (5)
  • Gas Lift Cylinder
  • Gas Lift Cover
  • Lumbar Massage Pillow
  • Headrest Pillow
  • Hardware Pack (screws, washers, Allen wrench)
  • Power Adapter for LED/Massage
  • Remote Control for LED lights

If any parts are missing or damaged, please contact HOFFREE customer support.

4. Setup and Assembly

Please lay a thick cloth or packing cardboard on the floor to protect it during assembly. Follow the steps below for proper assembly.

  1. Attach Casters to Star Base: Insert the five casters into the holes at the end of each leg of the star base. Push firmly until they click into place.
  2. Install Gas Lift: Place the gas lift cylinder into the center hole of the star base. Cover it with the gas lift cover.
  3. Attach Mechanism to Seat Base: Align the seat mechanism with the pre-drilled holes on the underside of the seat base. Secure it using the provided screws. Ensure the 'FRONT' label on the mechanism faces the front of the seat.
  4. Attach Footrest: Secure the footrest frame to the designated points on the underside of the seat base using the provided screws. Ensure the footrest can slide in and out smoothly.
  5. Connect Seat to Gas Lift: Carefully place the assembled seat base onto the gas lift cylinder. Press down firmly to secure.
  6. Attach Armrests: Secure the armrests to the sides of the seat base using the provided screws. Ensure they are firmly attached.
  7. Attach Backrest: Align the backrest with the seat base and secure it using the provided screws.
  8. Install Headrest and Lumbar Pillows: Attach the headrest pillow to the top of the backrest using its straps. Position the lumbar massage pillow on the lower back area of the backrest, securing it with its straps.
  9. Connect Power: Connect the power cables for the LED lights and massage function to the provided power adapter.

Video: HOFFREE Big and Tall Gaming Chair Assembly Guide. This video demonstrates the step-by-step assembly process for the gaming chair, including attaching the base, seat, armrests, and backrest.

5. Operating Instructions

5.1 Chair Adjustments

  • Height Adjustment: Pull the lever located on the right side of the seat mechanism upwards while seated to lower the chair. Lift your weight off the seat while pulling the lever to raise the chair.
  • Recline Function: Pull the lever on the left side of the seat mechanism upwards to recline the backrest. Push the lever down to lock the backrest in your desired position. The chair reclines up to 155 degrees.
  • Footrest: Pull the footrest handle located under the seat to extend the footrest. Push it back in to retract.
  • Armrests: The linkage armrests adjust with the recline of the backrest, providing continuous support.

5.2 LED Lighting

The chair features LED flashing lights along its edges with multiple lighting modes.

  • Power On/Off: Use the provided remote control to turn the LED lights on or off.
  • Mode Selection: Cycle through 358 RGB modes using the remote control.
  • Brightness/Color Intensity: Adjust the brightness and color intensity of the LEDs using the remote.
Remote control for LED lights on HOFFREE gaming chair

Image: Remote control for LED lights. The remote allows for power, mode, speed, brightness, and color adjustments.

5.3 Bluetooth 5.3 Speakers

The chair is equipped with dual Bluetooth 5.3 speakers for an immersive audio experience.

  • Pairing: Turn on the Bluetooth function on your device (e.g., smartphone, tablet, PC with Bluetooth transmitter). Search for