Introduction
This manual provides essential information for the proper use and care of your EasyKeys replacement key for Yale Lock JE570. This key is designed for file cabinets, desks, and cubicles utilizing Yale Lock Key Series JE01 - JE1600, specifically code JE570. It is compatible with manufacturers such as Art Metal and Art Steel.
Setup and Key Code Identification
Before ordering or using your replacement key, it is crucial to correctly identify your lock code. The replacement key is custom-cut to match the specific code of your Yale lock.
Image Description: This diagram illustrates four common locations where you can find your lock code. These include directly on an existing key (e.g., 'FR322'), on the face of the lock cylinder itself (e.g., 'FR322'), on a label located inside or behind the lock mechanism (e.g., 'CODE: G38'), or on a label affixed to the cabinet or door near the lock (e.g., 'HF321').
Where to Find Your Lock Code:
- On the Key: The code may be stamped directly onto your existing key.
- On the Lock Face: The code can often be found engraved or printed on the visible face of the lock cylinder.
- On a Label Inside/Behind the Lock: For some locks, the code is on a label attached to the lock mechanism, often requiring the drawer or door to be open to view.
- On the Cabinet/Door Label: A label with the lock code might be present on the furniture itself, near the lock.
⚠ Important Notes:
- Order by Manufacturer: Lock codes are specific to the manufacturer. Ensure the manufacturer of your lock matches the product description (e.g., Yale Lock, Art Metal, Art Steel).
- Key Cuts Differ: Even if lock codes appear similar, the actual key cuts can vary significantly between different brands. Always verify compatibility.
Operating Instructions
- Insert Key: Gently insert the replacement key into the lock cylinder. Do not force the key.
- Turn Key: Rotate the key clockwise or counter-clockwise, depending on the lock mechanism, to engage or disengage the lock.
- Remove Key: Once the lock is operated, return the key to its original insertion position before removing it.
If the key does not turn smoothly, do not apply excessive force. Refer to the Troubleshooting section.
Maintenance
- Keep the key clean and free from dirt or debris.
- Store the key in a dry place to prevent corrosion.
- Avoid bending or damaging the key blade.
- If the lock mechanism becomes stiff, a small amount of graphite lubricant can be applied to the key and inserted into the lock.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Key does not insert fully. | Obstruction in lock cylinder; incorrect key. | Check for debris in the lock. Verify the key code matches your lock. |
| Key inserts but does not turn. | Incorrect key; stiff lock mechanism; internal lock damage. | Ensure the key code is correct. Apply graphite lubricant to the lock. If issues persist, the lock may require professional service. |
| Key is difficult to remove. | Key not fully returned to insertion position; minor misalignment. | Gently jiggle the key while returning it to the neutral position. Do not force. |
Specifications
- Brand: EasyKeys
- Model Number: JE570
- Lock Type: Cam
- Material: Brass
- Item Dimensions (L x W x H): 0.5 x 0.5 x 1 inches
- Item Weight: 4 ounces
- Special Feature: Custom Cut Key, Durable
- Compatible Lock Series: Yale Lock Key Series JE01 - JE1600
- Compatible Manufacturers: Art Metal, Art Steel
Warranty and Support
For warranty information or technical support regarding your EasyKeys replacement key, please contact EasyKeys Inc. USA directly. Refer to your purchase documentation for specific warranty terms and contact details.
You can visit the EasyKeys Store on Amazon for more information or to contact the seller.