Sewer Camera Battery User Manual

Introduction

This manual provides essential information for the proper use, setup, operation, and maintenance of your JQKJCAM 12V 4500mAh Sewer Camera Battery. This accessory is designed to be compatible with WP90A/WP90B, WP70A/WP70B, and 9600A/9600B series sewer camera products. Please ensure to verify battery compatibility with your specific sewer camera model before use.

Setup and Initial Charging

Before first use, ensure the battery is fully charged to achieve optimal performance and battery life.

Charging the Battery

• Connect the provided AC 100-240V DC 12.6V 1000MA charger to the 'CHARGE' port on the battery box.
• The battery features a power display function. Monitor the power indicator lights to determine the charge level.
• Charge promptly when the battery level is low. Avoid using the device while it is actively charging.
• A full charge typically provides 4 to 6 hours of continuous usage.

Image: Front view of the JQKJCAM 12V 4500mAh Sewer Camera Battery Box, showing the battery indicator lights and various ports.

Image: A detailed view of the battery box's power indicator lights (25%, 50%, 75%, 100%) and the LED adjustment knob, illustrating the battery's charge status and light control.

Operating Instructions

Connecting to Your Sewer Camera System

1. Ensure the battery box is turned OFF using the 'ON/OFF' switch.
2. Connect the sewer camera to the 'CAMERA' connecting port on the battery box.
3. Connect the sewer camera monitor/screen to the 'DC 12V' and 'VIDEL' ports as required by your specific camera system.
4. Once all connections are secure, turn the 'ON/OFF' switch to the ON position to power the system.
5. Use the 'LED' Knob to adjust the brightness of the sewer camera light as needed for optimal visibility.

Image: The battery box with yellow and black cables connected to its ports, demonstrating how external components like the monitor and camera are attached.

Compatibility

This borescope battery is specifically designed for compatibility with JQKJCAM 23mm/0.9in or 17mm/0.67in sewer camera kits, including models such as 9600A, 9600B, WP70A, WP70B, WP90A, and WP90B. Important: This battery is not compatible with 23mm/0.9in sewer cameras that feature a 512hz locator, WIFI, self-leveling, or 1080P capabilities.

Image: The JQKJCAM battery box integrated into a complete sewer camera inspection system, specifically compatible with WP90A and WP90B models, showing the monitor and cable reel.

Image: The JQKJCAM battery box connected to a 9600A/B series sewer camera system, illustrating its use with a different compatible model, including the monitor and cable reel.

Maintenance and Care

• Charging Practices: Always use the specified charger (AC 100-240V DC 12.6V 1000MA) for charging. Overcharging or using an incompatible charger can damage the battery and void the warranty.
• Battery Level: Charge the battery promptly when the power indicator shows a low level to prevent deep discharge, which can reduce battery lifespan.
• Storage: When not in use for extended periods, store the battery in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to store the battery with a partial charge (around 50%) rather than fully charged or fully depleted.
• Cleaning: Keep the battery box and its ports clean and free from dust or debris. Use a soft, dry cloth for cleaning. Avoid using liquid cleaners.
• Handling: Handle the battery box with care. Avoid dropping it or subjecting it to strong impacts, which can damage internal components.

Troubleshooting

If you encounter issues with your JQKJCAM Sewer Camera Battery, consider the following general troubleshooting steps:

• Battery Not Charging:
  • Ensure the charger is properly connected to both the battery box and a working power outlet.
  • Verify that the charger's indicator light (if any) is on.
  • Check for any visible damage to the charging cable or port.
• Short Operating Time:
  • Ensure the battery is fully charged before use.
  • Operating time can vary based on usage intensity (e.g., continuous LED light use).
  • Battery capacity naturally degrades over time with repeated charge cycles.
• No Power Output:
  • Confirm the 'ON/OFF' switch is in the ON position.
  • Check the battery indicator lights to ensure there is sufficient charge.
  • Verify all connections to the sewer camera system are secure and correct.

If problems persist, please refer to the Warranty and Support section for further assistance.

Specifications

Warranty and Support

For warranty information, technical support, or any inquiries regarding your JQKJCAM Sewer Camera Battery, please contact the manufacturer, Shenzhen Jiejing Technology Development Co., Ltd, or the seller directly through the platform where the product was purchased. Please retain your proof of purchase for warranty claims.

Visit the JQKJCAM Store for more products and information: JQKJCAM Official Store