ZBARK Android 13 10.25 inch Multimedia Player GPS Navigation Carplay for Lexus IS (2013-2019) - Knob Version Instruction Manual

1. Product Overview

The ZBARK Android 13 10.25 inch Multimedia Player is designed to enhance your driving experience in compatible Lexus IS models from 2013 to 2019. This unit features a 1920x720 Blue Ray touch screen, an 8-core processor, 4GB RAM, and 64GB ROM, providing a responsive and sensitive interface. It integrates seamlessly with your vehicle's existing systems, retaining OEM functions such as the original car radio, amplifier, joystick control, and rear-view camera with reverse trajectory.

Key features include built-in Wireless Carplay and Wireless Android Auto, eliminating the need for additional dongles. It supports both factory and aftermarket cameras, Bluetooth music streaming, and hands-free calling. This specific version is compatible with Lexus IS models equipped with the Knob Version mouse type.

Image: The ZBARK 10.25 inch display showcasing the Wireless Carplay and Android Auto interfaces, highlighting seamless smartphone integration.

2. Package Contents

Before beginning installation, please ensure all components are present:

• 10.25 inch Android Head Unit
• Wiring Harness (specific to your OEM mouse type)
• GPS Antenna
• USB Cables
• Auxiliary Input Cable
• Microphone
• Installation Tools (pry tools, screwdriver)

Image: A complete view of the ZBARK Multimedia Player components, including the main screen, various cables, and accessories.

3. Compatibility Check

This Android head unit is designed exclusively for 3rd generation Lexus IS models (2013-2019). It is crucial to verify your vehicle's mouse type. This version is only compatible with cars equipped with the Knob Version mouse.

If you are unsure about your car's mouse type, please send photos of your car dashboard to customer support for confirmation before proceeding with installation.

Image: A visual guide illustrating the compatible 'Knob Version' mouse type for Lexus IS models, essential for correct product selection.

4. Installation Guide

This section provides a general overview of the installation process. For detailed, step-by-step instructions, please refer to the official installation video.

4.1. Preparation

• Ensure the vehicle is turned off and the battery is disconnected.
• Gather all necessary tools, including pry tools and screwdrivers.

4.2. Disassembly

1. Carefully remove the trim panels around the existing display and climate control unit using a pry tool.
2. Unscrew and remove the original display and radio unit.
3. Disconnect all factory wiring harnesses from the original units.

4.3. Wiring Connections

1. Connect the provided wiring harness to the new Android head unit.
2. Connect the other end of the new wiring harness to the vehicle's factory wiring. Ensure all connections are secure.
3. Connect the GPS antenna, USB cables, auxiliary input cable, and microphone to the new unit. Route these cables appropriately to avoid interference.

4.4. Assembly

1. Mount the new Android head unit into the dashboard opening.
2. Reinstall the climate control unit and any other components removed during disassembly.
3. Carefully reattach all trim panels, ensuring they snap securely into place.

4.5. Installation Video Guide

For a visual walkthrough of the installation process, please watch the official ZBARK installation video:

5. Operating Instructions

5.1. Initial Power-On and Setup

1. After installation, reconnect the vehicle battery.
2. Start the vehicle. The ZBARK unit should power on automatically.
3. Follow any on-screen prompts for initial setup, such as language selection and time zone.

5.2. Wireless Carplay and Android Auto

The unit supports both Wireless Carplay and Wireless Android Auto. To connect:

1. Ensure Bluetooth and Wi-Fi are enabled on your smartphone.
2. On the ZBARK unit, navigate to the Carplay or Android Auto application.
3. Search for available devices on your phone and select the ZBARK unit's Bluetooth name (e.g., "CAR-8971").
4. Confirm the pairing code on both your phone and the unit.
5. Once Bluetooth is paired, the unit will prompt you to enable Carplay/Android Auto. Allow the connection.
6. After a successful Carplay/Android Auto connection, the Bluetooth connection to the ZBARK unit will disconnect, and the connection will be maintained via Wi-Fi.

5.3. Audio Output Configuration

To ensure audio from the ZBARK unit plays through your car's speakers:

1. On the ZBARK unit, navigate to the System settings and enable 'Use Car's BT Channel'. Confirm the reboot.
2. After the unit reboots, enter your original car system's settings.
3. Connect your phone to the original car's Bluetooth system (do not connect to the ZBARK unit's Bluetooth at this stage).
4. Select 'Bluetooth' as the audio source in your original car system.

5.4. GPS Navigation

The unit comes with built-in GPS navigation. Ensure the GPS antenna is properly installed for optimal signal reception. You can use pre-installed navigation apps or download others from the Google Play Store.

Image: The ZBARK display showing a detailed GPS navigation map, indicating the unit's integrated navigation capabilities.

5.5. Bluetooth Connectivity

Beyond Carplay/Android Auto, the unit supports direct Bluetooth connections for music and calls. Pair your phone via Bluetooth in the unit's settings to access these features.

Image: The ZBARK display showing a Bluetooth call interface, demonstrating hands-free communication functionality.

6. Specifications

7. Troubleshooting

If you encounter issues with your ZBARK Multimedia Player, please refer to the following common problems and solutions:

• No Sound: Ensure your phone is connected to the original car's Bluetooth and the car's audio source is set to Bluetooth. Refer to the 'Audio Output Configuration' in the Operating Instructions section.
• Lags or Glitches: Ensure the unit's software is up to date. Check for any conflicting applications or excessive background processes. A system reset may resolve persistent issues.
• Disconnects (Carplay/Android Auto): Verify a stable Wi-Fi connection between your phone and the unit. Ensure no other devices are interfering with the Wi-Fi signal. Re-pairing the device can often resolve intermittent disconnections.
• Backup Camera Delay: A slight delay (3-4 seconds) for the backup camera to appear is normal. If the delay is excessive or the camera does not appear, check all camera connections.

8. Warranty Information

The ZBARK Android 13 10.25 inch Multimedia Player comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

The warranty does not cover damage caused by improper installation, accidental damage, misuse, unauthorized modifications, or natural disasters. For warranty service, please contact ZBARK customer support.

9. Customer Support

For any questions, technical assistance, or warranty claims, please contact ZBARK customer support through the following channels:

• Amazon Message Box: Send a message directly to the seller via your Amazon order page.
• Email: support@zbark.com (example email, replace with actual if available)
• Website: www.zbark.com (example website, replace with actual if available)

Please provide your order number and a detailed description of your issue when contacting support to ensure a prompt resolution.