Boahaus Diana Vanity Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Boahaus Diana Vanity. This elegant vanity features a mirror with 11 lights, seven spacious drawers, crystal knobs, integrated USB-C, USB-A, and 110V power outlets, and a glass top with a jewelry organizer. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Image: The Boahaus Diana Vanity, fully assembled, showcasing its mirror with 11 lights, multiple drawers, and a clean white finish.

Important Safety Information

Please observe the following safety precautions to prevent injury or damage to the product:

• Always unplug the vanity from the power source before performing any assembly, disassembly, or maintenance.
• Exercise caution with sharp edges and potential pinch points during the assembly process.
• Do not use the vanity if any electrical components or lighting elements are damaged. Contact customer support for assistance.
• Children should always be supervised when near the vanity to prevent accidents.
• Due to the significant weight of the vanity (approximately 105 pounds), lift with care and seek assistance when moving or assembling heavy components.

Package Contents

Before beginning assembly, verify that all parts are present and undamaged. Refer to the packing list included with your product for a complete inventory. Key components include:

• Vanity Desk Frame (Engineered Wood)
• Mirror with 11 Light Bulbs
• 7 Drawers with Crystal Knobs
• Jewelry Organizer Insert
• Assembly Hardware (screws, cam locks, dowels, etc.)
• Power Cord for Lights and Outlets

Setup and Assembly

Assembly is required for this product. It is recommended that two adults assemble the vanity. Clear a spacious area and lay out all components before starting. Follow the numbered steps in the included assembly guide for detailed instructions. The general steps are outlined below:

1. Unpack and Identify Parts: Carefully remove all components from the packaging. Identify each part using the labels and the parts list in your separate assembly manual.
2. Assemble the Main Desk Frame: Connect the side panels to the top and bottom panels using the provided hardware. Ensure all connections are secure.
3. Install Drawer Slides: Attach the drawer slides to the interior of the desk frame and to the sides of each drawer box. Pay close attention to the orientation of the slides.
4. Assemble Drawers: Construct the seven drawers. Insert the jewelry organizer into the designated drawer. Attach the crystal knobs to each drawer front.
5. Attach the Mirror Unit: Securely fasten the mirror unit to the back of the vanity desk. Ensure it is centered and stable.
6. Install Light Bulbs: Carefully screw the 11 light bulbs into their sockets around the mirror frame.
7. Connect Electrical Components: Plug the power cord for the lights and integrated outlets into a standard 110V wall socket.
8. Insert Drawers: Gently slide the assembled drawers into their respective compartments.

Image: Front view of the Boahaus Diana Vanity, showing the desk structure and mirror frame before accessories are added.

Operating Instructions

Using the Lights

The vanity mirror is equipped with 11 Hollywood-style light bulbs. To operate the lights, ensure the vanity is plugged into a power outlet. Locate the power switch, typically on the side of the mirror frame or the power cord. Press the switch to turn the lights on or off. Some models may feature adjustable brightness or color temperature settings, which can be controlled via dedicated buttons or a touch sensor on the mirror.

Utilizing USB and Power Outlets

The vanity includes built-in USB-A, USB-C, and 110V power outlets for convenience. These ports are active when the vanity is plugged into a wall outlet. Use the USB ports to charge mobile devices and the 110V outlet for styling tools or other small electronics.

Image: Close-up view of the integrated USB-A, USB-C, and 110V power outlets on the side of the vanity, demonstrating their accessibility.

Drawer and Jewelry Organizer Use

The seven drawers provide ample storage for cosmetics, brushes, and accessories. The dedicated jewelry organizer insert helps keep smaller items neatly separated and protected.

Image: Top-down view of the Boahaus Diana Vanity with several drawers open, revealing the jewelry organizer insert and ample storage space for various beauty products.

Maintenance

Cleaning Instructions

To maintain the appearance and longevity of your vanity, wipe all surfaces with a dry, soft cloth. Avoid using abrasive cleaners, harsh chemicals, or excessive moisture, as these can damage the engineered wood finish and electrical components. For the glass top, use a standard glass cleaner applied to a cloth, then wipe the glass surface.

Light Bulb Replacement

If a light bulb needs replacement, ensure the vanity is unplugged. Carefully unscrew the old bulb and replace it with a new bulb of the same type and wattage. Refer to the original packaging or contact customer support for recommended replacement bulbs.

Troubleshooting

• Lights Not Turning On:
  • Ensure the power cord is securely plugged into both the vanity and a working wall outlet.
  • Check if the power switch on the vanity is in the "On" position.
  • Verify that all light bulbs are securely screwed into their sockets and are not burnt out. Replace any faulty bulbs.
  • Test the wall outlet with another device to confirm it is receiving power.
• USB Ports or 110V Outlet Not Working:
  • Confirm the vanity is properly plugged into a live wall outlet.
  • Ensure the device you are trying to charge or power is functioning correctly.
• Drawers Sticking or Not Sliding Smoothly:
  • Check that the drawer slides are correctly installed and aligned.
  • Ensure no objects are obstructing the drawer's path or the slides.
  • Verify that all screws securing the drawer slides are fully tightened and not interfering with the slide mechanism.
• Vanity Wobbles:
  • Ensure all assembly hardware is fully tightened.
  • Place the vanity on a level surface.
  • Consider securing the vanity to a wall using anti-tip hardware (if not included, consult a professional for safe installation).

Specifications

Image: Diagram illustrating the dimensions of the Boahaus Diana Vanity, including height, width, and depth measurements.

Warranty Information

This Boahaus Diana Vanity is covered by a 22-month limited manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific details regarding coverage and how to make a claim, refer to the warranty documentation included with your product or contact Boahaus customer support.

Customer Support

If you have any questions, require assistance with assembly, or encounter any issues not covered in the troubleshooting section, please contact Boahaus customer support. You can typically find contact information on the manufacturer's website or on the product packaging.

For more information about Boahaus products, visit the official Boahaus store: Boahaus Store on Amazon.