Battery Tender 600 AMP Lithium Jump Starter

Introduction

The Battery Tender 600 AMP Lithium Jump Starter is a compact and powerful emergency power solution designed to jump start 12-volt batteries in gas and diesel engines up to V6. This portable device also functions as a power bank, providing convenient charging for your electronic devices. Its robust design, combined with advanced safety features like spark-proof and reverse polarity protection, ensures reliable and safe operation.

Image: The Battery Tender 600 AMP Lithium Jump Starter unit with its attached smart alligator clips.

What's in the Box

• Battery Tender 600 AMP Lithium Jump Starter Unit
• Smart Alligator Clips
• Micro USB / Type C Charging Cable
• Soft Carrying Case

Safety Information

Please read and understand all safety information before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always wear eye protection when working with batteries.
• Ensure the jump starter is fully charged before use.
• Do not attempt to jump start a frozen battery.
• Do not connect the positive (+) and negative (-) clamps together.
• Keep the jump starter away from moisture and flammable materials.
• This device is designed for 12V lead-acid batteries only. Do not use on other battery types.
• Keep out of reach of children.
• The unit features spark-proof and reverse polarity protection. However, always ensure correct connection to battery terminals.

Setup: Initial Charging

Before first use, fully charge the Battery Tender Jump Starter.

1. Locate the USB-C input port on the jump starter unit.
2. Connect the provided Micro USB / Type C charging cable to the jump starter.
3. Connect the other end of the charging cable to a USB wall adapter (not included) or a powered USB port.
4. The LED indicators on the unit will illuminate to show charging progress. All LEDs will be solid when fully charged.
5. Charging typically takes a few hours. It is recommended to fully charge the unit every 3-6 months to maintain battery health.

Image: The compact Battery Tender Jump Starter fits conveniently in a vehicle's console or glove compartment.

Operating Instructions

Jump Starting a Vehicle

Ensure the jump starter is fully charged before attempting to jump start a vehicle.

1. Turn off the vehicle's ignition and all accessories (lights, radio, etc.).
2. Connect the red positive (+) clamp to the positive (+) terminal of the vehicle's battery.
3. Connect the black negative (-) clamp to the negative (-) terminal of the vehicle's battery.
   

   Image: Detailed diagram of the smart alligator clips, showing dimensions and proper color-coding for connection.

4. Once connected, the jump starter will perform a safety check. If the connection is correct, the "Ready to Jump Start" indicator will illuminate.
5. Start the vehicle's engine. If the engine does not start on the first attempt, wait at least 30 seconds before trying again. Do not crank for more than 3 seconds per attempt.
6. Once the vehicle starts, immediately disconnect the black negative (-) clamp first, then the red positive (+) clamp.
7. Store the jump starter and cables in the provided carrying case.

Image: A user demonstrating the connection of the jump starter to a vehicle's battery terminals.

Image: A closer view of the jump starter being connected, highlighting the ease of use and compact size.

Using as a Portable Power Bank

The jump starter features multiple USB output ports for charging electronic devices.

• Connect your device's USB charging cable to one of the jump starter's USB output ports (USB 2.4 AMP or USB 2 AMP quick charging ports, or USB-C).
• The jump starter will automatically begin charging your device.
• Monitor your device's charging status.

Using the LED Flashlight

The integrated LED flashlight provides illumination in low-light conditions and includes an SOS strobe function.

• Press and hold the power button on the unit to turn on the flashlight.
• Press the power button again to cycle through different light modes (e.g., solid, strobe, SOS).
• Press and hold the power button again to turn off the flashlight.

Maintenance

• Keep the unit clean and dry. Wipe with a soft, damp cloth if necessary.
• Store the jump starter in its soft carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.
• Recharge the unit every 3-6 months, even if not used, to maintain optimal battery life and readiness.
• Do not attempt to disassemble or modify the unit.

Troubleshooting

Specifications

Warranty and Support

This Battery Tender product comes with a 12-month warranty. For warranty claims, technical support, or customer service, please contact Battery Tender directly.

Visit the official Battery Tender website for the most up-to-date contact information and support resources: www.batterytender.com

Lifetime customer service is provided by Battery Tender.