PeakTrivol 8-Bar Electric Heated Towel Warmer

1. Introduction

Thank you for choosing the PeakTrivol 8-Bar Electric Heated Towel Warmer. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new towel warmer. Please read all instructions carefully before use and retain this manual for future reference.

Key Features:

• 304 Stainless Steel: Durable and corrosion-resistant construction.
• Fast & Even Heating: Quickly warms up to 8 towels with consistent, spa-like warmth.
• Premium 8-Bar Design: Ample space for drying and warming multiple towels.
• Smart Safety Timer: Built-in auto shut-off and temperature control for peace of mind and energy efficiency.
• Dual Installation Options: Choose between hardwired or plug-in setup.
• Matte Black Elegance: Modern finish to complement bathroom decor.

2. Safety Information

Please observe the following safety precautions to reduce the risk of fire, electric shock, or injury:

• Read all instructions before installing and using this appliance.
• Do not use near water, bathtubs, sinks, or any other container.
• Ensure the appliance is properly grounded.
• Installation must be done by a certified electrician if hardwiring.
• Do not immerse in water.
• Keep children away from the appliance.
• Unplug the appliance when not in use or before cleaning.
• Do not operate with a damaged cord or plug.

3. Package Contents

Verify that all components are present before beginning installation:

• Heated Towel Warmer Unit
• Mounting Brackets (4 pcs)
• Mounting Hardware (screws, anchors)
• Hardwired Cover Plate (for hardwired installation)
• Power Cord (for plug-in installation)
• Instruction Manual

4. Installation

The PeakTrivol Towel Warmer offers both hardwired and plug-in installation options. Choose the method that best suits your bathroom setup.

The towel warmer offers flexible installation with options for direct plug-in for convenience or hardwired for a concealed, seamless connection.

General Installation Steps:

1. Choose Location: Select a suitable wall location, ensuring it is within reach of a power source (outlet for plug-in, junction box for hardwired) and away from direct water spray.
2. Mark Drilling Points: Hold the towel warmer against the wall in the desired position. Use a level to ensure it is straight. Mark the locations for the mounting brackets.
3. Drill Holes: Drill pilot holes at the marked locations. Insert wall anchors if necessary.
4. Attach Mounting Brackets: Secure the mounting brackets to the wall using the provided screws.

Hardwired Installation:

For a concealed connection, hardwiring is recommended. This should be performed by a qualified electrician.

1. Turn off power at the circuit breaker.
2. Connect the towel warmer's wires (green for ground, white for neutral, black for live) to the corresponding wires in the junction box.
3. Secure the hardwired cover plate over the connections.
4. Mount the towel warmer onto the installed brackets, ensuring all connections are secure.

Plug-in Installation:

For easy setup, use the plug-in option.

1. Ensure the power cord is routed safely and can reach a grounded electrical outlet.
2. Mount the towel warmer onto the installed brackets.
3. Plug the power cord into a standard 120V grounded outlet.

5. Operating Instructions

Your PeakTrivol Towel Warmer features an intuitive control panel for easy operation.

The digital display on the towel warmer allows for precise temperature control, ensuring towels are warmed to a comfortable and safe level.

The intuitive control panel features a long press for power on/off, short press to adjust the timer (1-24 hours or 'OH' for always-on), and short press to increase temperature (115-155°F).

Power On/Off:

• To Turn On: Long press the power button (usually indicated by a circle with a vertical line) for 2 seconds. The display will light up.
• To Turn Off: Long press the power button for 2 seconds. The display will turn off.

Adjusting Temperature:

• Once powered on, short press the temperature button (usually indicated by a thermometer icon) to cycle through temperature settings.
• Temperature can be adjusted from 115°F to 155°F in 10°F increments.

Setting the Timer:

• Short press the timer button (usually indicated by a clock icon) to set the operating duration.
• The timer can be set from 1 to 24 hours in 1-hour increments.
• Select 'OH' for continuous operation (always-on).

6. Maintenance

To ensure the longevity and optimal performance of your towel warmer, follow these maintenance guidelines:

• Cleaning: Disconnect power before cleaning. Wipe the surface with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals.
• Regular Inspection: Periodically check the power cord and connections for any signs of damage. If damage is found, discontinue use and contact customer support.
• Avoid Overloading: Do not place excessive weight on the towel warmer or hang more towels than recommended (up to 8 towels).

7. Troubleshooting

If you encounter issues with your towel warmer, refer to the following common problems and solutions:

• No Heat/Power:
  • Check if the power cord is securely plugged into a working outlet (for plug-in models).
  • Verify that the circuit breaker has not tripped (for hardwired models).
  • Ensure the power button has been long-pressed to turn the unit on.
• Uneven Heating:
  • Ensure towels are spread evenly across the bars and not bunched up.
  • Allow sufficient time for the unit to reach the set temperature.
• Unit Overheating:
  • The smart safety timer and temperature control should prevent overheating. If the unit feels excessively hot, immediately turn it off and unplug it (or turn off the breaker). Contact customer support.

For issues not listed here, please contact PeakTrivol customer support.

8. Specifications

Detailed dimensions for the Matte Black Electric Towel Warmer: 35.43"L x 25.19"W x 4.52"H. It features 8 bars, operates at 120V, 160W, and has an IP34 splash-proof rating.

Constructed from durable 304 stainless steel, the towel warmer is built for longevity and features an IP34 water-resistant rating for safe bathroom use.

9. Warranty and Support

The PeakTrivol 8-Bar Electric Heated Towel Warmer comes with a 2-Year Warranty from the date of purchase. This warranty covers manufacturing defects and ensures reliable performance under normal use.

For warranty claims, technical support, or any questions regarding your product, please contact PeakTrivol customer service through the retailer where the product was purchased or visit the official PeakTrivol website.