GOFLAME 5-Piece Dining Table Set

Introduction

Thank you for choosing the GOFLAME 5-Piece Dining Table Set. This manual provides essential information for the safe assembly, proper use, and maintenance of your new dining set. Please read these instructions carefully before assembly and retain them for future reference.

Safety Information

• Always assemble the product on a soft, clean surface to prevent scratches.
• Ensure all screws and bolts are securely tightened before use. Periodically check and re-tighten as necessary.
• Do not stand on the table or chairs.
• Keep small parts away from children during assembly to prevent choking hazards.
• Distribute weight evenly on the table surface. Do not exceed the maximum weight capacity.
• Avoid placing hot items directly on the table surface without protection.
• Use caution when moving the assembled set to prevent damage or injury.

Package Contents

Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

Image: Included components - 1 Dining Table and 4 Chairs.

• 1 x Dining Table
• 4 x Chairs
• 1 x Instruction Manual (this document)
• Hardware Pack (screws, bolts, Allen wrench)

Setup and Assembly

Assembly typically requires two adults. Please follow the steps carefully.

Tools Required (Not Included)

• Phillips Head Screwdriver (for some screws, if applicable)

Assembly Steps

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent damage. Identify each component using the parts list.
2. Assemble Chairs:
   • Attach the chair backrest to the chair frame using the provided screws.
   • Attach the chair seat to the chair frame, ensuring all holes align.
   • Secure all connections with the appropriate hardware and tighten using the Allen wrench. Do not overtighten until all parts are loosely connected.
   • Once all parts are in place, fully tighten all screws.
3. Assemble Table:
   • Attach the table legs to the tabletop using the provided screws and hardware. Ensure the legs are oriented correctly.
   • Secure all connections with the appropriate hardware and tighten using the Allen wrench. Do not overtighten until all parts are loosely connected.
   • Once all parts are in place, fully tighten all screws.
4. Final Check: Ensure all screws are tight and the table and chairs are stable before use.

Operating Instructions (Usage)

The GOFLAME 5-Piece Dining Table Set is designed for dining, working, studying, or other household activities. Its compact design allows for efficient use of space.

Image: Space-saving design with chairs stored under the table.

• Space-Saving Design: When not in use, the chairs can be neatly tucked under the table to maximize floor space in smaller rooms or apartments.
• Versatile Layouts: The individual chairs and table allow for flexible arrangements to suit various room layouts and occasions.
• Ergonomic Backrest: The chairs feature an ergonomically designed backrest for comfortable support during prolonged sitting.
• Non-slip Pads: The legs of both the table and chairs are equipped with non-slip pads to protect your floor from scratches and ensure stability.

Image: Versatile arrangements for multiple scenes.

Maintenance

Proper care will extend the life and appearance of your dining set.

Image: Easy-to-clean MDF board with smooth round edges.

• Cleaning: Wipe the table and chair surfaces with a dry cloth. For spills, use a slightly damp cloth and dry immediately. Avoid harsh chemicals or abrasive cleaners.
• Protection: Use coasters or placemats to protect the tabletop from heat, moisture, and scratches.
• Inspection: Periodically check all screws and bolts to ensure they remain tight. Re-tighten if necessary to maintain stability.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight may cause fading or damage to the finish.

Troubleshooting

If you encounter any issues with your dining set, refer to the following common problems and solutions:

• Wobbly Table/Chairs:
  • Ensure all screws and bolts are fully tightened.
  • Check that the product is placed on a level surface.
  • Verify that all parts are assembled correctly according to the instructions.
• Missing Parts/Damaged Components:
  • Carefully re-check the packaging for any overlooked items.
  • Contact GOFLAME customer support with your purchase details and a description of the missing or damaged part.
• Difficulty Aligning Holes During Assembly:
  • Do not fully tighten any screws until all parts are loosely connected. This allows for minor adjustments.
  • Ensure you are using the correct hardware for each connection point.

Specifications

Image: Product dimensions and weight capacities.

Warranty Information

GOFLAME products are manufactured with quality and durability in mind. While specific warranty terms may vary, GOFLAME typically offers a limited warranty against manufacturing defects. Please retain your proof of purchase for any warranty claims. For detailed warranty information, refer to the documentation included with your purchase or contact GOFLAME customer support.

Customer Support

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact GOFLAME customer support. Have your model number (B0CTJRBC2B) and purchase information ready for faster service.

For the most up-to-date contact information, please visit the official GOFLAME website or refer to your purchase receipt.