Product Overview
The EDISHINE LED Corner Floor Lamp (Model HFLCB3B) is a modern, minimalist lighting solution designed to enhance the ambiance of your living space. This 57.5-inch tall lamp features dimmable 3000K warm white light and is controlled by an RF-433 remote, offering convenience and customizable brightness levels. Its slim design makes it ideal for corners, saving space while providing effective illumination.
Image: The EDISHINE LED Corner Floor Lamp providing warm ambient light in a room, with its remote control visible.
Package Contents
Please ensure all components are present before assembly.
- LED Corner Floor Lamp (Main Pole and Base)
- RF-433 Remote Control
- Power Adapter
- User Manual (this document)
Setup and Assembly
Follow these steps to assemble your EDISHINE LED Corner Floor Lamp:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface.
- Attach Lamp Pole to Base: Screw the main lamp pole securely onto the heavy metal anti-tipping base. Ensure it is tightened to prevent wobbling.
- Connect Power Adapter: Connect the power adapter to the lamp's power input.
- Plug into Outlet: Plug the power adapter into a standard electrical outlet.
- Pair Remote Control (if necessary): If the remote does not immediately control the lamp, plug in the lamp and within 10 seconds, press and hold the ON/OFF button on the remote until the lamp responds.
Image: Dimensions of the lamp (57.5 inches tall, 7.9-inch base diameter) and remote control (3.5 x 1.6 x 0.6 inches).
Operating Instructions
Using the Remote Control
The RF-433 remote control allows for convenient operation from up to 49 feet away. Ensure the remote has working batteries (included).
- ON/OFF Button: Press to turn the lamp on or off.
- Brightness + Button: Increases the brightness level.
- Brightness - Button: Decreases the brightness level.
- Night Light Mode Button: Activates the night light mode, which is 30% of the normal brightness.
The lamp features a memory function that remembers your last brightness setting when turned off and on again.
Image: The lamp demonstrating its dimmable feature, showing different brightness levels from warm to bright.
Image: Detailed view of the remote control buttons and their functions.
Using the Foot Step Switch
The lamp also includes a foot step switch for basic control:
- Short Press: Turns the lamp ON/OFF.
- Long Press: Adjusts the brightness from 10% to 100%.
Image: Demonstrating the foot step switch for turning the lamp on/off and adjusting brightness.
Maintenance
To ensure the longevity and optimal performance of your EDISHINE LED Corner Floor Lamp, follow these maintenance guidelines:
- Cleaning: Disconnect the lamp from the power source before cleaning. Use a soft, dry cloth to wipe down the lamp pole and base. Avoid abrasive cleaners or solvents that could damage the finish.
- Bulb Replacement: This lamp uses integrated LED lighting and does not require bulb replacement. The LEDs have a lifespan of over 30,000 hours under normal use.
- Stability Check: Periodically check that the lamp pole is securely screwed into the base to maintain stability.
- Remote Control Batteries: Replace the remote control batteries when its range or responsiveness decreases.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power to the lamp; Power adapter not connected; Remote control batteries are dead or remote not paired. | Ensure the power adapter is securely plugged into both the lamp and a working electrical outlet. Check if the outlet has power. Replace remote batteries. Re-pair the remote by plugging in the lamp and pressing the ON/OFF button on the remote within 10 seconds. |
| Remote control is unresponsive or has short range. | Low or dead remote control batteries; Obstruction between remote and lamp; Remote not paired. | Replace the batteries in the remote control. Ensure there are no large obstructions. Re-pair the remote as described in the "Setup and Assembly" section. |
| Lamp is wobbly. | Lamp pole not securely attached to the base. | Tighten the lamp pole connection to the base. |
| Brightness adjustment not working. | Remote control issue; Foot switch not used correctly. | Check remote batteries and pairing. For foot switch, ensure a long press is used for brightness adjustment. |
Specifications
- Model: HFLCB3B
- Dimensions: 7.8"D x 7.8"W x 57.5"H (19.8 cm D x 19.8 cm W x 146 cm H)
- Item Weight: 5 Pounds (2.27 kg)
- Light Source Type: Integrated LED
- Color Temperature: 3000 Kelvin (Warm White)
- Brightness: 1100 Lumen
- Wattage: 19 watts
- Voltage: 120 Volts
- Control Method: RF-433 Remote Control, Foot Step Switch
- Material: Aluminum, Metal Base
- Lifespan: Over 30,000 hours
- Indoor/Outdoor Usage: Indoor Only
Warranty and Support
EDISHINE products are designed for quality and durability. For warranty information and customer support, please refer to the contact details provided on the product packaging or visit the official EDISHINE website. Please retain your proof of purchase for any warranty claims.
For further assistance, you may contact EDISHINE customer service through their official channels. Details can often be found on the EDISHINE Brand Store on Amazon.