Introduction
This manual provides essential information for the safe and effective use of your new onerbl AC Adapter, model XBATR525DC. This adapter is designed as a replacement power supply for Shark Detect Pro Cordless Stick Vacuum Cleaners, specifically compatible with models IW1000, IW1111, IW1111C, IW1111T6, and Li-ion battery XBATR525DC.
Please read this manual thoroughly before using the product and retain it for future reference.
Safety Information
To ensure safe operation and prevent damage, please observe the following precautions:
- Use the adapter only with compatible devices as specified.
- Do not expose the adapter to water, moisture, or extreme temperatures.
- Avoid dropping or subjecting the adapter to severe impact.
- Do not disassemble or attempt to repair the adapter. Refer all servicing to qualified personnel.
- Ensure the power outlet voltage matches the adapter's input specifications (AC 100-240V).
- Unplug the adapter from the power outlet when not in use for extended periods.
- Keep out of reach of children.
Image: The adapter features a smart chip for multiple protections, including short-circuit, over-voltage, and over-current protection, ensuring electrical safety.
Product Overview
Image: Front view of the onerbl AC Adapter, showing the main unit with its specifications label and the attached power cable with its DC output connector.
Image: Two views of the AC adapter, showing the front with input specifications and the side profile, highlighting its compact design.
Image: Diagram illustrating the physical dimensions of the AC adapter (2.6 inches length, 1.6 inches width, 1.2 inches height) and its cable length (76 inches).
Setup
- Verify Compatibility: Ensure your Shark vacuum cleaner model (IW1000, IW1111, IW1111C, IW1111T6) or battery (XBATR525DC) is listed as compatible with this adapter.
- Connect to Vacuum: Insert the DC output plug of the adapter firmly into the charging port of your Shark vacuum cleaner or its charging base.
- Connect to Power Outlet: Plug the AC input prongs of the adapter into a standard wall power outlet (AC 100-240V, 50/60Hz).
Image: The AC adapter plugged into a power strip, demonstrating a typical setup for charging a device, with a laptop in the background.
Operating Instructions
Once connected, the adapter will begin supplying power to your vacuum cleaner or charging its battery. The charging indicator on your vacuum cleaner (if available) will typically illuminate to show charging status.
- Allow sufficient time for the battery to fully charge as indicated by your vacuum cleaner's manual.
- The adapter is designed for continuous use during charging but should be unplugged when not actively charging or when the device is fully charged to conserve energy.
Maintenance
Proper maintenance ensures the longevity and performance of your AC adapter:
- Cleaning: Disconnect the adapter from power before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or solvents.
- Storage: Store the adapter in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly winding the cable to prevent damage.
- Cable Care: Regularly inspect the power cable and connector for any signs of wear, cuts, or damage. Do not use the adapter if the cable is damaged.
Image: An informational graphic highlighting the quality control and durable design of the adapter, showing internal copper wiring and a PVC jacket for the cable, and a close-up of the plug.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Adapter not supplying power. | Not properly plugged in; faulty outlet; damaged adapter/cable; incompatible device. | Ensure all connections are secure. Try a different power outlet. Inspect adapter and cable for damage. Verify device compatibility. |
| Vacuum not charging. | Adapter issue; vacuum battery issue; vacuum charging port issue. | Confirm adapter is working (e.g., by testing with another compatible device if possible). Consult your vacuum cleaner's manual for battery or charging port troubleshooting. |
| Adapter gets hot during use. | Normal operation (slight warmth); excessive load; poor ventilation; internal fault. | A slight warmth is normal. Ensure adequate ventilation around the adapter. If it becomes excessively hot or emits smoke/smell, unplug immediately and discontinue use. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | XBATR525DC |
| Input Voltage | AC 100-240V, 50/60Hz |
| Output | 18V 2350mAh (compatible with specified Shark models) |
| Plug Format | Type C (US Standard) |
| Cable Length | Approx. 76 inches (6.3 feet) |
| Protections | Over Voltage Protection, Over Heat Protection, Short-circuit Protection, Over-current Protection |
| Manufacturer | Shenzhen Waweis Technology Co., Ltd |
Image: An illustration showing the extended cord design, indicating a cable length of approximately 6.6 feet, providing flexibility in placement.
Warranty and Support
This product is manufactured by Shenzhen Waweis Technology Co., Ltd under the onerbl brand. For specific warranty details and support, please refer to the information provided by your retailer or contact the seller directly.
Common protection plans are available for purchase separately, offering extended coverage for your product. Please check with your point of purchase for details on available protection plans.
For technical assistance or inquiries, please contact the seller or manufacturer through the contact information provided with your purchase.
