IDEALHOUSE Round End Table (Model Y-BZ-001) Instruction Manual

1. Introduction

Thank you for choosing the IDEALHOUSE Round End Table, Model Y-BZ-001. This versatile 3-tier side table is designed to complement various living spaces, offering both functionality and aesthetic appeal. Its compact design makes it suitable for small spaces, serving as an end table, nightstand, or accent coffee table.

Key features include a sturdy alloy steel frame, high-grade engineered wood shelves with a rustic brown wood grain finish, and adjustable foot pads for stability. Each shelf is designed to support up to 150 lbs.

Image 1: The IDEALHOUSE Round End Table, fully assembled and styled in a living room setting.

2. Important Safety Information

CAUTION:

• Always assemble according to the provided instructions.
• Do not use on uneven surfaces without adjusting the footpads.
• Keep away from heat sources and liquids.
• Do not place heavy objects on the table that could cause it to tip over or collapse. Each layer supports up to 150 lbs.
• Rounded edges are designed for safety; however, exercise caution during use.

3. Setup and Assembly

The IDEALHOUSE Round End Table is designed for quick and straightforward assembly, typically taking about 15 minutes. All necessary parts and an installation tool are included.

Included Components:

• Tabletop (1)
• Middle Shelf (1)
• Bottom Shelf (1)
• Steel Frame Legs (4)
• Adjustable Foot Pads (4)
• Assembly Hardware (Screws, Washers)
• Installation Tool (Hex Key/Screwdriver)

Assembly Steps:

1. Unpack and Verify: Carefully unpack all components and compare them against the included parts list to ensure everything is present and undamaged.
2. Attach Foot Pads: Screw the adjustable foot pads into the bottom of the steel frame legs.
3. Assemble Frame: Connect the steel frame legs to the tabletop. It is recommended to loosely attach all screws first, then tighten them once all parts are aligned.
4. Install Shelves: Insert the middle and bottom shelves into the designated slots on the steel frame. Ensure they are level and secure before tightening any remaining screws.
5. Final Tightening: Once all components are in place and aligned, fully tighten all screws using the provided installation tool. Do not overtighten.
6. Adjust for Stability: Place the assembled table in its desired location. Adjust the foot pads as needed to ensure the table is stable and level on any surface.

Tip: While assembly is designed for one person, having a second person can assist with aligning components, especially the top and shelves, for easier and quicker setup. Ensure screws are only lightly tightened until all pieces are matched up with their respective holes.

Image 2: Product dimensions for the IDEALHOUSE Round End Table.

4. Operating Instructions

The IDEALHOUSE Round End Table is designed for indoor use. It provides three tiers of storage and display space.

• Weight Capacity: Each shelf can support a maximum weight of 150 pounds. Distribute weight evenly to maintain stability.
• Placement: Position the table on a flat, stable surface. Use the adjustable foot pads to compensate for minor unevenness in the floor.
• Intended Use: This table is suitable for holding lamps, books, decorative items, beverages, and other small household items.

5. Maintenance

Proper care will ensure the longevity and appearance of your IDEALHOUSE Round End Table.

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the wood grain finish.
• Spills: Although the shelves are designed to be waterproof and scratch-resistant, promptly wipe up any spills to prevent potential damage.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
• Environment: Avoid prolonged exposure to direct sunlight or extreme temperature changes, which can affect the material.

Image 3: Detailed view of the table's features, including the wood grain finish and adjustable feet.

6. Troubleshooting

• Table is wobbly:
  • Ensure all screws are fully tightened.
  • Adjust the foot pads on the bottom of the legs to level the table on uneven floors.
• Difficulty aligning parts during assembly:
  • Do not fully tighten any screws until all components are loosely assembled and aligned. This allows for minor adjustments.
  • If parts seem misaligned, double-check the instruction manual to ensure correct orientation of each piece.
  • Sometimes, applying gentle pressure or having a second person assist can help align stubborn pieces.
• Missing or damaged parts:
  • Refer to the "Customer Support" section for contact information to request replacement parts.

7. Specifications

8. Warranty Information

Specific warranty details for the IDEALHOUSE Round End Table (Model Y-BZ-001) are not provided in this manual. Please refer to your purchase documentation or contact IDEALHOUSE customer support for warranty information.

9. Customer Support

For any quality problems, missing parts, or assistance with assembly, please do not hesitate to contact IDEALHOUSE customer support. We are committed to providing the best solution and will respond within 24 hours.

Please visit the official IDEALHOUSE store or contact your retailer for support:

• IDEALHOUSE Store: Visit IDEALHOUSE on Amazon