Introduction
Thank you for choosing the DARKFANG 1450 Lumen Tactical Flashlight with Green Laser Beam Combo. This device is designed for reliability and performance, offering a powerful light source and a precise green laser for various tactical applications. Please read this manual thoroughly before use to ensure proper operation and safety.
Safety Information
WARNING: LASER RADIATION. AVOID DIRECT EYE EXPOSURE. This product emits Class IIIA laser radiation with a power output less than 5mW. Improper use or direct exposure to the laser beam can cause eye damage.
- Never look directly into the laser beam or flashlight.
- Do not point the laser at people or animals.
- Ensure the device is securely mounted before use.
- Keep out of reach of children.
- Use only the provided charging cable.
- Do not attempt to disassemble or modify the device.
Package Contents
Verify that all items are present in the package:
- Dual Head Flashlight & Green Laser Combo (Model DK-9059)
- User Manual
- Magnetic Charging Cable
- Coin-screw driver
Image: Contents of the DARKFANG tactical flashlight package.
Product Overview
The DARKFANG DK-9059 features a low-profile, full aluminum body designed for durability and ease of installation on Picatinny rails. It integrates a 1450 lumen flashlight with a Class IIIA green laser, offering multiple operating modes for diverse situations.
Image: Overview of the DARKFANG tactical flashlight with key dimensions and features.
Image: The DARKFANG tactical flashlight, highlighting its low-profile design.
Setup
Mounting on Picatinny Rail
- Identify the Picatinny rail section where you intend to mount the flashlight.
- Align the flashlight's mounting mechanism with the rail grooves.
- Use the provided coin-screw driver to tighten the mounting screws securely. Ensure the device is firmly attached and does not wobble.
Image: The flashlight mounted on a Picatinny rail, showcasing its slim and offset design.
Operating Instructions
The device features two independent switches for controlling the flashlight and laser functions. Both switches support momentary, steady on, and strobe modes.
Flashlight Operation
- Momentary On: Press and hold the flashlight switch. Release to turn off.
- Steady On/Off: Double-press the flashlight switch quickly to activate steady on. Double-press again to turn off.
- Strobe Mode: Triple-press the flashlight switch quickly to activate strobe. Triple-press again to return to the previous mode or turn off.
Laser Operation
- Momentary On: Press and hold the laser switch. Release to turn off.
- Steady On/Off: Double-press the laser switch quickly to activate steady on. Double-press again to turn off.
- Strobe Mode: Triple-press the laser switch quickly to activate strobe. Triple-press again to return to the previous mode or turn off.
Combined Operation
The flashlight and laser can be operated independently or simultaneously. Activating both will provide a combined light and laser output, designed to eliminate barrel shadows and focus light into a brighter hotspot.
Image: Various operating modes including light, laser, combined light and laser, and strobe.
Image: The dual-lens design eliminates shadows, providing a clear light and laser projection.
Charging
The DARKFANG DK-9059 features a built-in rechargeable battery and a magnetic charging port for convenience and weather resistance.
- Locate the magnetic charging port on the device.
- Connect the magnetic end of the provided charging cable to the port. The cable will snap into place.
- Connect the USB end of the charging cable to a standard USB power source (e.g., wall adapter, computer USB port).
- An indicator light on the device will show charging status (e.g., red for charging, green for fully charged).
- Charging time may vary. The device can be charged without dismounting it.
Image: Magnetic charging in progress, highlighting the rain-proof design.
Maintenance
- Cleaning: Wipe the device with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the flashlight in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: For optimal battery life, avoid fully discharging the battery frequently. Recharge the device regularly, especially if stored for extended periods.
- Water Resistance: The device is IPX6 waterproof, meaning it is protected against powerful water jets. Do not submerge the device.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Flashlight/Laser does not turn on. | Low battery. Incorrect operation. | Charge the device fully. Refer to "Operating Instructions" for correct button presses. |
| Light output is dim. | Low battery. Lens is dirty. | Charge the device fully. Clean the lens with a soft cloth. |
| Magnetic charging not working. | Cable not properly connected. Charging port is dirty. | Ensure magnetic cable is securely attached. Clean the charging port gently. |
| Device not holding a charge. | Battery degradation. | Contact customer support for warranty service if within the warranty period. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | DK-9059 |
| White Brightness | 1450 Lumens |
| Laser Type | Green Laser, Class IIIA, <5mW |
| Light Source Type | LED |
| Material | Aluminum |
| Power Source | Battery Powered (Built-in Lithium Polymer) |
| Runtime (Flashlight) | Approximately 1.2 hours (at max output) |
| Light Path Distance | Up to 240 meters (260 Yards) |
| Water Resistance Level | IPX6 (Weatherproof) |
| Mounting Type | Picatinny |
| Dimensions (L x W x H) | 2.97" x 4.98" x 0.66" |
Warranty and Support
Warranty: This product comes with a 2-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
Support: For any questions, concerns, or technical assistance, please contact DARKFANG customer support. Refer to the contact information provided with your purchase or visit the official DARKFANG website.