Outzone V318
Outzone V318 OBD2 Automobile Fault Diagnosis Instrument User Manual
Model: V318 | Brand: Outzone
Product Overview
The Outzone V318 is a comprehensive OBD2 automobile fault diagnosis instrument designed for gasoline cars. It supports nine standard OBDII/EOBD protocols, allowing for quick reading of vehicle fault information and parameters. This device helps in diagnosing engine issues and avoiding high maintenance costs.
Image: The Outzone V318 OBD2 scanner showing a "View Freeze Frame" screen with various diagnostic parameters like DTCFRZF, FUELSYS1, LOAD_PCT, and SHRTFT1.
What's in the Box
- V318 Scanner
- User Manual
- Packing box
Image: A visual representation of the Outzone V318 product package, showing the scanner device, its user manual, and the retail box.
Setup and Connection
The Outzone V318 is designed for ease of use with its plug-and-play functionality. Follow these steps to connect the device to your vehicle:
- Locate your vehicle's OBDII port. This port is typically found under the dashboard on the driver's side.
- Ensure your vehicle's ignition is turned off before connecting the scanner.
- Plug the V318 scanner's OBDII connector firmly into the vehicle's OBDII port.
- Turn your vehicle's ignition to the "ON" position (do not start the engine yet, unless instructed by a specific diagnostic procedure). The scanner will power on automatically.
- Once powered on, the device is ready for operation.
Image: The Outzone V318 OBD2 scanner highlighting its 1.8-inch color screen, universal OBD plug, and control buttons (up, down, ESC, I/M, OK) for easy navigation.
Operating Instructions
The V318 offers a range of diagnostic functions accessible through its intuitive interface. Use the navigation buttons (Up, Down, ESC, I/M, OK) to select and confirm options on the 1.8-inch color screen.
Key Functions:
- Read Codes: Quickly retrieve current, pending, and permanent diagnostic trouble codes (DTCs) from the vehicle's engine control unit (ECU).
- Erase Codes: Clear the engine malfunction indicator light (MIL) and stored DTCs after repairs have been made.
- View Freeze Frame: Access a snapshot of vehicle operating conditions recorded at the moment a fault code was set.
- I/M Readiness: Check the status of emission-related monitors to determine if the vehicle is ready for an emissions test.
- Vehicle Info: Display vehicle identification number (VIN), calibration ID (CALID), and calibration verification number (CVN).
- Data Stream: View real-time live data parameters from the vehicle's sensors and components.
- RealTime Curve: Graphically display live data parameters for easier analysis.
- O2 Sensor Test: Retrieve O2 sensor monitor test results.
- EVAP System Test: Initiate a test of the evaporative emission control system.
- Battery Voltage Reading: Monitor the vehicle's battery voltage.
- Fault Code Query: Look up definitions for specific diagnostic trouble codes.
Image: The Outzone V318 OBD2 scanner's main screen showing icons for OBD II, Battery, DTC Lookup, and Setup, alongside a list of its comprehensive functions including Read Codes, Erase Codes, View Freeze Frame, and more.
Supported Languages:
The V318 supports 10 languages for user convenience:
- English
- Dutch
- Spanish
- French
- Italian
- Russian
- Chinese
- Japanese
- Korean
- German
Image: The Outzone V318 OBD2 scanner displayed alongside flags of the 10 national languages it supports, including English, Chinese, French, Spanish, German, Russian, Italian, Japanese, and Korean.
Maintenance
The Outzone V318 OBD2 scanner requires minimal maintenance. To ensure its longevity and proper function:
- Keep the device clean by wiping it with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Protect the OBDII cable and connector from damage. Avoid bending or twisting the cable excessively.
- Do not attempt to disassemble the device, as this will void the warranty and may cause damage.
Troubleshooting
If you encounter issues while using the Outzone V318, consider the following common scenarios:
- Device does not power on:
- Ensure the OBDII connector is securely plugged into the vehicle's OBDII port.
- Verify that the vehicle's ignition is in the "ON" position.
- Check the vehicle's battery voltage. The device requires 12V power from the vehicle.
- No communication with vehicle:
- Confirm that your vehicle is OBDII compliant. The V318 is compatible with all vehicles meeting OBDII standards.
- This product is not compatible with new energy vehicles, hybrid vehicles, diesel vehicles, or non-OBD2 agreement models.
- Ensure the ignition is on and the engine is off, or running, as required by the specific diagnostic function.
- Try connecting the scanner to a different OBDII compliant vehicle to rule out a vehicle-specific issue.
- Incorrect or unexpected data readings:
- Ensure the vehicle's engine is at operating temperature for accurate sensor readings.
- Verify that the correct diagnostic function is selected on the scanner.
- Consult your vehicle's service manual for specific parameter ranges.
Image: The Outzone V318 OBD2 scanner's screen showing a diagnostic menu, a trouble code (P0230 Fuel Pump Primary Circuit), and detailed O2 sensor readings, demonstrating its capability for fast and accurate detection.
Image: A collage illustrating the practical benefits of the Outzone V318, including its use for engine troubleshooting and clearing codes, performing auto breakdown self-checks, and ultimately helping users avoid high maintenance costs.
Specifications
| Parameter | Value |
|---|---|
| Model | V318 |
| Item Weight | 6.9 ounces (198g with packaging) |
| Product Dimensions (L x W x H) | 5.12 x 2.75 x 0.98 inches (130 x 70 x 25mm) |
| Display Resolution | 160x128 pixels |
| Operating System | OBD2 |
| Operating Voltage | 12V |
| Operating Temperature | -20°C to 60°C (-4°F to 140°F) |
| Storage Temperature | -30°C to 70°C (-22°F to 158°F) |
| Country of Origin | China |
| Supported Protocols |
|
Image: A table detailing the product parameters of the Outzone V318, including its model number, supported protocols, operating and storage temperatures, operating voltage, product size, weight, and supported languages.
Warranty and Support
The Outzone V318 OBD2 Automobile Fault Diagnosis Instrument comes with a 1-year warranty from the date of purchase.
For any questions, technical assistance, or warranty claims, please contact Outzone customer support. It is recommended to provide your order number for faster service.
You can typically find support contact information through the seller's store page on Amazon or by replying to your order confirmation email.