Introduction
This manual provides essential information for the replacement of LED backlight strips in compatible 48-inch televisions. These replacement strips are designed to restore the display's illumination, ensuring optimal viewing experience. Please read all instructions carefully before proceeding with installation.
Safety Information
- Electrical Hazard: Always disconnect the television from the power outlet before beginning any repair or replacement work.
- Professional Installation Recommended: Replacing TV backlight strips involves working with delicate electronic components and can be complex. It is highly recommended that this procedure be performed by a qualified technician.
- Handle with Care: LED strips are fragile. Avoid bending, twisting, or applying excessive pressure to the strips or individual LED beads.
- Static Electricity: Take precautions against electrostatic discharge (ESD). Use an anti-static wrist strap and work on an anti-static mat if possible.
- Component Compatibility: Ensure the replacement strips are compatible with your specific TV model. Refer to the model numbers provided.
Product Overview
The DIREBECA 48" TV LED backlight replacement set consists of multiple LED strips designed to illuminate the LCD panel from behind. Each strip contains multiple LED beads that emit light when powered.
Figure 1: Complete set of 8 LED backlight strips. These strips are typically installed horizontally across the back of the TV's LCD panel.
Figure 2: Detailed view of the individual LED beads on a single strip. Each strip features 5 LED beads, providing uniform illumination.
Figure 3: The reverse side of the LED strips, displaying model and part numbers such as TOT-48D2700-8X5-3030C-V3, crucial for compatibility verification.
Figure 4: An individual LED backlight strip, demonstrating its slender profile and connection points. The length of each strip is approximately 490mm.
Setup and Installation
Disclaimer: This section provides general guidance. Specific disassembly and reassembly procedures vary significantly between TV models. Always consult your TV's service manual or seek professional assistance.
- Preparation:
- Disconnect the TV from all power sources and external devices.
- Place the TV face down on a soft, clean, and stable surface to prevent screen damage.
- Gather necessary tools: screwdrivers, plastic prying tools, anti-static wrist strap.
- Disassembly:
- Carefully remove the TV's back cover.
- Disconnect all cables and ribbons connected to the main board and power supply board.
- Remove the internal components (main board, power supply, speakers, etc.) to access the LCD panel.
- Extreme caution is required when removing the LCD panel and diffuser layers. These components are very fragile.
- LED Strip Replacement:
- Locate the old LED backlight strips. They are usually adhered to the metal chassis.
- Gently peel off the old strips, ensuring no residue is left behind.
- Clean the surface where the new strips will be placed.
- Carefully align and adhere the new LED strips (1 set = 8 pieces) in their correct positions. Ensure all connectors are properly aligned.
- Connect the new LED strips to the power supply board.
- Testing:
- Before reassembling the entire TV, temporarily connect the power supply and main board.
- Plug in the TV and power it on briefly to confirm the new LED strips illuminate correctly and uniformly. Immediately power off and disconnect.
- Reassembly:
- Carefully reassemble the diffuser layers and LCD panel, ensuring no dust or fingerprints are trapped.
- Reinstall all internal components and reconnect all cables.
- Replace the TV's back cover and secure all screws.
Operating
Once the DIREBECA LED backlight strips are correctly installed and the television is fully reassembled, the operation of the backlight system is integrated with the TV's normal functions. The backlight will illuminate automatically when the TV is powered on, providing the necessary light for the display. No separate operation or control is required for the backlight strips themselves.
Maintenance
These LED backlight strips are designed to be maintenance-free once installed. However, proper handling during installation and general care for your television will prolong their lifespan:
- Dust Prevention: Keep the TV's internal components free from dust accumulation, which can lead to overheating. Ensure the TV's ventilation openings are clear.
- Temperature Control: Avoid exposing the TV to extreme temperatures or direct sunlight, which can degrade electronic components over time.
- Gentle Handling: If the TV needs to be moved, do so carefully to avoid internal component shifts or damage.
Troubleshooting
If you encounter issues after replacing the LED backlight strips, consider the following:
- No Backlight / Dark Screen:
- Verify all LED strip connectors are securely seated on the power supply board.
- Check for any visible damage to the new LED strips (e.g., bent or broken LEDs).
- Ensure the power supply board is functioning correctly. A faulty power supply board can prevent the backlights from illuminating.
- Confirm the TV's main board is sending the correct signals to the power supply board.
- Uneven Brightness / Dark Spots:
- Check if all LED strips are properly aligned and fully adhered to the chassis.
- Inspect individual LED beads for any non-illuminating or dim LEDs.
- Ensure the diffuser sheets and LCD panel are reinstalled correctly and without any foreign objects or misalignment.
- Flickering Backlight:
- This could indicate a loose connection or a faulty LED strip. Recheck all connections.
- A failing power supply board or LED driver circuit can also cause flickering.
If troubleshooting steps do not resolve the issue, professional diagnosis and repair are recommended.
Specifications
| Attribute | Detail |
|---|---|
| Product Type | TV LED Backlight Strips |
| Compatible TV Size | 48 inches |
| Strip Length | Approximately 490mm (19.3 inches) |
| Number of LED Beads per Strip | 5 beads |
| Voltage per Lamp (LED) | 6V |
| Package Contents | 1 set = 8 pieces of LED strips |
| Certification | C |
| Model Number (Internal) | TK2 |
Warranty and Support
As these are replacement components, warranty terms may vary depending on the retailer and specific purchase conditions. Please refer to your purchase receipt or contact the seller directly for information regarding warranty coverage and return policies.
For technical support or complex installation queries, it is advisable to consult with a professional TV repair technician or contact the original TV manufacturer's support channels, as this product is a component for repair rather than a standalone device.
