Outsunny 3-Piece Garden Bistro Set Instruction Manual

1. Introduction

Thank you for choosing the Outsunny 3-Piece Garden Bistro Set. This set includes two comfortable chairs and one round table, designed for outdoor use. This manual provides essential information for safe assembly, proper use, and effective maintenance of your new garden furniture. Please read these instructions carefully before assembly and retain them for future reference.

2. Safety Instructions

• Assembly: Assemble the product carefully to ensure stability. Ensure all bolts and screws are securely tightened before use.
• Weight Capacity: Do not exceed the maximum recommended load: 50 kg (110 lbs) for the table and 130 kg (286 lbs) for each chair. Overloading can cause damage or injury.
• Placement: Place the furniture on a flat, stable surface to prevent tipping.
• Children: Keep children away from the assembly area. Do not allow children to climb or play on the furniture unsupervised.
• Inspection: Regularly inspect all components for wear, damage, or loose connections. Discontinue use if any damage is found and replace parts as necessary.
• Weather Conditions: While designed for outdoor use, prolonged exposure to extreme weather conditions (heavy rain, strong winds, direct sunlight) may reduce the product's lifespan. Consider covering or storing the set during harsh weather.

3. Package Contents

Before beginning assembly, ensure all parts are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.

• 2 x Chairs (Steel frame, breathable fabric seat and back)
• 1 x Round Table (Steel frame, metal tabletop)
• Assembly Hardware (Screws, bolts, washers, Allen key - typically included)

4. Setup and Assembly

Assembly is required for this garden bistro set. It is recommended to have two people for assembly to ensure ease and safety. Lay out all components on a soft, clean surface to prevent scratches.

4.1 Chair Assembly

1. Identify the chair frame components: seat frame, backrest frame, and armrests.
2. Attach the breathable fabric seat and backrest to their respective frames using the provided hardware. Ensure the fabric is taut and evenly stretched.
3. Connect the armrests to the seat and backrest frames. Do not fully tighten screws until all components are loosely assembled.
4. Once all parts are in place, gradually tighten all screws evenly. Avoid overtightening.
5. Repeat for the second chair.

4.2 Table Assembly

1. Identify the table legs and the round tabletop.
2. Attach the table legs to the underside of the tabletop using the provided hardware.
3. Ensure the legs are securely fastened and the table is stable. The table may feature adjustable feet for uneven surfaces.

After assembly, gently test the stability of both chairs and the table before full use.

5. Operating Instructions (Usage)

This garden bistro set is designed for comfortable outdoor seating and dining for two people.

• Seating: The chairs feature a spacious seat, elegant armrests, and a high backrest with breathable textilene fabric for comfort.
• Table Use: The round table is suitable for holding drinks, snacks, or small decorative items. Ensure items placed on the table do not exceed the 50 kg weight limit.
• Adjustable Feet: The table may include adjustable feet to ensure stability on slightly uneven outdoor surfaces. Adjust as needed to prevent wobbling.

6. Maintenance and Care

Proper maintenance will extend the life and appearance of your garden bistro set.

• Cleaning: Wipe the table and chair frames with a damp cloth. For the breathable fabric, a mild soap solution and water can be used, followed by rinsing with clean water and air drying. Avoid harsh chemicals or abrasive cleaners.
• Rust Prevention: The steel frame is powder-coated for resistance. However, to prevent rust, especially in humid environments, ensure the furniture is kept dry. Address any scratches or chips in the coating promptly.
• Storage: During off-seasons or periods of non-use, it is recommended to cover the furniture or store it in a dry, sheltered area to protect it from the elements.
• Fasteners: Periodically check all screws and bolts to ensure they remain tight. Retighten if necessary.

7. Troubleshooting

• Wobbling Table/Chairs: Check if the furniture is on an even surface. For the table, adjust the leveling feet if present. Ensure all assembly screws are fully tightened.
• Difficulty During Assembly: If parts do not align easily, do not force them. Loosen all screws, realign the components, and then retighten. Refer to the assembly diagrams.
• Stains on Fabric: For minor stains, use a mild soap and water solution with a soft brush. Rinse thoroughly and air dry.

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the retailer's policy or contact Outsunny customer service directly. Keep your purchase receipt as proof of purchase.

For further assistance, please visit the Outsunny brand store or contact your point of purchase.