Rosco Vision 815D/4
AccuStyle 7" x 4" Convex Mirror Carrier and Motor Assembly
Model: 815D/4
Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your Rosco Vision AccuStyle 7" x 4" Convex Mirror Carrier and Motor Assembly, Model 815D/4. This assembly is designed to enhance visibility and safety in commercial and fleet vehicle applications through its wide-angle convex lens and integrated motorized adjustment.
Safety Information
Always prioritize safety during installation and operation. Failure to follow these guidelines may result in injury or damage to the product or vehicle.
- Ensure the vehicle's power is disconnected before beginning any installation or maintenance work to prevent electrical shock.
- Wear appropriate personal protective equipment (PPE), such as safety glasses and gloves, during installation.
- Verify that all connections are secure and properly insulated to prevent short circuits.
- Do not obstruct the driver's view or interfere with vehicle controls during installation or operation.
- Consult a qualified professional if you are unsure about any installation steps.
What's in the Box
Your AccuStyle Mirror Carrier and Motor Assembly package should contain the following:
- AccuStyle 7" x 4" Convex Mirror Carrier and Motor Assembly (PN: 815D/4)
Please inspect all components upon receipt to ensure no items are missing or damaged.
Setup and Installation
The AccuStyle Mirror Carrier and Motor Assembly is designed for integration into existing Rosco AccuStyle mirror systems. Professional installation is recommended.
Installation Steps:
- Prepare the Vehicle: Park the vehicle on a level surface and engage the parking brake. Disconnect the vehicle's battery to prevent accidental power surges during installation.
- Remove Existing Components (if applicable): Carefully remove any existing mirror components from the AccuStyle housing that are being replaced.
- Position the Assembly: Align the new AccuStyle 7" x 4" Convex Mirror Carrier and Motor Assembly within the mirror housing. Ensure it seats correctly and securely.
- Secure the Assembly: Use appropriate fasteners (not included, typically part of the existing AccuStyle system) to secure the carrier and motor assembly firmly in place. Do not overtighten.
- Connect Electrical Wiring: Locate the electrical connector on the mirror assembly. Connect it to the corresponding wiring harness in the vehicle's mirror system. Ensure a secure and proper connection.
- Reconnect Power: Once all connections are secure, reconnect the vehicle's battery.
- Test Functionality: Turn on the vehicle's ignition and test the motorized adjustment of the mirror from within the cab. Ensure the mirror moves smoothly in all directions.
Operating Instructions
The AccuStyle Mirror Carrier and Motor Assembly features motorized adjustment, allowing drivers to remotely position the mirror for optimal rear and side visibility.
- Mirror Adjustment: Use the vehicle's integrated mirror control switch (typically a joystick or directional buttons) to adjust the mirror's angle.
- Optimal View: Adjust the convex mirror to provide the widest possible field of view, minimizing blind spots.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your mirror assembly.
- Cleaning: Clean the mirror surface regularly with a soft cloth and a mild glass cleaner. Avoid abrasive materials that could scratch the mirror.
- Housing Inspection: Periodically inspect the black housing for any signs of damage, cracks, or loose fasteners. Address any issues promptly.
- Electrical Connections: Occasionally check the electrical connections for corrosion or looseness. Ensure they remain secure and clean.
- Motor Function: Test the motorized adjustment periodically to ensure smooth operation. If the motor becomes sluggish or unresponsive, consult a qualified technician.
Troubleshooting
If you encounter issues with your AccuStyle Mirror Carrier and Motor Assembly, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Mirror does not adjust | No power to the mirror; Loose electrical connection; Faulty motor. | Check vehicle's fuse box for blown fuses related to mirrors. Verify all electrical connections are secure. If connections are good, the motor may need replacement by a professional. |
| Mirror moves intermittently | Poor electrical connection; Corroded terminals. | Inspect electrical connections for looseness or corrosion. Clean terminals if necessary. |
| Excessive vibration or noise | Loose mounting; Damaged internal components. | Ensure the assembly is securely mounted within the mirror housing. If the issue persists, internal damage may require professional inspection. |
Specifications
| Feature | Detail |
|---|---|
| Product Name | AccuStyle 7" x 4" Convex Mirror Carrier and Motor Assembly |
| Model Number | 815D/4 |
| Brand | Rosco Vision |
| Mirror Type | Convex |
| Mirror Size | 7 inches x 4 inches |
| Function | Motorized Adjustment |
| Assembly Type | Mirror carrier with integrated motor |
| Material | Weather-resistant plastic housing |
| Color | Black |
| Mount Compatibility | Rosco AccuStyle system |
| Auto Part Position | Outside |
| Fit Type | Vehicle Specific Fit |
Warranty and Support
For information regarding product warranty, technical support, or replacement parts, please refer to the official Rosco Vision website or contact their customer service directly. Keep your purchase receipt as proof of purchase.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.