Introduction
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your Omax Decor Jaxon Upholstered Platform Bed. Please read this manual thoroughly before beginning assembly or use to ensure proper setup and longevity of your product.
Figure 1: Omax Decor Jaxon Upholstered Platform Bed (Queen Size, White Boucle)
Safety Information
Always follow basic safety precautions when assembling and using this product to reduce the risk of injury or damage.
- Ensure all parts are present and undamaged before assembly.
- Assemble on a soft, clean surface to prevent scratching.
- Do not overtighten screws during assembly.
- Keep small parts away from children.
- Do not stand or jump on the bed frame.
- Maximum weight capacity: 500 lbs.
Package Contents
Verify that all components listed below are included in your package. If any parts are missing or damaged, please contact customer support.
| Part | Description | Quantity |
|---|---|---|
| Headboard | Upholstered headboard with vertical channel tufting | 1 |
| Footboard | Upholstered footboard | 1 |
| Side Rails | Upholstered side rails | 2 |
| Wooden Slats | Full width wooden slats for mattress support | 13 |
| Center Support Legs | Adjustable legs for central support | 3 |
| Hardware Pack | Screws, bolts, washers, Allen wrench | 1 |
Setup and Assembly
Assembly is required for this product. It is recommended that two adults assemble the bed. Please refer to the included hardware pack for specific fasteners.
- Unpack Components: Carefully remove all components from the packaging and lay them out on a clean, soft surface to prevent damage. Identify all parts against the "Package Contents" list.
- Attach Side Rails to Headboard: Align the side rails with the pre-drilled holes on the headboard. Secure them using the provided bolts and washers. Do not fully tighten yet.
- Attach Side Rails to Footboard: Connect the other end of the side rails to the footboard in the same manner. Ensure the frame is square before tightening all bolts securely.
- Install Center Support Legs: Attach the center support legs to the central beam (if applicable) or directly to the frame as indicated in the diagram. Adjust their height to ensure even support.
- Place Wooden Slats: Lay the wooden slats across the bed frame, ensuring they are evenly spaced and secured into the designated slots or with provided fasteners. The slat system provides direct mattress support, eliminating the need for a box spring.
- Final Check: Verify that all connections are tight and the bed frame is stable.
Figure 2: Queen Size Dimensions and Key Features
Operating Instructions
The Jaxon Upholstered Platform Bed is designed for use with a standard Queen size mattress. No box spring is required due to the integrated wooden slat system.
- Place your mattress directly onto the wooden slats. The bed features a 4-inch mattress inset to keep the mattress securely in place.
- Ensure the mattress is centered on the frame for optimal support and appearance.
- The bed is designed for sleeping and resting purposes. Avoid excessive force or jumping on the bed.
Maintenance and Care
Proper care will help maintain the appearance and longevity of your upholstered platform bed.
- Cleaning Fabric: For general cleaning, gently vacuum the boucle fabric with an upholstery attachment to remove dust and debris.
- Spot Cleaning: For spills, blot immediately with a clean, dry cloth. Do not rub. For stubborn stains, use a mild fabric cleaner specifically designed for upholstery, testing on an inconspicuous area first.
- Frame Care: Periodically check all bolts and screws to ensure they remain tight. Retighten if necessary.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight may cause fabric fading.
- Avoid Harsh Chemicals: Do not use abrasive cleaners or strong chemical solutions on any part of the bed.
Troubleshooting
If you encounter any issues with your Jaxon Upholstered Platform Bed, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed feels wobbly or unstable. | Loose connections or uneven support legs. | Ensure all bolts are securely tightened. Adjust center support legs to ensure they are firmly on the floor and providing even support. |
| Squeaking noises. | Loose connections or friction between parts. | Retighten all assembly bolts. Check if slats are properly seated and not rubbing against the frame. |
| Mattress shifting. | Mattress not properly aligned or bed not level. | Ensure the mattress is fully seated within the 4-inch inset. Check if the bed frame is on a level surface. |
Specifications
- Model: BU1300W
- Size: Queen
- Color: White Boucle
- Product Dimensions (L x W x H): 86.2" x 66.1" x 39.4"
- Product Weight: 127.5 lbs
- Bed Weight Capacity: 500 lbs
- Mattress Inset: 4 inches
- Clearance - Floor to Bottom: 2 inches
- Assembly Required: Yes
- Box Spring Required: No
- Manufacturer: Omax Decor
- UPC: 810135830386
Warranty and Support
For information regarding warranty coverage or to obtain support for your Omax Decor Jaxon Upholstered Platform Bed, please contact Omax Decor customer service directly. You may also visit the official Omax Decor store on Amazon for additional resources and contact details.
Omax Decor Store: Visit Omax Decor Store on Amazon