NEWSEE Cordless LED 12-inch Table Lamp (Model AMZ-TBL-024) - Instruction Manual

1. Introduction

Thank you for purchasing the NEWSEE Cordless LED 12-inch Table Lamp. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new lamp. Please read this manual thoroughly before use and retain it for future reference.

2. Package Contents

Ensure all items listed below are present in your package:

• Table Lamp × 2
• USB Type-C cable × 2
• Instruction Manual × 1

3. Product Overview

The NEWSEE Cordless LED Table Lamp is designed for versatility and convenience, offering ambient lighting for various environments.

Key Features:

• Portable Cordless Design: No power cord required, allowing placement anywhere.
• Easy Touch Control: Stepless dimming and 3 color temperature modes (white, warm white, warm light) via a touch sensor on the lampshade top.
• Rechargeable Battery: Built-in 4000mAh battery provides up to 8 hours at 100% brightness or over 24 hours at low brightness.
• Durable Material: Lampshade, pole, and base made of iron, suitable for indoor and outdoor use.
• Compact Size: H12 x φ4.8 inch, 1.2 lbs.

Image: Two black NEWSEE cordless LED table lamps, showcasing their sleek design.

Image: A display of NEWSEE cordless LED table lamps in different colors, highlighting their compact size and ambient light.

4. Setup

Assembly:

1. Unpack all components from the box.
2. Screw the lamp base onto the bottom of the stem.
3. Screw the lampshade onto the top of the stem.
4. Ensure all connections are secure.

Initial Charging:

• Locate the Type-C charging port on the underside of the lampshade.
• Connect the provided USB Type-C cable to the lamp and a 5V-2A/1A power adapter (not included).
• The indicator light will turn RED during charging and GREEN when fully charged.
• Allow 4-6 hours for a full charge before first use.

Image: Detailed diagram illustrating the lamp's dimensions (12 inches height, 4.8 inches diameter) and the location of the Type-C charging port.

5. Operating Instructions

Touch Control Functionality:

• Power On/Off: Lightly tap the touch sensor located on the top of the lampshade to turn the lamp on or off.
• Change Color Temperature: With the lamp on, short press the touch sensor to cycle through the 3 color temperature modes: White Light, Warm White Light, and Warm Light.
• Adjust Brightness (Stepless Dimming): With the lamp on, long press the touch sensor to adjust the brightness from 5% to 100%. Release when the desired brightness is reached.

Note: This lamp is designed as an auxiliary ambient night light and is not intended for use as a primary lighting source.

6. Maintenance

• Cleaning: Wipe the lamp with a soft, dry cloth. Avoid using abrasive cleaners or solvents that may damage the finish.
• Battery Care: To prolong battery life, avoid fully discharging the lamp frequently. Recharge the lamp when the light output becomes noticeably dim. If storing for an extended period, charge the lamp fully every 3 months.
• Water Resistance: The lamp is designed for indoor and outdoor use and is waterproof. However, avoid submerging it in water.

7. Troubleshooting

If you encounter any issues not listed here or if the problem persists after attempting the solutions, please contact NEWSEE customer support for assistance.

8. Specifications

9. Safety Information

• Do not disassemble or modify the lamp.
• Keep away from extreme temperatures and direct sunlight.
• Use only the provided charging cable or a compatible 5V-2A/1A USB adapter.
• Keep out of reach of children.
• Dispose of batteries according to local regulations.

10. Warranty and Support

NEWSEE products are manufactured with high-quality materials and craftsmanship. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official NEWSEE website.

We are committed to providing excellent customer service and will assist you with any questions or concerns.