1. Product Overview
The AROEVE MK07 Air Purifier is designed to provide superior air purification for large rooms, effectively removing tiny particles, pollutants, pet dander, pollen, and odors. It features a 5-layer filtration system, smart air quality monitoring, and quiet operation.
Figure 1.1: AROEVE MK07 Air Purifier, showcasing its design and suitability for homes with pets.
Figure 1.2: The AROEVE MK07 Air Purifier provides superior air purification for large rooms, covering up to 1504 sq ft with a CADR of 300 m³/h.
2. Safety Instructions
To ensure safe operation and prevent damage, please read and follow all safety instructions before using the appliance.
- Always unplug the air purifier before moving it, cleaning it, or replacing the filter.
- Do not operate the appliance with a damaged cord or plug.
- Keep the air inlet and outlet clear of obstructions.
- Do not use the appliance in wet or high-humidity environments.
- This appliance is for indoor use only.
- Keep out of reach of children and pets.
- Only use genuine AROEVE replacement filters.
3. Setup and Installation
Follow these steps to set up your AROEVE MK07 Air Purifier:
- Unpack the Air Purifier: Carefully remove the air purifier from its packaging.
- Remove Filter Packaging: Open the filter compartment and remove the plastic packaging from the filter. Failure to remove the plastic packaging will prevent the unit from functioning correctly and may pose a fire hazard.
- Install the Filter: Insert the filter back into the compartment, ensuring it is seated correctly. Close the filter compartment cover securely.
- Position the Unit: Place the air purifier on a flat, stable surface. Ensure there is at least 6 inches (15 cm) of space around all sides for optimal airflow. The compact design allows it to be placed against a wall.
- Connect Power: Plug the power cord into a standard electrical outlet.
Figure 3.1: The 5-stage advanced filtration system, including washable pre-filter, outer pre-filter, middle filter, and activated carbon filter.
4. Operating Instructions
The AROEVE MK07 features a smart touchscreen for easy operation.
4.1 Power On/Off
- Press the Power Button on the control panel to turn the unit on or off.
4.2 Modes and Fan Speed
- Auto Mode: Press the Auto Mode Button. The air purifier will automatically adjust its fan speed based on the detected air quality.
- Manual Fan Speed: Press the Fan Speed Button to cycle through different fan speeds (e.g., Low, Medium, High).
- Sleep Mode: Press the Sleep Mode Button. The unit will operate at its lowest fan speed (23 dB) and dim the display lights for undisturbed rest.
Figure 4.1: The air purifier features an ultra-silent sleep mode, operating at a quiet 23 dB for comfortable night use.
4.3 Air Quality Indicator
The integrated laser sensors provide real-time air quality readings, accurately measuring PM1, PM2.5, and PM10 levels. The display will show the current air quality status.
Figure 4.2: High precision laser dust sensor and AUTO Mode for precise detection of PM1, PM2.5, and PM10, enabling faster automatic purification.
4.4 UV Protection (RayGuard Pro Technology)
The RayGuard Pro technology provides an additional layer of defense by helping to reduce harmful particles in the air without ozone release. This feature is activated by a light touch button on the control panel.
Figure 4.3: RayGuard Pro Air Purification System eliminates allergens and pollutants with zero ozone release.
4.5 Timer Function
Set the air purifier to operate for a specific duration (e.g., 4, 8, 12, 24 hours) using the timer function on the control panel. The unit will automatically turn off after the set time.
Figure 4.4: The air purifier features a 24-hour timer for convenient operation.
5. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your air purifier.
5.1 Filter Replacement
The main filter (non-washable) should be replaced every 4-8 months, depending on usage and air quality. The unit may have a filter replacement indicator. Always use genuine AROEVE MK07 replacement filters to avoid damage and ensure proper filtration.
5.2 Washable Pre-Filter Cleaning
The washable pre-filter should be regularly checked and cleaned to remove pet hair, dust, and other large particles. This extends the lifespan of the main filter.
- Turn off and unplug the air purifier.
- Open the filter compartment and carefully remove the washable pre-filter.
- Rinse the pre-filter under running water or use a soft brush/vacuum to remove accumulated debris.
- Ensure the pre-filter is completely dry before reinstalling it.
Figure 5.1: The washable pre-filter can be easily cleaned to extend its lifespan and maintain purification efficiency.
Figure 5.2: The washable pre-filter is designed for easy cleaning, helping to tackle pet hair and extend filter life.
5.3 Sensor Cleaning
Periodically clean the air quality sensor to ensure accurate readings. Use a soft, dry cloth or cotton swab to gently wipe the sensor opening.
6. Troubleshooting
If you encounter issues with your AROEVE MK07 Air Purifier, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on | Not plugged in; Power outage; Filter plastic not removed; Unit damaged. | Ensure power cord is securely plugged in. Check power outlet. Verify filter plastic packaging has been removed. If issues persist, contact customer support. |
| Air quality not improving / Low airflow | Filter is dirty or clogged; Filter plastic not removed; Air inlets/outlets blocked; Room size exceeds coverage. | Clean or replace filters as needed. Ensure filter plastic is removed. Clear any obstructions from air inlets/outlets. Ensure unit is used within recommended room size (up to 1504 sq ft). |
| Unusual noise | Filter not installed correctly; Foreign object inside; Unit on uneven surface. | Check filter installation. Turn off and unplug, then inspect for foreign objects. Place unit on a flat, stable surface. |
| Display lights are off in Sleep Mode | This is normal operation. | The display lights are designed to dim or turn off in Sleep Mode for undisturbed rest. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | MK07 |
| Product Dimensions (L x W x H) | 12.4 x 16.2 x 6.69 inches |
| Weight | 8.26 Pounds |
| Coverage Area | Up to 1504 ft² |
| CADR (Clean Air Delivery Rate) | 176 CFM / 300 m³/h |
| Noise Level (Sleep Mode) | 23 dB |
| Filtration System | 5-Layer Filter (Washable Pre-Filter, Outer Pre-Filter, Middle Filter, Activated Carbon Filter, RayGuard Pro UV) |
| Power Consumption | 35 watts |
| Certifications | ETL Certified, Zero Ozone Verified |
Figure 7.1: Product dimensions of the AROEVE MK07 Air Purifier.
8. Warranty and Support
For warranty information and customer support, please refer to the official AROEVE website or contact their customer service directly.
- Official User Guide (PDF): Download PDF
- Visit the AROEVE Store: AROEVE Amazon Store
